Latest brass foil Tenders | Government brass foil Tenders

State Government

CTN :39614772

12 Mar, 2025 34.70 Lacs

Latehar - Jharkhand

Tender For supplying of spares part for india mark-ii deep well hand pump under d wand s div latehar for the year 2024-25 - spare parts of deep well hand pump india mark-ii., hexagonal bolt m12 x 1.75 x 40 mm long, hexagonal ( high tensile) bolt 10mm, nyloc nut m10x1.5, handle axle(stationless steel), chain with coupling, handle assembly (gi), water tank assembly (gi), lower valve assembly im ii, upper valve assembly im ii, rubber seat retainer im ii, reducer cap for cylinder im ii, nitrile sealing ring im ii, hexagonal rod coupling, pump head assembly (gi) with front cover bolt & third plate, nitrile rubber clinder sealing big for lower valve for im ii, nitrile rubber clinder sealing small ring for upper valve im ii, nitrile rubber cup washer for im ii & iii, ball bearing 6204z, cylinder assembly complete set for im ii cylinder, cylinder body with brass liner for im ii with reducer cap for top & bottam, upper valve guide, b.s connecting rod, spacer, add 5% gst.

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

CTN :39578202

17 Mar, 2025 10.00 Lacs

Tirunelveli - Tamil Nadu

Tender For 2025-2026 annual tender in sivagiri town panchayat - gi pipe (1/2") mtr, gi pipe (3/4") mtr, gi pipe (1") mtr, gi pipe (1 1/4") mtr, gi pipe (1 1/2") mtr, gi pipe (2") mtr, gi pipe (2 1/2") mtr, gi pipe (3") mtr, gi pipe (4") mtr, gi pipe (5") mtr, gi pipe (6") mtr, 1/2" gi union, 3/4" gi union, 1" gi union, 1 1/4" gi union, 1 1/2" gi union, 2" gi union, gi elbow (1/2"), gi elbow (3/4"), gi elbow (1"), gi elbow (1 1/4"), gi elbow (1 1/2"), gi elbow (2"), gi elbow (2 1/2"), gi elbow (3"), gi elbow (4"), gi elbow (5"), gi elbow (6"), gi bend (1/2"), gi bend (3/4"), gi bend (1"), gi bend (1 1/4"), gi bend (1 1/2"), gi bend (2"), gi bend (2 1/2"), gi bend (3"), gi bend (4"), gi bend (5"), gi bend (6"), gi tee (1/2"), gi tee (3/4"), gi tee (1"), gi tee (1 1/4"), gi tee (1 1/2"), gi tee (2"), gi tee (2 1/2"), gi tee (3"), gi tee (4"), gi tee (5"), gi tee (6"), gi coupling (1/2"), gi coupling (3/4"), gi coupling (1"), gi coupling (1 1/4"), gi coupling (1 1/2"), gi coupling (2"), gi coupling (2 1/2"), gi coupling (3"), gi coupling (4"), gi coupling (5"), gi coupling (6"), gi reducer (1/2"), gi reducer (3/4"), gi reducer (1"), gi reducer (1 1/4"), gi reducer (1 1/2"), gi reducer (2"), gi reducer (2 1/2"), gi reducer (3"), gi reducer (4"), gi reducer (5"), gi reducer (6"), 2" gi cork, 3" gi cork, 4" gi cork, 1/2" gi hex nipple, 3/4" gi hex nipple, 1" gi hex nipple, 1 1/4" gi hex nipple, 1 1/2" gi hex nipple, 2" gi hex nipple, 2 1/2" gi hex nipple, 3" gi hex nipple, 3/4" 3/4 feet gi pipe nipple, 3/4" 1 feet pipe nipple, 3/4" 2 feet pipe nipple, 3/4" 2 1/2 feet pipe nipple, 3/4" 3 feet pipe nipple, 1 1/2" 1 feet gi pipe nipple, 1 1/2" 2 feet gi pipe nipple, 2" 1 feet gi pipe nipple, 2" 2 feet gi pipe nipple, 2" 1/2feet gi pipe nipple, 3" 1 feet gi pipe nipple, 3" 2 1/2 feet gi pipe nipple, 4" 3feet gi pipe nipple, 3/4" gi end cap, pvc pipe 1/2" (mtr), pvc pipe 3/4" (mtr), pvc pipe 1" (mtr), pvc pipe 1 1/4" (mtr), pvc pipe 1 1/2" (mtr), pvc pipe 2" (mtr), pvc pipe 63mm (mtr), pvc pipe 75mm (mtr), pvc pipe 90mm (mtr), pvc pipe 110mm (mtr), pvc pipe 140mm (mtr), pvc pipe 160mm (mtr), pvc coupler 1/2", pvc coupler 3/4", pvc coupler 1", pvc coupler 1 1/4", pvc coupler 1 1/2", pvc coupler 2", pvc coupler (63mm), pvc coupler (75mm), pvc coupler (90mm), pvc coupler (110mm), pvc coupler (140mm), pvc coupler (160mm), pvc elbow 1/2", pvc elbow 3/4", pvc elbow 1", pvc elbow 1 1/4", pvc elbow 1 1/2", pvc elbow 2", pvc elbow (63mm), pvc elbow (75mm), pvc elbow (90mm), pvc elbow (110mm), pvc elbow (140mm), pvc elbow (160mm), pvc bend 1/2", pvc bend 3/4", pvc bend 1", pvc bend 1 1/4", pvc bend 1 1/2", pvc bend 2", pvc bend (63mm), pvc bend (75mm), pvc bend (90mm), pvc bend (110mm), pvc bend (140mm), pvc bend (160mm), pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 1 1/4", pvc end cap 1 1/2", pvc end cap 2", pvc end cap (63mm), pvc end cap (75mm), pvc end cap (90mm), pvc end cap (110mm), pvc end cap (140mm), pvc end cap (160mm), pvc tee 1/2", pvc tee 3/4", pvc tee 1", pvc tee 1 1/4", pvc tee 1 1/2", pvc tee 2", pvc tee (63mm), pvc tee (75mm), pvc tee (90mm), pvc tee (110mm), pvc tee (140mm), pvc tee (160mm), pvc mta 1/2", pvc mta 2", pvc mta (63mm), pvc mta (75mm), pvc mta (90mm), pvc mta (110mm), pvc mta (140mm), pvc mta (160mm), pvc fta (50mm), pvc fta (63mm), pvc fta (75mm), pvc fta (90mm), pvc fta (110mm), pvc fta (140mm), pvc fta (160mm), 2" pvc saddle piece 2" x 3/4", 2 1/2" pvc saddle piece, 3" pvc saddle piece 3" x 3/4", 4" pvc saddle piece 4" x 3/4", 5" pvc saddle piece 5" x 3/4 ", 6" pvc saddle piece 6 " x 3/4 ", isi sluice value (2"), isi sluice value (2 1/2"), isi sluice value (3"), isi sluice value (4"), isi sluice value (5"), isi sluice value (6"), isi sluice value (8"), isi sluice value (10"), 3/4" gate value, 1" gate value, 1 1/2" brass gate value, 2" brass gate value, 3" brass gate value, 4" brass gate value, 3" brass non return value, 4" brass non return value, 14" pipe range, pipe chain range, cutting player, haxsa blade

CTN :39573832

26 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , gum spirit of turpentine oil as per is 533 (q3) , tyre nylon grip 28 x 1 and half inch , tube 28 x 1 and half inch , tyre nylon grip 26 x 1 and half inch , tube 26 x 1 and half inch , chain cover , screw mud guard long 1 inch , carrier clamp , chain bicycle , brake shoe complete , m g stay clip , chain wheel , seat clip , break u bolt , seat nut with bolt , stand spring , cotter pin , valve tube , ball 5 by 32 , ball 1 by 4 , pedal lh , pedal rh , spokes with nipple , crank plain , ball head race set of three , free wheel , reflector , cover saddle pvc , bb spindle with cup , chain adjuster , chain stay bolt , spindle hub rear , spindle hub front , hub cone , brake clip l and r , hub cup , handle grip , brake u rear , brake u front , solution tube , cutting plier , screw driver long 300 mm double side , open spanner 8x9 inch , open spanner 10x11 inch , ring spanner 12x13 inch , ring spanner 14x15 inch , pipe wrench 450mm , pedal spanner , parrot plier , free wheel die , hammer 300 gm , nipple key , scissor brass handle 300mm , rime bend wrench , tasla steel , compressor nozel , compressor pipe , paint brush 2 inch bid number/ & ( * ) : gem/2025/b/5964713 dated/ + : 05-03-2025 bid document/ 2 2 1 / 48

CTN :39581288

20 Mar, 2025 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

State Government

CTN :39565265

10 Mar, 2025 14.72 Lacs

Dhanbad - Jharkhand

Tender For supply of spare parts of deep well hand pumps india mark-ii conforming to is:9301-1190 with latest amendment (may be read along with 1st amendment is:15500(part 1-7) 2004 with latest amendment for spares common to both india mark-ii & iii respectively) under d.w.&s division, no-1, dhanbad for the year 2024-25. - hexagonal bolts m12 - 1.75 x 40 mm long, hexagonal nut m12-1.75 mm, high tensile bolts m10-1.50 x 40 mm, nyloc nuts m10-1.5mm, handle axle(stainless steel), chain with coupling, haexagonal rod coupling m12 -1.75 x 50 mm long, connecting rod 3 mtr. long with coupling and nut (electro galvinised), pump head assembly with front cover bolt & third plate, handle assembly (g.i.), 32 mm seamless pipe socket, upper valve assembly im-ii complete set, lower valve assembly im-ii complete set, ci reducer cap for im-ii, cylinder body with brass liner for im-ii with reducer cap top & bottom, water tank assembly i.m.-ii, ci cylinder complete set for im-ii, rubber sealing big, rubber sealing small, nitrile rubber cup(washer), gst-5%

State Government

CTN :39565271

10 Mar, 2025 44.10 Lacs

East Singhbhum - Jharkhand

Tender For supply of spare parts of deep well hand pump india mar ii conforming to is 9301 1990 with latest amendment may be read along with 1st amendment is 15500 part-1 to 8 2024 with latest amendment for spares of india mark iii respectively - supplying of spare parts of drilled tube wells for india mark-ii conforming to is 15500 (relevant part 1 to 8)/2004 (with latest amendment) only from approved manufactures/suppliers from bis/unicef after proper varification of offer sheet, inspection certificate, marking & packing etc. as per bis/uniceff standard norms etc. all complete., hexagonal bolt m12x1.75 x 40mm long common to mark-ii & iii, hexagonal nut m12 x 1.75, high tensiele bolt m 10 x 1.50 x 40 mm long, nylock nut m10 x 1.50, handle axle (ss), ball bearing 6204z, chain with coupling, nitrile rubber cup washer for im-ii & iii, n. rubber sealing ring big for lower valve mark-ii, n. rubber sealing ring small for lower valve mark-ii, handle assembly (g.i), water tank assembly-ii, cylinder assemble complete set for mark-ii, upper valve assembly complete set for india mark-ii, lower valve assembly complete set for india mark-ii, upper valve guide (g.m), cylinder body with brass liner for im-ii with reducer cap for top & bottom, pump head assembly gi with front cover, bolt & third plate, 32mm gi socket, nr sealing ring im ii, connecting rod 3 mtr long with coupling and nut electro-galvanized, reducer cap for cylinder assembly im ii, check valve guide im ii gm, check valve seat im ii gm, gun metal spacer, hexagonal rod coupling m12x1.75x50mm long, gst 5%

State Government

CTN :39565242

11 Mar, 2025 37.00 Lacs

Hazaribag - Jharkhand

Tender For supply of spare parts of deep well hand pump india mark ii conforming to i.s 9301-1990 with latest amendment 2004 with latest amendment for spares of india mark ii respectively under d w and s division hazaribag for the year 2024-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12 x 1.75 x 40 mm long, chain with coupling, handle assembly (gi), water tank assembly (gi), pump head assembly (gi) with front cover bolt & third plate, reducer cap for cylinder im ii, handle axle(stationless steel), nitrile rubber cup washer for im ii & iii, cylinder assembly complete set for im ii cylinder, upper valve assembly complete set im ii, lower valve assembly complete set im ii, upper valve guide im ii, cylinder body with brass liner for im ii with reducer cap for top & bottom, connecting rod, ball bearing 6204z, plunger rod for im-ii, gst @ 5% (add sgst 2.5% + cgst 2.5%)

CTN :39566825

10 Mar, 2025 15.00 Lacs

Dholpur - Rajasthan

Tender For laboratory equipment supply - zoology, binoculars, general purpose revolutionary centrifuge (square/round):powerful motor, swing head and multistage speed regulator, capacity 8x15., stop watch racer 1/10 sec. with metal body., water treatment plant (deionizer) capacity 50 litres per hour. complete with manual., metzer microscope m 38 complete with 3 objectives (10x, 45x,), 1 eye pieces (10x), rack and pinion, diaphragm, plano-concave reflector, coarse and fine adjustment, stage with clips and vernier scale, haemometer or haemoglobinometer: (german) two non-fading standard tubes, one stirrer, one haemoglobin tube, pasteur pipette with rubber, dropper, vial with 1n hcl, hot air oven stainless steel chamber, 2 3 shelves, accuracy 1 c, 18 x 18 x 24 or digital model 14 x 14 x 14 . specify inner and outer chamber size while quoting. temperature controller., dissecting microscope metzer model m 33 or similar with all brass parts. 10 x, 20 x eye piece, sturdy base, complete in wooden box, systronics / symtronics or similar brand microprocessor based ph meter: lcd display showing mv. temperature, temperature compensation, auto buffer recognition along with accessories. data storage facility up to 90 samples and external printer attachment facility available., gel electrophoresis apparatus with digital power supply: paper model, sandon type, constructed of clear transparent imported perspex sheet. complete with power supply unit to gain absolutely steady and smooth dc supply variable 0 to 300 volts in 4 volts divisions and 0 50 mill ampere in 1 mill ampere division respectively., hot plate rectangular/ oval: robust body, enamel painted provided with three rotary switches and indicator lamp, as per isi specifications. deluxe type 18 x 24 / round with 8 diameter., ultra-thin ao spencer type microtome with all accessories ( 3 object holders, 1 knife 120 mm with back and handle, 1 large hone for honing, 1 leather strap for sharp edge honing) and operation manual, secchi disk 12 inches in diameter with bright b/w colours, big vue or similar75 inch interactive flat panel | android 14 smart digital board | 8 gb ram 256 gb rom | multitouch screen display for teaching, school, college, institute, classroom and office use, epson eb-e01 xga projector brightness: 3300lm with hdmi port (white), lamp life 12000 hrs (eco mode), digital zoom 1.35 x, insect spreading board (adjustable): size 14 x 5 adjustable groove with metallic fittings and cork sheet., insect killing jar: screwed bake lite cap, wide mouth jar charged with ethyl acetate., insect collecting net: deluxe quality with collapsible type ring, handle and shaft, made of aluminium tubing, standard size fine nylon or cotton net, handle 2 feet long folded becomes 20 inches., plankton net:conical bag of silk bolting cloth suspended by means of reinforcement to a metal ring. two glass vials to collect the plankots which can be fitted at the end of the bag, fitted with non-rusting metal chain 13 long and aluminium handle, ocular micrometer 10 mm divided in to 100 imported/ indian, stage micrometer (imported): 1 mm divided in to 100 (0.01 mm), micrometer eye piece, thin layer chromatographic kit: must include applicator specially designed to give dependable service in drawing thin uniform layer with one imported filter gauge, thin layer drawing board of perspex for 4 plates of special size, aluminium drawing rack to hold 3 plates, spotting guide of transparent perspex, developing chamber of rectangular jar with lid, anodized aluminium chamber, micropipettes of 0.1 ml, silica gel 250 gms, 5 glass plates square size of 20 cm, uniform thickness., uv insect trap: equipped with ultraviolet imported tube to collect night flying insects, insect suction trap: with long corning glass tube fitted with latex tube and brass gauge., digital microscope for students, wifi biological digital microscope with screen 7", wireless educational lab electron video microscope for science, usb & hdmi scope with camera.

Brass Foil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government