Latest bogie centre pivot Tenders | Government bogie centre pivot Tenders

Central Government/Public Sector

CTN :38568891

20 Dec, 2024 NA

Kota - Rajasthan

Tender For supply of stiffener plate for btpn wagons as per rdso drg. no wd-08097-s-01, alt-2 or late st, item no. 3 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :38570070

23 Dec, 2024 NA

Dibrugarh - Assam

Tender For supply of stiffener plate part of front support plate for balance draft gear as per rdso drawing no-r dso/cg/drg/24034 (with hardware items ht hex head bolt m16x45, hexagonal castle nut m 16 & split pi n 4x40) and confirming to rdso specification as per drawing no-rdso/cg/drg/24034 and rdso/2011/cg -03 (rev.03) or latest. (to be procured from rdso source for cbc). [ warranty period: 84 months after t he date of delivery ]

Central Government/Public Sector

CTN :38570137

18 Dec, 2024 NA

Thiruvananthapuram - Kerala

Tender For supply of stiffener plate of front carrier plate for aar-h type cbc with bdg for lhb & icf type coaches to rdso drg. no. rds o/cg/ drg/24034, alt. nil, matl. spec.: is 3885, pt.ii, gr.-v [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604572

20 Jan, 2025 NA

Samastipur - Bihar

Tender For supply of bogie centre pivot bottom for boxn hl wagon to rdso drg. no. wd-97049-s-03, item n o. 01 ,alt -10.wd-21-casnub-22 nlb bogie- 93 rev.2, wd-21-casnub-22nlb bogie-rev.2_amend.6, w d-17-casnub-22hs bogie-92-rev.4, [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38604681

31 Dec, 2024 NA

Gooty - Andhra Pradesh

Tender For supply of bogie centre pivot top (flat type ) for casnub 22 hs bogies conforming to r dso spec. no. wd17-casnub -22 hs bogie -92 rev.4 of sep-2024. to rdso drg no : wd-97049-s -03, item - 2, alt : 10. [ warranty period: 72 months after the date of delivery ]

CTN :38588833

04 Jan, 2025 NA

Chamoli - Uttarakhand

Tender For supply of gi wire mesh,spiral rings,joining pins,joining hook,gi stiffener,geo textile material,ismb is 226,srt hot rolled carbon steel sheets,3d digital printed net,tarpolin 15 x 15,wire mesh jallie,sand bag pack of 500,tools and miscellaneous stores

Central Government And Public Sector

CTN :38487025

23 Dec, 2024 NA

Dibrugarh - Assam

Tender For corrigendum : supply of stiffener plate part of front support

Central Government/Public Sector

CTN :38362510

18 Dec, 2024 NA

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of stiffener plate of front carrier plate for aar-h type cbc with bdg for lhb & icf type coaches to rdso drg. no. rds o/cg/ drg/24034, alt. nil, matl. spec.: is 3885, pt.ii, gr.-v [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

Central Government/Public Sector

CTN :38538467

20 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of bogie centre pivot top.

Bogie Centre Pivot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors