Latest bill counter Tenders | Government bill counter Tenders

State Government

CTN :39826602

02 Apr, 2025 20.07 Lacs

Chamba - Himachal Pradesh

Tender For providing and laying tile work plinth protection work,wood work,painting and polishing work and other work

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39843320

07 Apr, 2025 3.90 Lacs

Aluva - Kerala

Tender For this estimate is for the repair works to taluk office,n paravur the estimate includes false ceiling work double scafolding system supplying anjily wood wrought and put up supplying anjily wood reapers dismantling mp tiles supplying m p tile etc

CTN :39403457

29 Mar, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras renovation and refurbishment of oic office and staff office and conference hall - rubber wood panelling work with melamine pu polishing including rubber wood bidding , re furbishing and re polishing of conference table size 4ft x 16ft x 30 inch , fixing of new vertical blinds , refurbishment and re polishing of wooden doors changing of door closer , fixing of wooden flooring , refurbishing of officer succession board , re furbishing of book cabinet , refurbishment and re polishing of main table and side table , refurbishment and re polishing of wooden doors , repairing and re polishing of computer table , dy oic cabin renovation and re polishing of main table and computer table , re furbishing of sofa 5 seated , repairing and re polishing melamine pu of wooden doors

CTN :39832798

09 Apr, 2025 6.13 Lacs

Multi City - Karnataka

Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - labour charges for handing errection of rcc rings etc. at 5%(kall), transportation charges of materials beyond 5 km at 10%(kall), fabrication charges.(kall), cost of 6.5mm m.s. coil(kall), bib cock 20mm nominal bore(kall), polythylene pipes high density 32mm external dia(kall), add 5% for fittings and wastage charges(kall), add cement sand and grit 1% on material(kall), pvc pipe of 4kg/cum,75 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 10kg/cum,110 mm(kall), handling loading and unloading 3% on material(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), polyenthylene water storage tank of specified capacity l(kall), licenced plumber with tools(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), c.i. / m.s. brackets for flushing cistern(kall), brass stop cock(kall), cp brass waste 32 mm of standard pattern(kall), cp brass chain with plug(kall), copper plated brass piller tap 15mm(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), s or p trap 100mm(kall), indian type water closet of size 580 mm of specified make with footrests(kall), add white cement for pointing at 2% on material(kall), border tiles 30 x 10 cms(kall), glazed tiles 300x450(kall), white cement(kall), ceramic tiles 30 x 30 cms(kall), vitrified tiles 600x600 mm(kall), add brush, putty, sand paper at 3% on cost of paint(kall), enamel paint(kall), mason class ii (with tools)(kall), add brush, putty, sand paper at 2% on cost of paint(kall), water proofing cement paint(kall), add brush, putty at 5% on cost of distemper primer(kall), distemper primer(kall), add brush, putty, glue at 5% on cost of paint(kall), whitening(kall), dry distemper(kall), lime(kall), add providing and removing scaffolding at 3% on labour(kall), painter class i(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), ready mix primer paint (ready mix red lead paint)(kall), add(kall), welder grade i(kall), fitter class i(kall), z section(kall), reeded glass 2 mm thick(kall), tw beading for fixing glass(kall), stays(kall), hinges 5inch heavy duty(kall), handles(kall), ms clamps(kall), mullion section(kall), t section(kall), honnewood planks for panels 20 mm thick(kall), honne wood(kall), unit cost as per the specification(kall), hom of machinaries for planing(kall), add cutting and other wastage 5%(kall), mathi/nandi wood planks for panels 25 mm thick(kall), binding wire(kall), tmt bars fe 500(kall), casurina poles 75 - 100 mm dia(kall), mason class i (with tools)(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), add handling , loading and unloading at 1% on material(kall), burnt bricks class 35 (non modular)(kall), add watering charges at 1 % on labour(kall), add handling , loading and unloading at 2% on material(kall), casurina poles 100 - 150 mm(kall), silver oak or equivalent planks 38 mm thick(kall), jungle wood runners and planks(kall), mixer (concrete small used in culvert)(kall), boulders(kall), bond stone 20 x 20 x 45 cm(kall), size stone 20 x 20 x 25 cms(kall), hom of vibrator 0.71 days(kall), plasticizer / super plasticizer(kall), formwork, centering & scaffolding for columns & piers(kall), add watering charges at 1 % on material(kall), mixer (concrete) - 1 cum capacity(kall), portland cement(kall), coarse sand (zone iii)(kall), broken stone aggregate 12 mm to 10 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 40 mm size(kall)

CTN :39817434

02 Apr, 2025 5.10 Lacs

Raichur - Karnataka

Tender For construction of shg work at yergera villege,yergera gp,tq dist raichur - cost of 65mm ms coil shgyergera2174, bib cock 20mm nominal bore shgyergera2174, polythylene pipes high density 32mm external dia shgyergera2174, pvc pipe of 4kg cum 75 mm shgyergera2174, pvc pipe of 6kg cum 63 mm shgyergera2174, pvc pipe of 10kg cum 110 mm shgyergera2174, polyenthylene water storage tank of specified capacity l shgyergera2174, brass stop cock shgyergera2174, cp brass waste 32 mm of standard pattern shgyergera2174, copper plated brass piller tap 15mm shgyergera2174, white vitreous china clay flat back wash basin size 550x400mm shgyergera2174, indian type water closet of size 580 mm of specified make with footrests shgyergera2174, border tiles 30 x 10 cms shgyergera2174, glazed tiles 300x450 shgyergera2174, ceramic tiles 30 x 30 cms shgyergera2174, vitrified tiles 600x600 mm shgyergera2174, water proofing cement paint shgyergera2174, distemper primer shgyergera2174, whitening shgyergera2174, dry distemper shgyergera2174, lime shgyergera2174, z section shgyergera2174, reeded glass 2 mm thick shgyergera2174, tw beading for fixing glass shgyergera2174, hinges 5 inch heavy duty shgyergera2174, handles shgyergera2174, ms clamps shgyergera2174, mullion section shgyergera2174, t section shgyergera2174, honnewood planks for panels 20 mm thick shgyergera2174, honne wood shgyergera2174, unit cost as per the specification shgyergera2174, mathi nandi wood planks for panels 25 mm thick shgyergera2174, binding wire shgyergera2174, tmt bars fe 500 shgyergera2174, casurina poles 75 to 100 mm dia shgyergera2174, solid concrete block 40x15x20 cms 5 nsqmm shgyergera2174, burnt bricks class 35 non modular shgyergera2174, casurina poles 100 150 mm shgyergera2174, silver oak or equivalent planks 38 mm thick shgyergera2174, jungle wood runners and planks shgyergera2174, boulders shgyergera2174, bond stone 20 x 20 x 45 cm shgyergera2174, size stone 20 x 20 x 25 cms shgyergera2174, plasticizer super plasticizer shgyergera2174, portland cement shgyergera2174, coarse sand zone iii shgyergera2174, broken stone aggregate 12 mm to 10 mm size shgyergera2174, broken stone aggregate 20 mm size shgyergera2174, broken stone aggregate 40 mm size shgyergera2174

CTN :39541010

17 Apr, 2025 16.75 Lacs

Multi City - Karnataka

Tender For corrigendum : inviting tender for construction of anaganavadi building work at nagalapura village - cib dbpgpang, centering dbpgpang, watering dbpgpang, concrete mixer dbpgpang, tile layer (glazed mosaic tiles etc.) dbpgpang, carpernter class -ii dbpgpang, carpenter class i dbpgpang, painter dbpgpang, bar bender dbpgpang, semi skilled dbpgpang, mason dbpgpang, wash basin dbpgpang, white vitreous china wash basin size 630x450 with fitting dbpgpang, ceiling fan dbpgpang, fluorescent bulbs dbpgpang, mcb dbpgpang, switch/socket dbpgpang, wiring dbpgpang, metal fan box dbpgpang, junction box 25mm dbpgpang, pvc conduit pipe 25mm dia dbpgpang, distemper dbpgpang, wall putty dbpgpang, m.s. grills dbpgpang, nandi wood dbpgpang, electronic trivector meter dbpgpang, tank dbpgpang, pvc pipe dbpgpang, acrylic smooth exterior dbpgpang, rcc perforated rings dbpgpang, superior glass dbpgpang, kitchen sink dbpgpang, upvc windows dbpgpang, granite slabs 40 mm thick dbpgpang, ceramic glazed wall tile dbpgpang, ceramic glazed tiles 300,300 mm dbpgpang, vitrified tiles 60x60 cm dbpgpang, white vitreous china water dbpgpang, door frame dbpgpang, honne wood dbpgpang, pvc door frame dbpgpang, m s square rods dbpgpang, bricks dbpgpang, binding wire dbpgpang, tmt steel dbpgpang, solid concrete blocks(400,100,100) dbpgpang, solid concrete blocks(400,200,200) dbpgpang, bond stonnee dbpgpang, size stonnee dbpgpang, jelly 10mm dbpgpang, jelly 20mm dbpgpang, jelly 40mm dbpgpang, sand dbpgpang, cement dbpgpang

CTN :39812987

02 Apr, 2025 30.00 Lacs

Pali - Rajasthan

Tender For furniture items and installation-two seater table with bench:two seater desk cum bench.overall size: h-760 w-950 x l-1050 (mm) age group: 15 & abovematerial description:-desk, seat & back of 18mm thick. pre-laminated board (plb) with 2mm pvc beading all over edge.frame vertical pillar of 1.2 mm (18swg) thick. crc sheet is 513book shelf & modesty panel of 0.8mm (22swg) thick. crc sheet is 513.frame base tube of 50x25x1.21mm (18swg) thick. erw rectangular tube (crc)all support tube of 25x25x1.21mm (18swg) thick. erw square tube (crc).seat & back frame tube of 25x1.21mm (18swg) thick. erw round tube (crc)good quality pvc shoes & bufferatbottom.all steel parts of powder coated with standard quality powder after 10 tanks anti-rust treatmentlectureroompodium:wooden podiumasper drg.no. jnt-007-274-00-270919 (without microphone& speaker) overall size: w-600 x d-600 x h-1200 (mm)classroom white boardsize:6x4feetiron bed:single bed for hostels & barrack.overall size:l2030xw827xh695ml80"xw32.5"xh27.4"inchmaterial specifications:the raw material used will be prime quality crca asper is 513 (1994,1998) 'd'grade.frame structure made up of prime quality crc(m.s.) rectangular tube 25x50x1.2mm (18 swg.)body made up of prime quality 0.8mm (22swg.)vendors should have calibrated testing equipment through nabl lab and copy of the sameshouldbeenclosedalongwiththetender.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and b grade phosphating (in house) & same will be demonstrated to the purchaser during pre- dispatch inspection.iron stoolfixed square stool with ms square frame with ss top (304grade)overall size (approx.): h-515xw-420xd-420(mm)material description:ms top 1.2mm thick. (18swg) crca sheet is 513grade.stool frame structure of 25x25x1.2mm (18swg.) erw squarepipe crc sheetis513.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and bgradephosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch inspection.notice boardsize:4x3ftvisitor bench3 seats perforated (chromium plated) cluster chair on beam with handle.overall size(approx): l-73xd-28xh-30.5(inch)material description:integrated seat & back with arm & backrest.all frame work made up of chrome plated.seat & back will be perforated type.base will be htypeframe.bench will be properly welded and well finished.frame work will be made up of good quality material.computer tablecomputer table with pullout tray for keyboard, 3drawer unit, knee perforated panel & full shelf. overall size: w-120xd-60xh-75(cm) [48"x24"]material description:maintop & bottom shelf of 18mm thick. wood based high quality pre-laminated particle board (plb) of tesa with 2mm pvc edge band by hot melt glue process forbeading all over edge.table top c frame& key board trey of 0.9mm (20 swg) thick. crca sheet is513.leg tube, leg tube support & footrest of 25x25x1.2mm thick. (18swg) erw square ms tube.3 drawer unit of 22swg (0.8mm) & 23swg (0.7mm) thick.crca sheet is513.good quality camlocking & pvc handle.perforated modesty panel of 0.7mm (23swg) thick. crca sheet is 513.good quality telescopic channel (ebco) for key board trey.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment andb gradephosphating (inhouse) & same will be demonstrated to the purchaser during pre-dispatch inspection.class room tableoffice table with single drawer& half modesty panel, erw square pipe frame.table with top size of: w-120xd-59(cm) [48"x24"]material specification:table top: should be used best quality top of 19 mm thick plb of tesa with isi marking from branded manufacturer. 4 sides of the top will be banded with hi

CTN :39824127

23 Apr, 2025 NA

Satna - Madhya Pradesh

Tender For invitation of rates equipment/tools - invitation of rates equipment/tools, abc fire extinguisher 12 kg (map 50), abc fire extinguisher 1kg (map 50), abc fire extinguisher refilling (map 50) refilling, abc fire extinguisher 2kg (map 50), abc fire extinguisher 4kg (map 50), abc fire extinguisher 6kg (map 50), abc fire extinguisher 9kg (map 50), adjustable wrenches 27no., adjustable wrenches all type (upto 27 no.), air blower (620w, 16000 rpm, air flow 3.5 cum/min, anti vibration) (heavy duty), allen key set, angle cutter (heavy duty) (11000 rpm), axe large (heavy duty), b.a. set refilling, battery charger machine (12/24v, upto 10 amp, 70 ah to 220 ah) portable (heavy duty), multi bank charger, battery operated grease gun 480w 10,000 psi, bolt cutter 350 mm, bolt cutter 600 mm long(heavy duty), bolt cutter 900 mm long(heavy duty), breaker (1000 blow/minute, 2000w.), canvas gloves with anti skid palm (heavy duty), cap hydrant spindle (heavy duty), car stopper/speed breaker, chheni 1 kg steel (heavy duty), chheni 1.5 kg steel (heavy duty), clamp (0.5 ,0.75,1,1.25, 1.5,1.75, 2,2.25, 2.5, 2.75, 3,3.25, 3.5, 3.75 , 4 inch) complete set, claw hammer 1.5 lb (ss), co2 fire extinguisher refilling, co2 fire extinguisher 1kg, co2 fire extinguisher 2kg, co2 fire extinguisher 4kg, co2 fire extinguisher 6kg, co2 fire extinguisher 9kg, combi tools hydraulic (spreading force 23 ton, cutting force 43 ton), combined key for hydrant cover and lower valve, crow bar 6 ft. (heavy duty), crow bar of 6 ft long 25mm dia, cutter stone (heavy duty), delivery hose 63mm dia confirming to (type a 15 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type a 30 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 15mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 30mtr length) with ss metal and female coupling, digging bar(heavy duty) 5kg, double side box end wrench ss (12-13, 14-15, 16-17, 23-26, 24-27) complete set, drill machine electric 500watt 2600rpm with all type of drill bits set, electric chain saw machine (heavy duty) 16 inch bar,800w, electric circular saw 1400 watt, electric tool kit (megnetic bit holder, long nose plier, vu inch adapter pller 1x4, socket wrench, cutter hammer, wood drill bits x5, masonry drills bitsx5, wrenchsx7, allen keysx8, hix bitsx10 ), fire beater ms 5kg, fire blanket 5mtrx5mtx4mm (heavy duty) asbestos, 900 degree c, fire cylinder painting work, fire fighter cap (heavy duty), fire fighter winter jacket (heavy duty), fire fighter uniform (suit), fire fighting safety shose/boots (heavy duty), fire net (3m x 10m) (heavy duty), fire safety helmet with tourch facility(heavy duty), fire vehicle ladder 24 feet (aluminium), fire vehicle ladder 30 feet (aluminium), fireman axe (heavy duty), first aid box, floodlight led work light 18 v, foam branch-fb5x type with pick up tube, gm, foam tubes (length 14 inch), foam tubes (length 16 inch), fog nozzle 63 mm, gunmetal, folding ladder aluminium 15 feet (heavy duty), full face mask, g clamp 100mm, goggle- (heavy duty), grinding stone 4 inch,metal (heavy duty), hacksaw 390mm x 23mm x 150mm (heavy duty), hammer - 10 kg, hammer 1 kg (ss), hammer 2 kg (ss), hammer 3 kg (ss), hammer- 5kg, hand controlled branchpipe gm 63mm, hand cross saw 18 inch steel (heavy duty), high expansion foam branch pipe 63mm gm, high expansion foam compound, high velocity nozzle 63 mm gunmetal, hook ceiling (preventor) with 3 mtr long wooden handle(heavy duty), hose bandages, hose box (for storing two nos 7.5m or 15m hoses and one nozzle), hose rack asssembly, hose reel 19mm heavy duty (30 m), hose reel drum ms, hose reel nozzles bronze inch, hydraulic bolt cutter electric 950 w cutting diameter 20mm, hydraulic grease gun with all nozzle set 9gm/stroke, 10 kg, heavy duty,4000 psi, hydraulic rebar cutter (14 ton)(manual), impact wrench tyre nut opener,4200 rpm(with nozzle of 27no.30no.32no.), jack hydraul

Central Government/Public Sector

CTN :39816405

16 Apr, 2025 11.54 Lacs

East Singhbhum - Jharkhand

Tender For construction of pcc road at dudra village under csr - supply of clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. all kinds of soil. , excavating supplying and filling of local earth including royalty by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches plinth sides of foundation etc. complete. , construction of granular sub base by providing close graded material conforming to specifications mixing in a mechanical mix plant at omc carriage of mixed material by tippers to work site for all leads and lifts spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per specifications and directions of engineer in charge. with material conforming to grade ii size range 53 mm to 0.075 mm having cbr value 25 , providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand , 12 mm cement plaster of mix 1 isto 6 1 cement 6 fine sand , neat cement punning

Bill Counter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector