Latest battery charging terminal Tenders | Government battery charging terminal Tenders

CTN :43397963

19 Feb, 2026 1.55 Crore

Hoshiarpur - Punjab

Tender For corrigendum : construction of electrical components of kathgarh lift irrigation scheme stage-2 for rising main 2 offtaking at burji 38810/r bist doab cana

Central Government/Public Sector

CTN :43501604

19 Feb, 2026 NA

Warangal-T - Telangana

Tender For bid to ras bid to ras bid to ras supply of electrical components d d -title-1 rheostat 100-5a , title-2 coupled inductor 172.mh- 10a , title-3 capacitor 20 , title-4 tapped inductor , title-5 digital storage oscilloscope , title-6 wattmeter , title-7 digital ammeter , title-8 digital voltmeter , title-9 three phase auto transformer , title-10 three phase resistive load bank , title-11 three phase inductive load , title-12 dual regulated power supply , title-13 ammeter 0-10 a mi type , title-14 voltmeter 0-300 - 600 v

CTN :44047582

26 Feb, 2026 70.00 Lacs

Chennai - Tamil Nadu

Tender For supply of p1. 5 flip chip indoor led video wall bezel less , 2mp indoor fixed dome cameras for internal surveillance , 4 ch nvr with storage , edge network switches 24 port or higher , ict networking passive components , split air conditioning 8 tr comfort ac , online ups 40 kva 1 hr backup , access control system rfid plus fr , manpower , electrical cabling and necessary illumination devices , fire suppression system , rodent repellent system , 42 u rack enclosures networking server rack , workspace station furnitures and fixtures , reception furnitures and fixtures , amc for iccc setup

State Government

CTN :44022453

23 Feb, 2026 NA

Dharwad - Karnataka

Tender For supply, installation, testing, and commissioning (sitc) of specialized laboratory furniture - supply and fixing of furniture work for laboratory at nfsu dharwad campus, c-frame m-island (crca) - 4560 mm (l) x 1260 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (62 sq ft) assembly of construction for work bench: c frame systems are the modern lab furniture architecture. based on a cantilevered design, c-frame systems do not need legs for support. c-frames assemblies are manufactured from standard hollow metal sections, confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components are of crca confirming to is code 513:1994. the suspended under-bench welded units are supported on heavy-duty steel frames fully carrying the load of worktops. c-frame are constructed from a rectangular pipe with a cross section of 60mm x 30 /40 mm and 1.6/2 mm thick, are without a vertical front leg to give a clean look. the c-frame legs are supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the structure has removable back panel (wherever required as per design finalization) to provide access for maintenance throughout the length of table. the structure shall be duly treated for the rust prevention and coated with epoxy powder coated (with minimum thickness of 60 micron). the horizontal frames connecting the c frames and other required frames shall be of the similar specifications. together with the c-frames and horizontal members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide one drawer two shutter with one shelf storage, 2 no wheel lockable + 2 no wheel non lockable (qty - 6) structure - 60 mm x 30 mm x 1.6 mm ms pipe (qty - 5) filler panel - removable panel 600mm to 900 mm (qty - 12) - filler panel (qty - 2) reagent rack - double side double tire reagent rack - (qty - 3) electrical module - 3m plate with 16/6 amp socket and 16 amp mcb or switch (make: havells/anchor / norysis/equivalent) (qty - 12), plinth m-wall (crca) - 1400 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (11 sq ft) material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide two shutter under sink (qty - 2) filler panel - filler panel (qty - 2) sink & tap - polypropylene sink 560x355(qty - 2) - three-way swan neck cpve & brass faucet (qty - 2), d-frame m-wall (crca) - 1200 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabine

CTN :43951107

25 Feb, 2026 13.00 Lacs

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of equipments for cnc lathe - mechanical (cad), cnc lathe machinespecifications:capacity maximum turning dia. 125 - 200 mmswing over bed 225 - 300 mmmaximum turning length 200 - 280 mmslides cross (x axis) travel 150 - 300 mmlongitudinal (z axis) travel 200 - 280 mmrapid feed (x axis) 5 - 20 m/minrapid feed (z axis) 5 - 20 m/minaccuracy positioning (x & z axis) 0.008 mmrepeatability (x & z axis) 0.01 mmmain spindle spindle nose a2-3 or a2-4 --max. bar capacity 30 32 mmchuck size 165x3jaw mmspeed range 50-3500 rpmspindle motor (servo motor) 3.7 / 5.5 kwtooling arrangement no. of tools 6 no.tool size 20x20 mmmax. boring bar capacity 25 mmwith standard accessories.terms and conditions for turning machine the controller system should be fanuc controller. a voltage stabilizer and transformer must be included in the standard accessories. video images on cd / digital media, along with hard copies of literature containing photographs and drawings explaining the technical features, shall be enclosed. a sliding door shall be provided with sufficient transparent windows to enable viewing of the machining process and to prevent chip/coolant splash. manual operation of turret indexing through push buttons shall be provided, in addition to program control. coolant delivery shall be ensured up to the tool tip in all tool holders. all electrical and electronic control cabinets and panels shall be dust- and vermin-proof. the supplier must submit a detailed list of warranty information for all components. detailed list of all alarms and indications provided on the machine shall be submitted by the supplier. the paint used on the machine shall be oil and coolant-resistant, and shall not peel off or mix with the coolant.

State Government

CTN :44011566

19 Feb, 2026 2.25 Lacs

Shimla - Himachal Pradesh

Tender For tender for sop to epctc, trial run operation and maintenance of various components of pubbar river source village group piped supply scheme at various locations under electrical division, hpsebl, jubbal. (semi turn key basis)

Central Government/Public Sector

CTN :44039125

20 Feb, 2026 NA

Kapurthala - Punjab

Tender For supply of battery charging terminal-1 housing

State Government

CTN :44010855

23 Feb, 2026 NA

Nagpur - Maharashtra

Tender For providing of facility management services - lumpsum based - panchmukhi hanuman mandir babulkheda range forest office kalmeshwar; providing and fixing electrification with all electrical components; consumables to be provided by service provider (inclusive in cont..

CTN :44010360

24 Feb, 2026 NA

Delhi - Delhi

Tender For tender for supply of m and l for searching fault location of ht ug cable 11000 volts laid in trenches ducts with the help of electronic fault locating machine comprising of surge generator pulse echo fault locator with frequency distance calculator etc incl transportation of machinery excavation in normal soil strata exposing the cable fault removal of deteriorated portion of the cable treating of cable of any size including disconnecting and re fixing cables with lugs as per direction of engineer in charge note a charges of cable fault locator and dg set including transportation charges deemed to be included in the quoted rate b necessary testing of cable after making joint will be deemed to be including in the cost of relevent item , supply jointing and testing indoor type cold shrinkable end termination cable joint including all material and accessories suitable for 3 core x 120 minus 185 sqmm xlpe cable of 11000 volts e grade complete all as specified and directed note cost of cutting of existing end termination joint deemed to be included in unit rate , m and l for cable jointing kit for 11 kv earthed grade cable for straight through cold shrink type complete with joining material and accessory suitable for 120 to 185 sqmm 3 core xlpe armored aluminum conductor cable complete all as specified and directed , supplying and laying in repair xlpe insulated screened pvc bedded galvanized steel strip or wire armoured , electrical power cable heavy duty with aluminum conductor 11000 volts grade cross sectional area 120 sqmm x 3 core complete all as specified and directed , supply and fixing in repair mccb 400 amps 3 pole 415 volt 36 ka including under voltage over voltage relay with adjutable thermal setting 80% minuse 100% all as specified and directed , m and l for complete repairing serviceing of ht 11 kv vaccum circuit breaker vcb after disconnecting of all incoming and outgoing connection checking finding of the defective spare parts removing of all moisture content with suitable grade chemical replacement of rusted nuts bolts and washer replacement of all unserviceable post insulator and repair of all busbar joints and covered with ht insulation tape complete external surface as per existing colour and quality replacemnt of all defective internal ac dc circuit wiring repair servicing of breaker trolly including motorized operating mechanism ct pt power pack and calibration of triping relays system and tripping mechanism for regulating the fault flow over current earth fault differential in sequence from down streem to receiving sub stn for accuracy and effective functioning of vcb complete all as specified and as directed note nuts bolts washer cleaning material insulation tape copper wire for circuit wiring and defective ht 11 kv 2 amp fuse carrier oiling greasing to charging spring replacement of hrc fuse 110 220 volt 5 amps setting of over current earth fault relays complete other minor items for repair of breaker shall be deemed in qouated rate replacement of major unserviceable spares accessories shall be measured and paid separately under relevant items , supply and fixing heater 230 volts ac 60 watt for 11 kv ht vcb panel complete all as specifed and as directed make heatco vileco electrical , supply and fixing in replecement of spring charging gear for 11kv vcb panel suitable for 630 400 amp complete all as specified and directed , supply and fixing vacuum interputer for ht11 kv vcbs 630 400 amps brakding capacity 13point 1 ka suitable for alstom make vcb complete all as specified and as directed , taking down and repairing overhauling of air break gang operated switch with do fuse unit 200 amp 400 amp capacity triple pole mechanically operated mounted on insulators and steel frame installed vertically horizontally replacement of broken worn out components oiling and greasing of mechanical moving parts smoothing and polishing of electric contacts with providing conducting jelly of contacts refixed the same after re

CTN :43247439

05 Jan, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : design, construction, testing, commissioning of all the components of interception and diversion based sewage treatment plant (stp) work including 05 years of operation and maintenance of the entire system.• survey, investigation, design and construction of various diversion drains of inner size 0.50m(w) x 0.50m(h) for a length of 10m, 1.00m(w) x 1.20m(h) for a length of 10m and 1.00m(w) x 1.00m(h) for a length of 210m• survey, investigation, design and construction of coarse, medium screen, grit chambers of various sizes as detailed in scope of work for each wet well.• design and construction of 3 no. wet wells with overhead pump house as per the technical specification• survey, investigation, design, supply, laying, jointing and construction of rising main (di-k9 pipe) of inner dia. 150 mm for a length of 950m and dia. 100 mm for a length of 100m• stp (2 nos) - designing (aesthetically), providing, and constructing and giving satisfactory trials of sewage treatment plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment, etc. as per the technical specification of capacity 0.50 mld of facultative aeration lagoon convensional technology including allied units for waste disposal with all civil and mechanical, electrical works involved including administration cum laboratory building of minimum carpet area of 800 sqft. complete with all electrical works.• design and construction of planted drying bed for co-treatment of faecal sludge - 4 nos. of size l- 5.00 x w- 2.00 x height as per design + free board 0.30)• boundary wall around entire stp area, internal and external electrification.• operation and maintenance (o&m) for the proposed works / entire sewerage system (proposed) for a period of 5 years after successful completion of trial run period or handing over whichever is later.

Battery Charging Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government