Latest bellow frame Tenders | Government bellow frame Tenders

Central Government/Public Sector

CTN :39950667

06 May, 2025 NA

Bikaner - Rajasthan

Tender For supply of center pivot top for blc wagon.

Central Government / Public Sector

CTN :39949353

22 Apr, 2025 NA

Multi City - Multi State

Tender For supply of center pivot pin to icf drg. no. t.-0-6-602, alt-b/14 item-1.

State Government

CTN :39924307

19 Apr, 2025 22.23 Lacs

Jalandhar - Punjab

Tender For supplying and installation of furniture for 4 no. temporary courts at existing judicial courts complex jalandhar - judges - main chair for court & retiring room - providing, supplying and placing of high back chair for dias / retiring room . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum.armrests : the armrest should be having two adjustment, height (6.0 0.5cm) and depth (6.0 0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: 360 revolving type front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort tilt tension adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angle to the chair seat / back tilting ratio of 1:2 the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron)seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75 0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0 0.5cm.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-center dia.(75.0 1.0cm. with castors.)headrest :the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20 +/- 2 .twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter.overall dimensions of chairseat height - min 45.5 to max 55.5cm, reader / steno chair: providing, supplying and placing of mid back chair reader /steno chair . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. mid back size: 36.5 cm. (w) x 55.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back

CTN :39922444

05 May, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of bogie center pivot top for boxnhl wagon to rdso drg. no. wd-97049-s-3, alt. 8, item no.2. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39848457

09 Apr, 2025 NA

Dibrugarh - Assam

Tender For supply of security plate for center pivot arrangement as per fiat drg. no. 1268843,ver-00 or latest. material conforming to austenitic steel grade iss304 with surface finish to 2d/2b.

CTN :39860315

14 Apr, 2025 NA

Kharagpur - West Bengal

Tender For supply of center pivot vertical liner for boxns wagon, as per rdso's drg no. wd-13012- s/05, alt. no. 3, item no.-4, mat. & spec.:- as per drawing. [ warranty period: 30 months after the date of deliv ery ]

CTN :39829320

09 Apr, 2025 10.60 Lacs

Bhiwandi - Maharashtra

Tender For provding and supplying furniture for b.g.p hospital urban health center in ward office no 05 bhiwandi - provding and supplying furniture for b.g.p hospital urban health center in ward office no 05 bhiwandi, item no. 1 :- providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 129231990, laminated on both sides,nova teak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. 1268/39.73, item no. 2 :- providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply and 4mm thick veneer on both sides with french polish etc. complete 1264/39.69, item no.3 :- providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm c/c and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade weight of gate 35 kilogram/smt. 1525/44.10, add 5% corporation charges, add 18 gst, item no. 1 :-providing and supplying if examinition table of size 1850 x 600 and 750 mm including foam of thickness 100mm thick for patient check up including all taxes labour charges and as per authority incharge ra, item no. 2 :- providing and fixing acrylic name board of size 8.23 x 1.22 m and 10 mm thick including main hospital name in acrylic of size 20 cm height and muncipal corporation logo including all taxes labour charges and as per authority incharge ra, item no.3 providing and supplying nylon rope safety net of 25mm x 25mm size honey comb designe including all taxes labour charges and as per authority incharge ra

corporations/Associations/Others

CTN :39816463

15 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For tender for supply of malleable spare and sheet metal components - nut (frt and middle pro shaft)(for transmission- 1515/55 bs-iv) , nut propeller shaft (for transmission- tata 1512/55 , 1618/62 bs-iii and 1618/62 bs-iv) , clutch release yoke(for clutch - tata1515/55 bs-iv) , ball pin (adjuster type) bs3/4/6 (for clutch- tata 1618/62 , 1515/55 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bs-vi) , set screw (for clutch- tata1515/55 bs-iv) , locking wire (for clutch- tata 1618/62 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bd-vi) , spring collar bracket (for front spring- tata 1512/55 bs-iii and 1515/55 bs-iv) , bracket , front spring hanger fr-lh and rr-rh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , bracket , front spring hanger fr- rh and rr-lh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , assy. fuel tank cap complete (for tata ultra 7.5t mini bus bs-iii and bs-iv) , center bearing bracket 192 mm pitch (for transmission- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket , front frd (rubber bush) (for front /rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy rear shackle with rubber bush (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , threaded bush (rubber bush) (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for rubber bush) bs-3/4/6 (rear suspension for tata ultra 7.5t mini bus bsiii and bs iv) , spring pin (for rubber bush) (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. rubber bush (svil-dia 22)(for rear suspension for tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. radiator cap (for tata 1515/55 bs-iv) , ball pin fixed pivot (for clutch booster ley. vk2011.4tgr and tf2012.otgr bs-vi/obd-ii bs-vi) , bracket-front spring wev front - front lh (front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring weveller rh(front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear rh (for front spring le vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear lh vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , cb bracket spl55 (for propeller shaft ley. mini ls1508.7t6r bs-vi) , cap. fuel tank (hcv) (for diesel tank cap- eicher 3008 mini bus bs-iii and bs-iv) , pin (for rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , pin sup.(for front suspension- eicher 3008 mini bus bs-iii and bs-iv) , bush , suspension mcv (for fr and rr suspension- eicher 3008 mini bus bs-iii and bs-iv) , shackle assy , spring (for front/rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , spherical bush dia-10 (for gear shift lever- eicher 3008 mini bus bs-iii and bs-iv) , center bearing bracket (for transmission- eicher 3008 mini bus bs-iv bus bs-iii and bs-iv)

Central Government/Public Sector

CTN :39628934

21 Apr, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of stopper top for center pivot block for wag-7 loco as per rdso drg no. sk.vl-128 alt-6 (ref. no.5) or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39788977

21 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For supply of cast steel bolster with integrated 14'' center pivot bottom for lwlh25 bogie. as per drawing no.wd-13012-s/05(sheet 1of 2)alt-04 spec [ wa rranty period: 30 months after the date of delivery ]

Bellow Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector