Latest blow pipe Tenders | Government blow pipe Tenders

State Government

CTN :39222191

15 Mar, 2025 5.02 Lacs

Kangra - Himachal Pradesh

Tender For bid to ras supply of welding electrode 315x350mm 6013 , welding electrode 315x450mm 6013 , welding electrode 2.5x350mm 6013 , gland grease packing 8mm , gland grease packing 10mm , gland grease packing 12.5mm , gland grease packing 15mm , water rubber hard hose pipe , rubber star cupling 45hp , weld star combined welding cutting blow pipe , welding copper cable 95 sqmm is 9857 , compressed leather 6mm , hts hex head nut and bolt , ss studs with double nuts , m seal plumber , emery paper 100 grade patta norton beer , lead wool , pig lead , welding electrode 315x450mm 7018 , white stiff paint safaida , rubber insertion sheet 3mm , d joint clamp200mm with rubber seal , d joint clamp150mm with rubber seal , d joint clamp100mm with rubber seal , d joint clamp75mm with rubber seal , leakage waterproof tape , brass brazing electrode , ci welding electrode 315x350mm , fire bricks bid number/ & ( * ) : gem/2025/b/5913778 dated/ + : 05-02-2025 bid document/ 1 1 1 / 35

State Government

CTN :39467850

17 Mar, 2025 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of oxygen gas regulators (version 2) (q2) , acetylene pressure regulator as per is 6901 (q3) , blow pipe for welding and cutting as per is 7653 (v2) (q3) , rubber welding hoses as per is 447 (q3)

State Government

CTN :39339094

19 Mar, 2025 61.87 Lacs

Delhi - Delhi

Tender For corrigendum : supply of split air conditioner including green ac, wall mount type (v2),drain pipe for air conditioners (accessories),extra refrigerant pipe for air conditioners (accessories),extra electrical cable for air conditioners (accessories),automatic line voltage correctors (step type) for domestic use - is - 8448

Central Government And Public Sector

CTN :39664463

02 Apr, 2025 NA

Bengaluru - Karnataka

Tender For supply of type-a cutting nozzle for gas cutting blow pipe use for acetylene as the f uel gas to size 1/16".make:- esab/l&t messer/ ador/ hmp/ victor only. special conditions f or the purchase of cutting nozzle 1) only oem / authorised dealers of oem should supp ly 2) vendors are required to quote only for the brands they are approved for the off er shall be supported by authorization certificate from the manfacturers. ]

CTN :39663427

07 Apr, 2025 NA

Multi City - Multi State

Tender For supply of two piece nozzle (nozzle mixing type) size: 1/16" for lpg cutting blow pipe, isi marked, suitable for cutting up to 25 mm thick ms plate.%a0 matl.& specn : is: 7653 / 1975, (reaff. 2019). [ w arranty period: 30 months after the date of delivery ]

CTN :39516273

15 Mar, 2025 1.68 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : supply of gas cutting nozzles (q3) , blow pipe for welding and cutting as per is 7653 (v2) (q3) , acetylene pressure regulator as per is 6901 (q3) , oxygen gas regulators (version 2) (q2) , rubber welding hoses as per is 447 (q3) , electrode holder as per is 2641 (q3) , dark glass for welder's screen (q3) , welding apron (q3) , welding helmet as per is 5983 (q3) , welding cable (v2) as per is 9857 (q2)

Central Government/Public Sector

CTN :39643279

31 Mar, 2025 NA

Haridwar - Uttarakhand

Tender For expression of interest against procurement of heating blow pipe

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government And Public Sector

CTN :39622709

18 Mar, 2025 48.00 Lacs

Vrindavan - Uttar Pradesh

Tender For asset management services - asset to be valued; onsite-supply of equipments:- variable refrigerant flow system, outdoor unit(s) - heating & cooling, 8hp outdoor unit, , indoor unit, ductable type units, ductable type unit 5.5 tr, , split units , split units 2.0tr, , , refrigerant joint(s), indoor refnet joints , controllers, central remote control, twining kit, pcb safety plate controller, installation of airconditioning system of following items--lifting, shifting, installation, testing and commissioning of outdoor units equiped with highly efficient varaiable speed scrool compressors in each outdoor unit with noise level not exceeding 70db(a), etc. with nitrogen reprocessing, vacumising, charging and top-up of r410 a gas as per requirement at site. (r410a gas make-dupont/honeywell) , lifting shifting & installation of outdoor units - 8hp , tesing & commissioning charges - 16hp , vacuum, nitrogen reprocessing & r410a- refrigerent topup -16hp , lifting, shifting, installation, testing and commissioning of indoor units with outer cabinet equiped with pre air-filters, multispeed inverter motor, dx coil section, drain pain,electronic expansion valves, pipe connections, pcbs etc. (fastener make- hilti) , , , indoor unit(s), ductable type units, ductable type units, ductable type unit 5.5 tr, , "supply, installation, testing and commissioning of refrigerant piping, tees, sockets, expanders and reducers as per requirement at site complete with supports, threaded rods, channel, tie, fasteners etc. interconnecting the outdoor condensing units and indoor evaporating units. (make-mandev/mexflow), nitrile rubber tubular insulation (make-supreme/superlon/armaflex/a-flex/k-flex/equivalent)" , "supply, installation, testing and commissioning of 2 core x 1.5 sq.mm copper conductor shielded data cable as per requirement at site complete with supports, threaded rods, channel, tie, fastners etc. for control between indoor and outdoor unit & for communication between indoor unit & remote controllers in suitable pvc conduict , (make- polycab/havells)" , , supply, installation, testing and commissioning of pvc condensate drain piping of 10kg/sq.cm. (142.23 psi) with 6 mm thick closed cell elastomeric nitrile rubber tubular insulation up to the nearest drain point along with necessary fittings.(make- prince/supreme/finolex/polycon/equivalent) , supply, installation, testing and commissioning of hot dipped 20 gauge g.i. perforated trays for exposed refrigerant pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. , , supply, installation, testing and commissioning of un-insulated square/ rectangular sheet metal ducts as per requirement at site complete with threaded rods, channel, tie, fastners, brackets/slotted "c" channel for supply air ducting as per the approved shop drawings jindal, sail, tata. , , supply, installation, testing and commissioning of closed cell crossed linked polymers xlpe insulation , , supply, installation, testing and commissioning of acoustic lining with 10 mm elostomeric sinusoidal surface acoustical insualtion. , , supply, installation, testing and commissioning of extruded aluminum powder coated supply air grills/difusers with dampers and return air grills/diffusers without dampers. , supply/return air grills/diffusers with volume control dampers , supply, installation, testing and commissioning of nrv , , supply & installation charges of accessories fire retardent canvas connection & filters as required for duct type indoor units. , ms-stand for odu unit , ms-jaal , civil work chase cutting for copper/drain pipe , civil work rcc corecut/chase cutting for copper/drain pipe , annexure-iii-electrical installation and accessories-panel for 16hp odu , design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following lt panels fabricated out of 18 guage crca sheet steel in cubical formationwith reinforecment of suitab

CTN :39613176

28 Mar, 2025 NA

Mathura - Uttar Pradesh

Tender For supply of split air conditioner including green ac, wall mount type (v2) (q2) , wall mounted 5 kva stabilizer , sheet metal enclosure qith a two pin and earth plug and socket complete with one single pole mcb 32 amp , cable single core 4 sqmm , interconnecting refrigerant copper pipe or tube work eith elastomeric nitrule rubber , ac stand heavy duty for air conditioner outdoor unit

Blow Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector