Latest bench grinding machine Tenders | Government bench grinding machine Tenders

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

CTN :39841689

16 Apr, 2025 NA

Mettur - Tamil Nadu

Tender For supply of grinding table segments for zgm 133g-ii model pulverized coal mill -3sets

Central Government/Public Sector

CTN :39842021

01 Apr, 2025 NA

Porbandar - Gujarat

Tender For various repair works on electrical systems - various defects on electrical equipment., l-1386 : 02 in nos cctv camera not working in pcr and amr. suspect both cameras defective. cameras to be repaired and proven for satisfactory operation. job involves laying of new lan cable approx length 90 mtrs from dchq to pcr and amr, connecting cameras with dvr., l-1387: ice cube maker not working view following defects: -(a) water inlet valve deteriorated and not allowing water to pass inside machine.(b) water pump defective.(c) compressor gas pressure showing low. gas to be refilled as required.ice cube machine to be removed from position and shifted to workshop for repair and refitment to be carried out post refitting. defect to be rectified and proven for satisfactory operation., l-1388: senior sailor water cooler not cooling water and not working. suspect compressor showing low freon gas. gas to be refilled to required pressure. defect to be rectified and proven for satisfactory operation., l-1389: mast base ventilation fan not working and showing low insulation. mast base ventilation fan (10 kw, 3 ph, 50hz) to be rewinded and proven for satisfactory operation., l-1390 : engineering workshop bench grinding machine not working view motor overheating and showing low insulation. bench grinding machine motor (5kw, 3 ph, 50 hz) to be rewinded and proven for satisfactory operation., l-1391: ahu 1 not working view control circuit malfunction. suspect olr and 02 relay malfunctioning. defect to be rectified and proven for satisfactory operation., l-1392: ibs acos (auto change over switch) not working. suspect contactor/relay malfunctioning. defect to be rectified and proven for satisfactory operation.

corporations/Associations/Others

CTN :39842178

16 Apr, 2025 NA

Mettur - Tamil Nadu

Tender For grinding table segments for zgm 133g ii model pulverized coal mills 1 set consists of 12 segments 3 sets

CTN :39803180

02 Apr, 2025 10.41 Lacs

Multi City - Karnataka

Tender For material supply for construction of womens self-help group sanjivini building at kattemalavadi village in hunsur tq under mnrega scheme-, add sundries charges at 1% on labour, , over head & other miscellaneous charges, , add sundries charges at 1% on material, , broken stone aggregate 40 mm size, , broken stone aggregate 20 mm size, , broken stone aggregate 12 mm to 10 mm size, , coarse sand (zone iii), , portland cement, , mixer (concrete) - 1 cum capacity, , add watering charges at 1% on material, , plasticizer / super plasticizer, , hom of vibrator 0.71 days, , granite metal 20 mm, , broken granite metal 10 mm, , mason class i (with tools), , concrete mixer 0.4/0.28 cum capacity, , add formwork and staging @ 20% for height upto 5 m, , add formwork @ 4% out of material and labour, , tmt bars fe 500, , binding wire, , size stone 20 x 20 x 25 cms, , bond stone 20 x 20 x 45 cm, , boulders, , mixer (concrete small used in culvert), , mason class ii (with tools), , stone chistler class ii, , add watering charges at 1% on labour, , brick, , casurina poles 100 - 150 mm, , add handling, loading and unloading at 1% on material, , add sundries charges at 2% on material, , add providing and removing scaffolding at 3% on labour, , vitrified tiles 600x600 mm, , ceramic tiles of size 30 x 30 cms, , white cement, , glazed tiles 300x450, , border tiles 30 x 10 cms, , add handling, loading and unloading at 2% on material, , add white cement for pointing at 2% on material, , broken granite metal 20 mm, , ms sheet 1 mm thick, , gusset plates 3.15 mm thick, , angle iron 40x40x6mm, , pintels including welded pins, , ms cleats with bolts and nuts to rest on pile, , hooks, , fitter class |, , add hom of welding and grinding machine @ 2% on material, , locking arrangements at 1% on a, , ready mix primer paint (ready mix red lead paint), , add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, , painter class i, , mathi/nandi wood planks for panels 25 mm, , thick, , add cutting and other wastage 5%, , hom of machinaries for planing, , honne wood, , honnewood planks for panels 20 mm thick, , unit cost as per the specification, , powder coated 60-70 micron, , nylon rollers, , rubber beading for shutters beading, , pvc beading, , alluminium tower bolt - 20 cm, , alluminium handles - 15 mm, , cleat angles, , chrominum plated screws, , 5.50 mm thick plain glass, , fabricator, , m.s rods, , ms flat, , welder grade i, , add hom of welding and grinding machine @, , 4% on material, , enamel metal paint, , add brush at 1% on cost of paint, , 50 mm dia ms hollow pipe b class 14 gauge, , 20 mm x20mm vertical m.s square rod, , 12x12 m.s square rod, , anticorrosive bitumastic paint, , mechanic class ii/mechanic hmp grade i/eme grade, , hom of welding and grinding machine, , hom of cutting and grinding machine1, , tools and plants @2% on material, , transportation loading and unloading @1% on material, , dry distemper, , whitening, , add brush, putty, glue at 5% on cost of paint, , water proofing cement paint, , add brush, putty, sand paper at 2% on cost of paint, , enamel primer, , add brush, putty, sand paper at 5% on cost of paint, , enamel paint, , add brush, putty, sand paper, roller at 5% on cost of paint, , aluminium paint, , polyenthylene water storage tank of specified capacity l, , labour charges for lifting and placing in position and making connection at 7% on material, , handling loading and unloading 3% on material, , foreman grade 1, , granite metal 40 mm, , table moulded bricks of class designation 50( non modular), , c.i manhole cover with frame, , cost of centering at 1% on material, , pvc pipe of 6kg\cum,90 mm, , stone aggregate(single size):20 mm nominal size, , stone aggregate(single size): 10 mm nominal, , size, , polyethylene pipes high density 32 mm dia external dia, , add, , plumber, , add cement sand and grit 1% on material, , transportation charges of materials beyond 5 km @ 10%, , cost of 6.5mm m.s. coil, , fabr

