Latest bathing platform Tenders | Government bathing platform Tenders

Central Government/Public Sector

CTN :39577808

22 Mar, 2025 7.00 Lacs

Jodhpur - Rajasthan

Tender For special repair for replacement of ceiling fans against ber ceiling fans at defence lab under age (i) r and d jodhpur

Central Government/Public Sector

CTN :39602031

17 Mar, 2025 12.57 Lacs

Sonbhadra - Uttar Pradesh

Tender For annual maintenance and repair of air conditioners, water coolers, refrigerators at vtc, coal lab, chp, east and west section and workshop area of dudhichua mine.

State Government

CTN :39576967

15 Mar, 2025 3.95 Lacs

Chandigarh - Chandigarh

Tender For repair of lab no h-12 and h-13 due to fire incident in the deptt of haematology , level-5, research block b , sec-12,pgimer composite work sh civil and electrical work

CTN :39601044

13 Mar, 2025 2.67 Lacs

Chandigarh - Chandigarh

Tender For annual repair for non residential various buildings in campus of pec (extension to single storey lab, old administrative block, auditorium block), sector 12, chandigarh (deemed to be university) for the year 2024-25.

CTN :39573703

15 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - project lab iot automation and robotics aiml; project lab iot automation and robotics aiml; supplier

CTN :39557280

14 Mar, 2025 6.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557285

14 Mar, 2025 60.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557288

14 Mar, 2025 6.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive - vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557289

14 Mar, 2025 1.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- retail dhermas- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557291

14 Mar, 2025 1.00 Lacs

Bikaner - Rajasthan

Tender For vocation educaton lab item- retail khiyera- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

Bathing Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government