Latest bimetallic sheet Tenders | Government bimetallic sheet Tenders

State Government

CTN :39204002

18 Feb, 2025 9.96 Lacs

Bengaluru - Karnataka

Tender For re-placing of deteriorated ac sheet shelter by precoated galvanized iron profile sheets for switchgear platform and other allied works at 220/66/11 kv sub-station hsr layout, bengaluru.

CTN :39149038

07 Feb, 2025 1.80 Crore

Palakkad - Kerala

Tender For mgnregs material supply - 100 mm channel shoulder 2.5 m long, 100 mm s.c.i. trap with vent heel, 15 mm c.p.brass tap, 200 mm aluminium aldrop, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), amla(nelli) seeds, aryaveppu seeds, badam seeds, beam clamp 300-380 mm (450-1070 mm), bitumen washer, bitumen washer, bone meal(bone manure or ellupodi), brass bib-cock-15 mm dia, c.i. bracket for wash basin and sinks, c.p. brass waste 32 mm, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, chempakam seeds, chromium plated brass screws 25 mm, coarse sand (zone iii), column clamp 450x1070 mm, corner angle 45x45x5 mm 1.50 m long, corner angle 45x45x5 mm 2.50 long, cowdung, deharadun white lime, double clip (bridge clip), drumstick seeds, fine sand (zone iv), flats up to 10 mm in thickness, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), g.i pipes 50 mm dia, g.i. plain washer thick, galvanised steel j or l hooks 8 mm dia, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, green net 75% shade, guava (pera ) seeds, hard board 6 mm thick, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, interlocking c.c. paver block (60 mm thick, m-30), kudampuli seeds, m.s. tube 40 mm dia, mild steel round bar 12 mm dia and below, mild steel tubes hot finished welded type, neemcake(veppin pinnakku), njaval seeds, plastic emulsion paint, polyethylene water storage tank with cover and suitable locking arrangemnet, polyurethene bags, portland cement, precoated aluminium trafford sheet 0.450mm thick, precoated galvanised steel plain ridges, precoated glavanished iron profile sheet 0.50 mm tct, prop 2 m (2-3.5m), pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 20 mm outer dia 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, quarry waste, rawl plug 50 mm (designation 10 nos), rectangular shape 453x357 mm mirror with plastic moulded frame, red oxide zinc chromate primer, royalty for good earth, second class kail wood in scantling, single clip, solid blocks of size 30x20x15cm, solid blocks of size 30x20x20cm, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, stone aggregate(single size): 06 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, synthetic enamel paint in black or chocolate shade, through and bond stone size 24 x 24 x 39cm, twisted steel/deformed bars, vibrator (needle type 40 mm), vitreous china flat back wash basin 630x450 mm, vitreous china orrisa type w.c. pan size 580 mm, vitrified floor tile 60x60 cm, wall form panel 1250x450xmm, wall form panel 1250x500 mm, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, welding by electric plant, wire nails, 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), bright finished or black enameled mild steel screws 20 mm, bright finished or black enameled mild steel screws 40 mm, diesel oil, g.i. pipes 25 mm dia, g.i. pipes 40 mm dia, gi trafford profile sheet 0.35 mm thick, gutter pipe, hire charge of 10hp engine and pump set, mangalore ridge tile 20mm thick, mangalore tile 20mm thick, material - 75 mm valve, material-75 mm mta, mild steel round bar for reinforcement, muringa saplings, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, pvc 45 degree elbow 110 mm dia, pvc 45 degree elbow 63 mm dia, pvc 45 degree elbow

CTN :39149282

10 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For mgnregs material supply 2024-2025 - stone aggregate(single size) 40 mm nominal size, stone aggregate (single size) 10 mm nominal size, stone aggregate(single size) 20 mm nominal size, coarse sand (zone iii), portland cement, fine sand (zone iv), quarry waste, royalty for good earth, stone for masonry work, average rate of mild steel round bars for reinforcements - carriage of steel 1.05/10 = 0.105t/ twisted steel/deformed bars, twisted steel/deformed bars, galvanised steel corrugated sheets, mangalore tiles 20 mm thcik, mangalore ridge tiles 20 mm thick, precoated galvanised steel plain ridges, mild steel round bar above 12 mm dia, interlocking c.c. paver block (80 mm thick, m-30) - bedding layer - 50mm thick , black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality 300 x 300 mm in all shades designs except white, ivory, fume red brown etc., solid blocks of size 30x20x15cm, stone aggregate(single size): 06 mm nominal size, pvc pipe 15 mm outer dia. 12kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 20 mm outer dia 10 kfg/cm2 - (adding 15% for fittings wastage), pvc pipe 25 mm outer dia . 12 kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 25 mm outer dia. 10kgf cm2 - (adding 15% for fittings and wastage), pvc pipe 32 mm outer dia. 10kgf/cm2 - add 15% for fittings and wastage etc, pvc pipe 32 mm outer dia 6kgf/cm2 - add 15% fitting and wastage etc on (a), pvc pipe 40 mm outer dia. 10kgf/cm2 - add 15% for fitting and wastage etc on (a), pvc pipe 50 mm outer dia.6kgf/cm2 - (15% added for fittings and wastage etc), pvc pipe 15 mm outer dia. 12kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 20 mm outer dia 12 kgf/cm2 - (adding 30% for fittings wastage), pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc elbow 63 mm dia, pvc bend 63 mm dia, pvc elbow 75 mm dia, pvc tee 63x63x63 mm dia, pvc end cap 63 mm dia, pvc socket/coupling 63 mm dia, pvc reducer 63x50 mm dia, pvc door elbow 63 mm dia, pvc door tee 63 x63x63mm dia, pvc vent cowl 63 mm dia, empty cement bag - (country twine,stitching charge and needle), welding by electric plant - for cutting assembling & eretion, mild steel tubes hot finished welded type, galvinised wire mesh of average width of aperture 1:4 and nominal dia. of wire 0.63 mm, wire nails, pvc corrugated roofing sheets, pvc plain roofing sheets, 200 mm aluminium aldrop, iron hooks & eyes 100 mm, common burnt clay f.p.s. (non modular) bricks class designation 7.50, modular common burnt clay bricks of class designation 7.50, vitrified floor tile 60x60 cm, vitrified floor tile 50x50 cm, mild steel tubes hot finished welded type, galvanised steel corrugated sheets, precoated aluminium trafford sheet 0.45 mm thick, gi trafford profile sheet 0.35mm thick, gi chicken mesh ( 24 guage 12.5x12.5mm), precoated galvanised iron profile sheet 0.50 mm tct, green net 75% shade, twisted steel/deformed bars, g.i. plain washer thick, bitumen washer, galvanised steel j or l hooks 8 mm dia, citizen information board( public), citizen information board( private), sundries, binding wire, boots, hand gloves, finger gloves, hammer, pots, tarpaulin, chatti, mammaty, showel, lever, kotta, pick axe, mild steel round bar above 12 mm dia, centering & shuttering , vibrator (needle type 40mm), hire charges of concrete mixer 0.25 to 0.40 mm with hopper, green hose, pump set, g i sheet, wheel barrow, plastic drum, hire charge of 5 hp engine and pump set - materials, hire charge of 10 hp engin

CTN :39150425

12 Feb, 2025 1.33 Crore

Palakkad - Kerala

Tender For mahatma gandhi nregs- supply of materials to various work sites in sholayoor grama panchayat 2024-2025 - 0983 : fine sand (zone iv), 0982: course sand (zone iii), 0295: stone aggregate (single size): 20mm nominal size, 0293: stone aggregate (single size): 40mm nominal size, 0297: stone aggregate (single size):10mm nominal size, 0367: portland cement, 1.008: stone for masonry work, 1005: twisted steel bar, 7319: wall form panel, mr94: quarry waste, 0002: hire charge of concrete mixer, 0012: vibrator, mr186: precoated aluminium trafford sheet 0.45 mm, 0298: stone aggregate (single size):10mm nominal size, 1208: bitumen washer, 1209: g.i plain washer thick, 1219: wire nails, mr113: galvanised wire mesh, 4009: mild steel tubes hot finished welded type, 1215: welding by electric plant, 4202: red oxide zinc chromate primer, 0833: synthetic enamel paint in black or chocolate shade, 2406: float glass sheet of nominal thick 4mm, mr4: solid block of size 30x20x15cm, 0775 : deharadun white lime, 808: water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, 0815: dry distemper, 1154: stone for size 24x24x39cm, 0595 : bright finished or black enameled mild steel butt hinges 100 x 58x1.90mm, 0597 : bright finished or black enameled mild steel butt hinges 50 x 37 x1.50mm, 0640 : bright finished or black enameled mild steel screws-20 mm, 7800: ceramic glassed tiles first quality minimum thickness 5mm in all colours and designs, 7801: ceramic glassed tiles first quality 300 x300 mm in all colours and designs, 7103 : stainless steel kitchen sink without drain board 470 x 420mm boul depth 178mm, 1309 : ci braket for wash basin and sink, 1547 : gi pipe 25mm dia, 1885 : 15mm cp brass tap, mr80 : pvc bend 110mm dia, mr10 : anjili woods scantls, mr54 : pvc pipe 110mm outer dia 6kgf/cm2, pvc elbow 110mm dia

State Government

CTN :39124208

07 Feb, 2025 1.92 Lacs

Ashoknagar - Madhya Pradesh

Tender For providing and fixing of precoated galvanized iron profile sheet at rajghat hps chanderi

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :39078521

06 Feb, 2025 35.46 Lacs

Malappuram - Kerala

Tender For supply of materials - stone aggregate(single size):40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size):10 mm nominal size, quarry waste, coarse sand (zone lll), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wallform panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip, mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, wire nails, galvanized wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63mm, 200 mm aluminium aldrop, epoxy paint, gi plain washer thick, bitumen washer, galvanized steel j or l hook 8 mm dia, precoated galvanized iron profile sheet 0.050mm clt, paving block - inter lock 80mm thick m -30, fine sand, single clip, m.s tube 40 mm dia

State Government

CTN :39074298

06 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement , collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5 , hire charges wall form panel 1250x500 mm , hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip , hire charges m.s.tube 40mm dia , supply of twisted steel / deformed tmt bars fe-500d , supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a , supply of bitumen solution primer of approved quality , supply of dehradun white lime , supply of welding by electric plant , supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer , supply of galvanised steel j or l hooks 8mm dia , supply of precoated galvanised iron profile sheet 0.5mm tct , supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists , supply of iron pintels including welded pin , supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer , supply of c.i.pile shoe , supply of m.s.clamps for pile shoe , hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete. , hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete. , hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete. , hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete. , hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et , production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete. , supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :39059972

07 Feb, 2025 16.88 Lacs

Mumbai - Maharashtra

Tender For repairs to external plaster, polymer, painting of left side and precoated sheet roof on terrace at new polytechnic building at e.t.h., mumbai.

Bimetallic Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government