Latest bubble sheet Tenders | Government bubble sheet Tenders

Central Government/Public Sector

CTN :42866941

08 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For fabrication & supply of: item no. (i) 11 [fabrication & supply of: item no. (i) 11200 mm o/r (curved) fan shaped switches for 1 in 16, t/out for bg 60 kg (uic) on psc sleepers to rdso drg. no. t-5692 alt. 4 with latest alternation, complete with stock rails and all parts including check rails as listed in the drawing but excluding grooved rubber sole plates, insulating liner, elastic rail clip, plate screw, fish plates and fish bolts & item no. (ii) 12460 mm o/r (curved) fan shaped switches for 1 in 20, t/out for bg 60 kg (uic) on psc sleepers to rdso drg. no.]

Central Government/Public Sector

CTN :42781489

20 Nov, 2025 NA

Chandigarh - Chandigarh

Tender For procurement of miscellaneous consumables thermal insulation sheet 5 layer (met pet film + co-polymer bonding + , woven fabric + co-polymer bonding + epe foam 3mm) , velcro male-female set width ~2 inch, 25m, olive green colour , velcro male-female set width ~2 inch, 25m beige/light brown col , aluminium bubble sheet double layer, 4mm, 1.2m*60m , aluminium bubble sheet double layer, 12mm, 1.2m*30m , velcro male-female set width 1 inch, minimum 25m length, olive green , colour , velcro male-female set width 1 inch, minimum 25m length, beige/light , brown colour , transparent double sided tape (~45mm-50mm/1.75-2 inch) length , minimum 10m. , transparent double sided tape (~19mm-26 mm/.75inch-1inch) length , minimum 10m. , rockwool fiber 50mm (1m*0.5m) , multicolor camonet patches 1sq.ft # , buckle 1 inch olive green colour and 100 quantity in beige/light brown) , buckle 1 inch in beige/light brown colour , high emissivity paint 10 ltr # , low emissivity paint 10 ltr # , reinforced rubber sheet 10mm, ~50 sq.ft

Central Government/Public Sector

CTN :42764292

24 Nov, 2025 NA

Yamunanagar - Haryana

Tender For supply of head stock pressing (r. h.). drawing no:- wd - 84014 - s - 14, alt. 2, item no. 1 . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :42840774

03 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of 2.5 sqmm, gnye (green-yellow) colour, el [2.5 sqmm, gnye (green-yellow) colour, electron beam irradiation curingprocess thin walled flexible elastomeric cable with copper conductor suitablefor rolling stock application conforming to rdso spec.no.elrs/spec/elc/0019,rev.4, feb-2018, 1.8 kv grade. material to be procured from rdso approved sources only. (rdso item id : 3100270 & 3100449)]

CTN :42840931

20 Nov, 2025 NA

Kharagpur - West Bengal

Tender For supply of side buffer casing (casting) for coaching stock.drawing no. : rdso's drg. no. sketch - 94043, alt. 5, item no. 1.material and specification : as per drawing.

Central Government/Public Sector

CTN :42269989

19 Nov, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras bid to ras corrigendum : supply of ff8251019281 drg item 2 drg no 04 01 028 r1 box nut as per drg , ff8252950027 drg no 04 05 006 r0 feed screw nut r h in pilot bore , ff8252950035 drg no 04 05 007 r0 nut in pilot bore , ff8251520487 drg 04 06 010 rev nut for lead screw , ff8252100163 drg 04 18 001 r1 box nut as per drawing , ff8255010033 drg 04 24 012 box nut for lead screw , ff8252950191 drg no 04 28 003 r0 nut for lead screw in pilot bore , ff8252950183 drg no 04 28 021 r0 box nut in pilot bore , ff8251020140 drg 04 29 015 box nut for cross slide , ff8251520720 drg 04 33 026 r1 box nut of head stock for hb220 as per drawing , ff8252950280 drg 04 33 064 lead nut as per drawing , ff8252950272 drg 04 33 063 lead nut as per drawing , ff8252950299 drg 04 33 065 lead nut as per drawing , ff8251100810 drg 04 34 006 lead shaft box nut as per drawing , ff8252950248 drg no 04 36 012 r0 box nut in pilot bore , ff8252950094 drg no 04 37 009 r0 nut left hand in pilot bore , ff8251540151 drg 04 37 36 adjusting nut of ram movement as per drg , ff8251540178 drg 04 37 037 main nut of ram movement , ff8251160014 drg 04 37 044 r0 box nut right head lead screw as per drg , ff8251620112 drg 04 38 002 box nut as per drawing , ff8251130069 drg no 04 43 019 tail stock screw with nut drg no 04 43 005 , ff8251130077 drg no 04 43 006 cap nut , ff8252100155 drg 06 13 012 box nut for lead screw as per drawing

CTN :42681393

27 Nov, 2025 5.00 Lacs

Hisar - Haryana

Tender For supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coating, item name

CTN :42725193

25 Nov, 2025 NA

Bahraich - Uttar Pradesh

Tender For supply of procurement of non stock item for rs department.

CTN :42725194

25 Nov, 2025 NA

Bahraich - Uttar Pradesh

Tender For supply of procurement of non stock item for rs department.

CTN :42671638

24 Nov, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of ram assembly with bush fitted for 10 inch bmbs brake cylinder (knorr design) to kbi part no. 778065,bush to kbi part no.776539(already part of ram assembly) or equivalent(similar make shall be considered from those manufacturers who are either approved source of rdso item id 3100220 bogie mounted brake system for freight stock or delisted firms vide rdso letter no.mw/apb/bmb dated 23.08.22.compatible with knorr bremse design bmbs system)

Bubble Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector