Latest braking contact Tenders | Government braking contact Tenders

Central Government/Public Sector

CTN :39841905

16 Apr, 2025 NA

Bangalore - Karnataka

Tender For fabrication of a planetary ball milling machine (two grinding stations) with control rpm and time

State Government

CTN :39855514

11 Apr, 2025 NA

Jamshedpur - Jharkhand

Tender For supply of 1000 kn automatic compressing testing machine (ctm) for quality control lab.

corporations/Associations/Others

CTN :39859094

28 Apr, 2025 24.00 Lacs

Raigarh - Chhattisgarh

Tender For supply of sanitary napkins incinetator machine with smoke control unit (q3)

Central Government/Public Sector

CTN :39842021

01 Apr, 2025 NA

Porbandar - Gujarat

Tender For various repair works on electrical systems - various defects on electrical equipment., l-1386 : 02 in nos cctv camera not working in pcr and amr. suspect both cameras defective. cameras to be repaired and proven for satisfactory operation. job involves laying of new lan cable approx length 90 mtrs from dchq to pcr and amr, connecting cameras with dvr., l-1387: ice cube maker not working view following defects: -(a) water inlet valve deteriorated and not allowing water to pass inside machine.(b) water pump defective.(c) compressor gas pressure showing low. gas to be refilled as required.ice cube machine to be removed from position and shifted to workshop for repair and refitment to be carried out post refitting. defect to be rectified and proven for satisfactory operation., l-1388: senior sailor water cooler not cooling water and not working. suspect compressor showing low freon gas. gas to be refilled to required pressure. defect to be rectified and proven for satisfactory operation., l-1389: mast base ventilation fan not working and showing low insulation. mast base ventilation fan (10 kw, 3 ph, 50hz) to be rewinded and proven for satisfactory operation., l-1390 : engineering workshop bench grinding machine not working view motor overheating and showing low insulation. bench grinding machine motor (5kw, 3 ph, 50 hz) to be rewinded and proven for satisfactory operation., l-1391: ahu 1 not working view control circuit malfunction. suspect olr and 02 relay malfunctioning. defect to be rectified and proven for satisfactory operation., l-1392: ibs acos (auto change over switch) not working. suspect contactor/relay malfunctioning. defect to be rectified and proven for satisfactory operation.

CTN :39130794

29 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For bid to ras bid to ras corrigendum : supply of bullet camera 5mp , dome camera 5mp , server rack 42u , workstation for display , server with license pack , network attached storage device , video management software , layer 2 access switch , cat 6 patch panel , cat 6 patch cord , cat 6 cable , workstation for biometric and rf machine , access control bio metric machine with software including all accessories , radio frequency identification workflow rfid card

CTN :39858980

18 Apr, 2025 NA

Korba - Chhattisgarh

Tender For supply of sanitary napkins incinetator machine with smoke control unit (q3)

CTN :39859325

07 Apr, 2025 NA

Vaishali - Bihar

Tender For supply of sanitary napkins vending machines (q3) , sanitary napkins incinetator machine with smoke control unit (q3)

CTN :39847468

07 Apr, 2025 NA

Samastipur - Bihar

Tender For supply of sanitary napkins vending machines (q3) , sanitary napkins incinetator machine with smoke control unit (q3)

CTN :39846723

19 Apr, 2025 60.00 Lacs

Coimbatore - Tamil Nadu

Tender For supply of pulp molding machine , air compressor , mould set , piping valve wiring and pneumatics , control panel , spare set

CTN :39720952

29 Mar, 2025 15.00 Lacs

Kapasan - Rajasthan

Tender For corrigendum : work of road furniture as per requirement in municipal area kapasan. (annual contract) - providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 3 metre long and size 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., 60 cm equilateral triangle, 80 mm x 60 mm rectangular, 60 cm x 45 cm rectangular, providing and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick framed to angle iron 40x40x5mm with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., providing and erecting direction and place identification retro- reflectorised sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting 2 mm thick framed to angle iron 40x40x5mm with area exceeding 0.9 sqm supported on two nos mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., supplying and fixing glow studs of size 100 x 20 mm made of heavy duty body shall be moulded asa (acrylic styrene acrylortrite) of abs having electronically welded micro prismatic lens with abrasion resistant coating as approved by engineer- in-charge. the glow stud shall support a load of 13635 kg. tested in accordance with astm d4280. the slope of retro-reflective surface shall be 35+/ -5 degree to base. the panels on both sides with at least 12 cm of reflective areas up each side. the luminance intensity should be as per the specification and shall be tested as described in astm 1: 809 as recommended in bs : 873 part 4 : 1973 as per approved sample & manufactures by the engineer-in-charge., providing and fixing l type bollard 135cm height made out of 1.25mm thick m.s. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of 150x150x7mm thick plate and hold fast at bottom, whole body is painted in white stove enamel and red reflective 3 band, each of 7.5cm and one reflective sheet of 15cm dia provided to it complete in all respect including all material, labour, diversion., providing and fixing swiss type hazard marker made out of 2mm thick m.s. sheet size of box is 15x15cm with hold fast at bottom whole body is painted in white stoving enamel paint with white/ high intensity grade prismatic type sheeting on all four side complete in all respect including all material, labour, and diversion., solar raised pavement markerssupply & installation of solar raised pavement markers made of polycarbonate molded body with circular shape, solar powered, led self illumination in active m

Braking Contact Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector