Latest brass tank Tenders | Government brass tank Tenders

Central Government/Public Sector

CTN :36241439

08 Jun, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : providing of custom bid for services - removal of sludge from pickling plant at sstp bhel trichy-pickling plant process sludge removal and disposal- 1. work permit shall be obtained from the concerned executive in-charge for carrying out the cleaning work before starting work. 2. phosphate bath will be handed over for cleaning after pumping solution to holding tank by cmp/sstp. as the sludge will tend to get dried and solidified, cleaning activities shall be commenced immediately after draining bath. 3. phosphate sludge present in the bath shall be thoroughly removed and collected in barrels / boxes without spillage on floor. contractor shall coordinate with maintenance dept. for fabricating boxes/barrels. 4. phosphate sludge filled barrels shall be moved to covered shed identified for storage with the help of vehicle and dumped on the floor. contractor shall bring vehicle for movement of barrels without spillage on floor. sludge removal/movement shall be completed on the same day itself as the chemical is to be stored in covered shed only. contractor has to ensure required manpower to complete the work as per schedule given by cmp/sstp. 5. contractor has to inform no. of barrels being moved to cmp/sstp for documentation purpose. 6. sedimentation pit will be handed over for cleaning after pumping water to recycling pit by cmp/sstp. as the sludge will tend to get dried and solidified, cleaning activities shall be commenced immediately after draining pit. 7. sedimentation sludge present in the pit shall be thoroughly removed and collected in tanks/boxes without spillage on floor. contractor shall coordinate with maintenance dept. for fabricating tanks/boxes. 8. sedimentation sludge filled tanks/boxes shall be moved to identified area/pits for storage with the help of vehicle and dumped into the pit. contractor shall bring vehicle for movement of tanks/boxes without spillage on floor. sludge removal/movement shall be completed on the same day itself as the chemical is to be stored in identified area only. contractor has to ensure required manpower to complete the work as per schedule given by cmp/sstp. 9. contractor has to inform no. of tanks/boxes being moved to cmp/sstp for documentation purpose. 10. the contractor shall provide all safety devices and personal protective equipment to their workmen at their own cost and shall ensure that their workmen wear such ppes (rubber gloves, leather gloves, respirator, apron & cum boot) while doing the work and there should not be any relaxation on this

Central Government/Public Sector

CTN :36011847

10 Jun, 2024 NA

Angul - Odisha

Tender For corrigendum : supply of lime dosing system for 2x660 mw ntpc talcher tpp stage iii - surge hopper , vibrating feeder , continuous discharge twin feed type bucket elevator with standard components as per item description. , lime silos - ms with ss 304 lining on conical portion- complete as per item description. , selfcleaning bag filter system of suitable capacity along with blowers, automatic- on-load cleaning system. , manual knife gates along with interconnecting flanges, hardwares and gaskets. , motorized knife gates along with accessories, interconnecting flanges, hardwares and gaskets. , rotary vane feeders- rotary air lock feeders - moc -stainless steelalong with motor- ie3 , interconnecting flanges, hardwares and gaskets. , screw conveyors complete as per item description , neutralisation tanks as per item description , agitators of ss construction with motor- reduction gear and its mounting , lime slurry dosing pumps alongwith motor - ie3- , process water piping from tp outside building to neutralisation tanks along with overflow and drain piping of tanks, back-flushing pipeline along with valves, fittings , lime slurry piping from neutralization tanks to dosing pumps inlet and from feeding or dosing pumps outlet to waste water tank inlet along with re-circulation line with all required valves, fittings , all interconnecting pipe or ducts, valves and all chutes instrument air, water line, slurry lines , instrument air piping from tp outside building upto equipment related to the system , supporting steel structure, platforms, ladders, railings, and holdback as applicable along with all accessories and necessary hardwares for complete lime feeding or dosing system. , complete instruments associated with equipment and integral piping as defined at 13-16 above for lime feeding or dosing system. , special tools and tackles or erection and start-up or commissioning spares , total lump sum prices for visits as per item description. , total lump sum prices for supervision of assembly, erection and commissioning, trial run at site and training to o and m staffs as per item description. , total lump sump price for successful conductance of performance guarantee test and handover as per the item description. , total lump sump price for training of employees of customer at manufacturers works - 3 persons for 2 days including lodging and boarding , low pressure piping-valves all sizes as per item description , agitators for neutralisation tank impeller assembly-1 lot is equal to 1 no of each type , agitators for neutralisation tank-bearing assembly- 1 lot is equal to 2 nos of each type , agitators for neutralisation tank-motor - 1 lot is equal to 1 no of each type and rating , agitators for neutralisation tank-belt and pulley if applicable- 1 lot is equal to 2 nos of each type , agitators for neutralisation tank- gear box assembly if applicable 1 lot is equal to 1 no of each type , slurry pumps- impeller assembly- 1 lot is equal to 1 no of each type , slurry pumps casing liners -1 lot is equal to 2 nos of each type , slurry pumps-seals-1 lot is equal to 3 sets of each type , slurry pumps-bearings-1 lot is equal to 2 nos of each type , slurry pumps-motor- 1 lot is equal to 1 no of each type and rating , slurry pumps-motor-pump coupling 1 lot is equal to 1 no of each type , measuring instruments-transmitters of all types, range and model no - 1 lot is equal to 10 percent of each type and model, which ever is more , process connection piping as per item description - valves of all types and models - 1 lot is equal to 20 nos. of each type and model. , process connection piping as per item description - 2 way, 3way, 5way valve manifolds - 1 lot is equal to 10 nos. of each type, class, size and model. , process connection piping as per item description - fittings - 1 lot is equal to 100 nos. of each type. , process connection piping as per item description - purge meters - 1 lot means 20 nos. of each type and model. , process connection

Central Government/Public Sector

CTN :36278949

17 Jun, 2024 NA

Warangal-T - Telangana

Tender For supply, installation, training and commissioning of process control lab equipments - four tank system ( vfts-01 ) , interacting trainer (conical tank system) [vit 05] , sperical tank system (vsts-01) , plc trainer kit

corporations/Associations/Others

CTN :36269689

06 Jun, 2024 1.17 Crore

Kolkata - West Bengal

Tender For procurement of spares of hydrogen generation plant,make-teledyne energy system, inc for mtps, dvc - insert assembly,koh pump shaft(ceramic spindle),part noes551a1400097-, 9, orifice on dryer,part, no.es-551b2400017-029, suction check, valve(for 2nd stage process, check valves),part, no.b16434-100, discharge check, valve(for 2nd stage process, check valves),part, no.b16434-100, coupling es-m14206-009, ,item id:sk03833,make-, m/s.teledyne energy, system,model-hm, filter elementesm14152-, 001;item, i.d:sk01650;make- m/, teledyne energy, system , model-hm, filter element, (koh),es-m14152-001,item, i.d: sk01653;make- m/, teledyne energy, system , model-hm, valve ,ball,onnoff,, 316 sst,38 od tube, es-002019,item i.d:, sk03844;make- m/, teledyne energy, system , model-hm, potasium hydroxide(koh), gas filter (6134-t6ff);, part no. es-002064, dryer refill kit ( 1 kit, required per dryer), fills 1 dryer: premeasured, bags if molesieve & deoxocatalyst;, part no. es-, 551a2400101-009, upper/lower diaphragm; part, no. b12358-029-23, upper/lower diaphragm; part, no. b12358-029-38, middle diaphragm; part no., b7192-081-88, middle diaphragm; part no., b7192-081-99, leak detection o-ring; part, no. 277-479, process o- ring; part no. 273-, 479, hydraulic o- ring; part no., 271-468, process o- ring; part no., 262-477, leak detection o-ring; part, no. 272-479, hydraulic o- ring; part no., 260-680, annulus plug o-ring; part no., 020-477, ball valve for mv1, for hydrogen, generator#2, model, no- hmxt-200, part noes-, 7076, feed water pump, assembly for, hydrogen, generator#2, model, no- hmxt-200 , part, no-es-xm20029-009, feed water pump for, hydrogen, generator#2, model, no- hmxt-200, part, no-es-104667, feed water filter, element for, hydrogen, generator#2, model, no- hmxt-200,part noes-, 2864, check valve for, hydrogen, generator#2, model, no- hmxt-200, part noes-, 1507, valve, 4-way, 1/2" fnpt,, for hydrogen, generator#2, model, no- hmxt-200, part noes-, 103071, cooling water valve, assembly(mv1) for, hydrogen, generator#2, model, no- hmxt-200, part noes-, xm21023-009, de-ox catalyst, material for, hydrogen, generator#2, model, no- hmxt-200, part noes-, 1017, de-ox catalyst tank, with material for, hydrogen, generator#2, model, no- hmxt-200, part noes, 551a1400080, impeller magnet, housing for hydrogen, generator#2, model, no- hmxt-200, part noes-, 551a1400132-001, gas filter for, hydrogen, generator#2, model, no- hmxt-200,part noes-, 2064, orifice for hydrogen, generator#2, model, no- hmxt-200, part noes-, xm20077-001, koh filter elemantmodified, for, hydrogen, generator#2, model, no- hmxt-200, part noes-, m14152-001, actuator valve, assembly for, hydrogen, generator#2, model, no- hmxt-200, part noes-, xm20063-009, heat exchanger for, hydrogen, generator#2, model, no- hmxt-200, part noes-, xm14040, koh pump assembly, for hydrogen, generator#2, part noes-, xm20030-009 model, no- hmxt-200,, koh pump repair kit, for hydrogen, generator#2, model, no- hmxt-200,part noes-, ts10311-009, koh pump insert, assembly for, hydrogen, generator#2, model, no- hmxt-200, plant,, part no-es-, 551a1400097-009, condenser for, hydrogen, generator#2 , model, no- hmxt-200, part noes-, xm14050, std impeller & magnet, assembly for, hydrogen, generator#2, model, no- hmxt-200, part noes-, 551a1400133-005, o-ring (ethylene, propylene ) for, hydrogen, generator#2, model, no- hmxt-200, part noes-, 100728, flexible hose for, hydrogen, generator#2, model, no- hmxt-200, part noes-, xm22053-001 -

Central Government / Public Sector

CTN :36168211

05 Jun, 2024 2.94 Crore

Jagatsinghapur - Odisha

Tender For corrigendum : providing of custom bid for services - providing services of engineering, preparation of estimates, technical specifications, preparation of drawing, bom etc. clarification at site during execution for engineering service department, paradip refinery, iocl.-work shall broadly consist of but not limited to the following: (i) party to carry out detail engineering & with compliance of moc (management of change) procedure of iocl for all process related schemes, development and infrastructure related jobs as per direction of eic (engineer-in-charge) (ii) deputed agency personnel must be experienced in carrying out detail engineering & be conversant with engineering software such as autocad, autodesk, autocad advance steel, pds/sp3d, pdms/e3d, caesar-ii and tank engineering software. (iii) carryout out site visit, identify and select appropriate location for new eqpt to be installed at site as per the process scheme complying with oisd norms, selecting appropriate routes for new piping including structural supports, platform, stair case, ladders, etc. taking all physical measurements at site, etc. as per direction of eic. (iv) referring to various engineering documents relevant to the process modification scheme available with iocl as per direction of eic. (v) preparation of detail engineering drawing with all details including bom (bill of material), complying all relevant codes and standards as per the process modification scheme, ensuring inclusion of comments of various depts as instructed & guided by eic. (vi) submission of engineering drawing with bom to eic within 15 days from the date of receipt of the process modification scheme or as per instruction of eic. (vii) incorporating changes in the engineering drawing as per site conditions as and when required during execution stage (execution is not in the scope of the vendor) as per direction of eic. (ix) preparation of as-built drawing, up-dation of existing ga drawing, etc., after completion of execution of the process scheme as per direction of eic. (x) minimum deployment of one (01) mechanical engineer, four (04) mechanical draftsmen