Latest battan cane Tenders | Government battan cane Tenders

Central Government/Public Sector

CTN :39645418

03 Apr, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and

CTN :39498484

31 Mar, 2025 NA

Agra - Uttar Pradesh

Tender For bid to ras supply of ces 5040 - graphite powder , wire steel spring 19 swg 1.00 mm ,stainless steel hexagonal self locking nut m6 x 1 af 10mm ,stainless steel hexagonal nut m6 x 1 af 10 mm , wire steelspring 18 swg 1.2 mm , wire steel spring 12 swg 2.64 mm ,steel ball no 06 , wire steel spring 22 swg 0.71 mm dia ,steel ball no 5.50 mm dia , alluminium flat 19 mm x 12 mm, cane molassess is 1162 , stainless steel roung rod free cutting 30 mm grade 304 , stainless steel roung rod freecutting 10 mm grade 304 , steel rope wire 1.9 mm fine twist, copper round rod 6.3 mm , stainless steel free cutting 1.65mm thick grade 304 , teflon sleeve 2.0 mm dia , polythenemoulding powder hd black , alluminium bar flat 1 by 2 inchx 1 by 4 inch , alluminium bar flat 16 x 30 mm , mild steelhex bar af 5 by 16 inch 8 mm , steel bar mild flat 40 mm x13 mm

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

Central Government/Public Sector

CTN :39849654

16 Apr, 2025 30.00 Lacs

Bangalore - Karnataka

Tender For tender for supply of vegitables and fruits. - ash guard , beetroot , beans , brinjal , bottle guard , cabbage , carrot , cauli flower , coconut , coriander leaves , cucumber , curry leaves , drumsticks , ginger , sambar cucumber , green chilly , lady's finger , lemon , gentleman toe , onion , potato , pudhina , garlic, radish , ridge guard , chow chow , snake guard , yam , pumpkin , tomato hybrid , palak leaves , capsicum , raw mango , turnip , creaper beans , bhajji chilli , raw banana , bitter guard , sweet potato , baby corn/corn, apple (kashmir) , banana pachabale medium) , orange , water melon , sweet lemon (mosambi) , papaya , grape -green , banana (yalakki) , pomegranate , sapota , guava , sugar cane (black) , pineapple , musk melon

CTN :39827810

04 Apr, 2025 NA

Kanchipuram - Tamil Nadu

Tender For ultra sonic test - l1 rate is arrvied based lumpsum basis. ( sl.no. 1 to 18) ultra sonic test for the following., cane carrier drive end & non drive and shaft, cane leveler shaft, fibrizer shaft, rake carrier shaft, mill roller shaft, under feed roller shaft, transmission shaft, bagacillo blower shaft, w.i.l. boiler s.a. fan shaft, w.i.l. boiler f.d. fan shaft, w.i.l. boiler i.d. fan shaft, bagasse carrier shafts (drive & non-drive end), texmaco boiler f.d. fan shaft, texmaco boiler i.d. fan shaft, continuous centrifugals machine shaft, a-range centrifugal machine shaft, hopper shaft, grader shaft

Central Government/Public Sector

CTN :39835009

16 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of 5 items of furniture purchase - height wooden chair for using in medical ward and pharmacy counter , revolving height chair for using heamodialysis room , mattresses of size 6 feet x 3 feet x 4 inches , pillow - standard size , steel cane chair

CTN :39835414

23 Apr, 2025 7.97 Lacs

Haliyal - Karnataka

Tender For raising of plantation in mushpand f.sy.no-162a & 166 in 25ha cane model for 2025-26

CTN :39835540

23 Apr, 2025 5.98 Lacs

Haliyal - Karnataka

Tender For maintenance of 1 year plantation in nagoda f.sy.no-24 cane model 25ha for 2025-26

Central Government And Public Sector

CTN :39837227

15 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For supply of super gasketing compound corium z-190 of 200 ml cane make: corium z/ enecon/ lupr omax or similar as per technical document attached. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :39838409

28 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For auction sale of old dvd player electronic scrap etc,old bearing scrap assorted,old cartridge scrap,old field coil with cotton tape scrap,old self pinion scrap,old iron drum 20 ltr capacity,old plastic cane 5ltr capacity,old battery scrap,old motor parts scrap assorted etc,old engine di32 mahindra with air comp. unit scrap,old broken glass scrap,old engine parts (nut/bolt) scrap,old iron scrap mixed with g.p sheet, bus door etc,old feed pump scrap,old iron structure scrap,old inlet manifold hino scrap,old aluminium scrap

Battan Cane Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others