Latest boundary pillar Tenders | Government boundary pillar Tenders

State Government

CTN :39436074

27 Feb, 2025 10.05 Lacs

Reasi - Jammu And Kashmir

Tender For erection of 149 nos. of demarcation boundary pillars as per approved design at different locations as per tashree burjiat (description of boundary pillar) and in dakikote forest compt. 19/th thakrakote range of reasi forest division under campa 2

State Government

CTN :39434195

28 Feb, 2025 5.09 Lacs

Chikhali - Maharashtra

Tender For construction of concrete boundary pillar beat ghatbori 1 and ghabori 2 in ghatbori range

State Government

CTN :39387236

26 Feb, 2025 9.83 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39387237

26 Feb, 2025 11.28 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :39307274

27 Feb, 2025 NA

Shahjahanpur - Uttar Pradesh

Tender For erection of boundary pillars for demarcation of identified surplus land at ocfs

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

CTN :39388473

10 Mar, 2025 NA

Multi City - Multi State

Tender For invitation of quotation for supply of constructional stores - fibre reinforced concrete elements., galvanised steel post with element lock - to interconnect the concrete blocks., high performance galvanised steel wire netting., galvanised steel wire rope of 16mm dia., spiral type brake elements at the end post to absorb impact energy.

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required