CTN :39808275

14 Apr, 2025 47.3 Thousand

Faridabad - Haryana

Tender For fabricating and supplying of furniture at dr. dinesh mahajan and dr. santosh mathapati lab at 2nd floor, thsti ncr bsc faridabad - providing and fixing 350 mm deep over-head storage of required size, on top of the computer table, one side openable, cabinet made of 18mm thick bwp board of approved make on top, bottom, sides, partitions, and 12mm thick bwp ply of approved make at shelves (middle of cabinets) as per drawing. 1.0mm thick laminate of approved make on exposed sides of cabinets wherever required and 0.8mm thick laminates shall be fixed on all unexposed inner faces of cabinets including wooden/pvc lipping, suitable locking arrangement all type of screw, fasteners for hanging, hinges/piano hinges, wooden screw, adhesive, polishing /painting of lipping, magnetic catchers, door handles/knobs, fixing charges and all other type of necessary fittings etc. complete as per design drawings and site condition as directed by engineer in-chargesize of storage: 7 11"x2 8 x1 2", providing, fabrication and fixing in position equipment table of below mentioned following size made of 19 mm thick bwp board on top & bottom, supporting frame shall be made of thick 38mmx38mmx3.2 mm heavy duty ms square pipe fabricated as per design with height adjuster. not less than 18 mm thick polished z-black granite stone of adequate size shall be fixed on top and bottom with suitable adhesives including edge grinding / chamfering & polishing , screws and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the engineer-in-charge.description : size 18 x 18"x 26", providing and fixing over-head storage of required size, fixed on the ms angle 50x50x5mm screwed on the wall with fastener, one side openable, cabinet made of 18mm thick bwp board of approved make on top, bottom, sides, partitions, and 12mm thick bwp ply of approved make at shelves (middle of cabinets) as per drawing. 1.0mm thick laminate of approved make on exposed sides of cabinets wherever required and 0.8mm thick laminates shall be fixed on all unexposed inner faces of cabinets including wooden/pvc lipping, suitable locking arrangement all type of screw, fasteners for hanging, hinges/piano hinges, wooden screw, adhesive, polishing /painting of lipping, magnetic catchers, door handles/knobs, fixing charges and all other type of necessary fittings etc. complete as per design drawings and site condition as directed by engineer in-chargesize of storage: 40"x40 x24", modification of existing equipment table including cutting the ms table with wooden shelf and granite in order to achieve the required sizes and jointing the same with other end including granite chamfering, fixing, wooden shelf repairing, ms structure welding, grinding the joints and painting with synthetic enamel paint all complete as per the direction of engineer in charge.

CTN :38924589

04 Apr, 2025 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin welder tradeat iti rajkot, gujarat, indiapackage 2: welder trade - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester

CTN :38924590

04 Apr, 2025 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin welder tradeat iti bhilad, gujarat, indiapackage 2: welder trade - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester

State Government

CTN :39391232

26 Mar, 2025 4.65 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of grinding rolls ( roller liners) and bull ring segments ( table liners) in high chrome metallurgy for mvm 32f coal mills installed at ph-ii ( 2 x 660 mw) sstpp mppgcl dongalia

Central Government/Public Sector

CTN :39758528

30 Jun, 2025 NA

Duliajan - Assam

Tender For expression of interest for item- crome casing pipes , chrome tubing pipes , drill pipes , heavy weight drill pipe , drill collars and lifting plug , drilling stabilizers , drilling/ workover handling tools --- elevators, tongs, , slips etc. , potassium formate , solid control equipment --- mud cleaner/ degasser/ , centrifuge/ linear motion shale shaker , sucker rod pump (srp) and its accessories , srp insert pump , ethyl mercaptan , low shear velocity fluids/polymers , emd chemical dosing pump, reciprocating pump , hsp 20/40, isp 20/40, isp 30/50 mesh , pig tracker/transmitter , pipeline locator , logging cables , tri cone roller drilling bits of various sizes , 11"od standard reverse circulating junk basket & 7.7/8" od reverse circulating junk basket , pdc drill bits of various sizes , fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole , impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing , pneumatic spinner , 5.1/ 2" premium threaded casing (grade: n80 & grade p110) , cased hole logging units with tools and accessories along with installation, commissioning and training , wireline mast unit, including training and installation& commissioning , oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and hardware accessories , ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories , oil well explosives: explosives for baker pressure setting tools: power charge, primary ignitor & secondary ignitor , procurement of oil well explosives used in exploration and production of hydrocarbon , 27.1/2" (698.50 mm) rotary table , 7.1/16" x 10 m double ram bop with accessories , 13.5/8" x 10 m single ram bop with accessories , 3.1/16" x 10 m flexible steel hoses for choke manifold , 3.1/8" x 5 m flexible steel hoses for choke manifold , 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose , 3.1/8" x 5m flexible steel hoses , thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning , hose vibrator , rotary hose, drilling in assorted length , 2.34 mm (0.092") piano wireline (well measuring line) , static gel strength analyzer , electronic reservoir pressure and temperature measuring gauge. , automatic distillation apparatus , ft ir spectrophotometer , rheometer , 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton) , digital acoustic liquid level measuring cum dynamometer equipment (echometer) , cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length , geological thin section preparation unit comprising of cutting, vacuum impregnation, grinding and polishing equipment and consumables. , polarised microscope , pony drill collar , premium tubing , 37.1/2 rotary table , air gas permeameter , double block and bleed isolation plug , gas chromatograph , low to moderate temperature cement retarder , high temperature fluid loss control cement additive , xcd-polymer , xc-polymer (premium) , poly anionic cellulose-regular , poly anionic cellulose-super lo , junk sub 5.1/2 inch & 7 inch , 13.5/8-inch x 10000 psi annular bop , 13.5/8-inch x 10000 psi double ram bop. , ct reels , super fishing jar , drilling jar , overshots , slammer logging cables , 3 left hand kelly , multi element analyzer , high performance ep lube , mercury free pvt system , surface memory gauge , accessories of logging cable , downhole pressure temperature gauge , real time kinematic differential global positioning system , flow assurance software , seismic survey designing and modelling software , low to moderate temperature fluid loss control cement additive , high temperature cement retarder , cement friction reducer , isotope ratio mass spectrometer , fishing tool 6.75 od, axial vibrational, shock absorbing tool , 8 od, axial vibrational, shock absorbing tool , tubing stripper , nano-graphene based lubricant , tubing retrievab

Bench Grinding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector