Latest bubbler nozzle Tenders | Government bubbler nozzle Tenders

Central Government/Public Sector

CTN :39884626

21 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For supply of preloaded, acrylic, single piece, hydrophobic, monofocal, posterior chamb er intraocular lens with uv filters, 5.75 to 6.25mm aspheric optic, 12.5 to 13mm haptic, w ith square edge optic, nozzle tip outer diameter less than or equal to 1.7 mm ]

Corporations And Associations And Others

CTN :39666621

15 Apr, 2025 NA

Yamunanagar - Haryana

Tender For corrigendum : supply of spares for collecting tower for ahp - "complete wetting head tail piece with lower pipe,moc-aci" , ms cone 10mm sheet for collector tower , "fogjet nozzle for air washer assy.(01 set = 21 nozzles)nozzle tip- ss304/316nozzle body - bronze"

State Government

CTN :39890517

14 Apr, 2025 NA

Jharsuguda - Odisha

Tender For supply of coal nozzle with tip for burner

Central Government/Public Sector

CTN :38945435

07 Apr, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of training materials for different trade courses - annealed copper tube o.d. i.s.i. grade, flare nut (brass) i.s. grade, refrigerant 134a, 450 g container, refrigerant hc blend 170 g container, refrigerant 22, pin valve (non-return valve) o.d., brazing stck, brazing gas (butane) 220 g container, capillary tube 0.031 , (0.7 mm) i.d., dead nut e.d. (brass), terminal clip (motor), three-way hand shut o valve o.d., capillary tube 1.25 mm i.d. for ac, gas charging flexible pipe 3 long, dia., 450 psig, filter drier (pencil type) two leg type for refrigerator, o.d., m.s. flat (50 6) mm, m.s. pipe o.d. 50 mm 3 mm wt, m.s. electrode 3.15 mm, wooden hammer handle length 300 mm, 3 mm dia. g.i. wire, file handle (plastc) 4 , wooden mallet (round) dia. 70 mm length 125 mm, m.s. flat 50 mm 8 mm, m.s. flat 50 mm 10 mm, m.s. flat 65 mm 8 mm, m.s. flat 75 mm 10 mm, hacksaw blade 300 mm 12.5 m 24 tpi, mahogany wood -2 1 6 -0 , mahogany wood -2 1.5 6 -0 , mahogany wood -2 2 6 -0 , mahogany wood -3 1 6 -0 , mahogany wood -3 1.5 6 -0 , mahogany wood -4 1 6 -0 , mahogany wood -6 1 6 -0 , sal wood - 2 2 6 -0 , sal wood - 3 1 6 -0 , pine wood -2 2 6 -0 , pine wood -3 1 6 -0 , pine wood -6 1 6 -0 , gamari wood - 2 2 6 -0 , gamari wood - 2 2 6 -0 , m.s. round dia. 50 mm, m.s. round dia. 65 mm, m.s. round dia. 38 mm, m.s. flat 100 mm 10mm, grinding wheel (course a24 150mm 20mm 31.75mm) with bush (1 ), grinding wheel (coarse c24 300mm 50mm 50.80mm) withbush 2 1 , lubricatng oil (servo cut s 68), hss tool bit s-500 (3/8 3 ), power saw blade (30 0mm 25 mm 1.25 mm), hss (10), power saw blade 14 1 0.050 (300 mm 25 mm 1.25 mm), hss (10), lt control reversing switch 32 amp, 3 phase, m.s. flat (6 50) mm, m.s. flat (8 50) mm, m.s. flat (10 50) mm, m.s. pipe 50mm wall thickness 3 mm, each length 20 , m.s. electrode 3.15 mm, c.c.m.s. filler rod 1.6 mm, m.s. sheet 2 mm thickness, size 4 8 , m.s. sheet 3 mm, size 4 8 , aluminum sheet 3 mm, size 4 8 (grade-1100), mig welding wire spool (0.8 mm), mig welding wire spool (1.2 mm), silicon spray for mig w/l, mig w/l contact tip nozzle as per sample 0.8 mm, mig w/l contact tip nozzle as per sample, 1.2 mm, collet & ceramic nozzle for tig welding as per sample (4 nos), collet & ceramic nozzle for tig welding as per sample (5 nos), collet & ceramic nozzle for tig welding as per sample (6 nos), p.v.c. conduit pipe , p.v.c. elbow, p.v.c. tee, p.v.c. socket, p.v.c. 3 3 book with cover, p.v.c. 8 6 book with cover, ceiling rose, p.v.c. angle holder, 1 sq. mm. copper flexible wire, 1.5 sq. mm copper flexible wire, 2.5 sq. mm copper flexible wire, power contactor, 2 no + 2 nc, l&t, overload relay 14a, l&t 400v, on push, (heavy duty) red colour 6a, 400v, off push, (heavy duty) red colour 6a, 400v, digital times for star-delta starter, control panel indicator red, 230v, 22 mm, control panel indicator yellow, 230v, 22 mm, control panel indicator blue 230v, 22 mm, 36 swg super enameled wire, intermediate switch 6a, 230v, one way switch, 6a, 230v, two-way switch, 6a, 230v, 3-pin top, 6a, 230v, 3-pin top, 16a, 230v, pendent holder 6a, 230v, incandescent lamp, 200w, 230v, 6a socket, 230v, p.v.c. adhesive tape (red), p.v.c. adhesive tape (yellow), p.v.c. adhesive tape (blue), bridge rect er 35a, metal case single phase, 230v, hook up wire 1/25, diode 4007 ic, 7806 ic, resistors 15k, w, 680 w, 4.7k w, 10 k , w, 1 k , w, 3.9k , w, 3.3 k, w, 5.6k w, 120 , w, 8.2 k , 180 , w, 560 , 1/4w- each item 100 pcs, diode 1n4007,, zener diode 6v, 9v, 12v, 1w each item 50 pcs., transistor cl100, 5k100, each item 50 pcs., vero board 5 2.5 , vero board 5 6 , wire hook up wire (1/25) black, red, yellow, blue, green one roll for each colour, flexible wire 1 sq. mm, red, flexible wire 1 sq. mm, black, arduino uno board with usb connectng cable, ic mk484, rtd sensor pt 100, ldr big size, ic cd4017, lm7805, each item 25 pcs., transistor tip122, diode 1n4148, 5402, each item 100 pcs, led driver board for 9w & 12w le

CTN :39854175

15 Apr, 2025 26.97 Lacs

Kota - Rajasthan

Tender For tn-11166 supply of m/s dcips make spares for clinker grinder, jet pump and feed gate for bottom ash hopper and wetting head system for wet ash disposal from esp hoppers unit 5 ash handing plant of kstps, kota. - spares for excen crusher (clinker grinder) as per drg. no. 92-p-07-2b-582 of ahp stage-iii, cam group structure, material-durite, 500 bhn (part no. 1) 1 set = 8 nos., wear plate front (part no. 3) 1 set = 3 nos., wear plate back (part no. 4) 1 set = 3 nos., wear plate side (part no. 5) 1 set = 4 nos. (2 rh & 2 lh), shaft (shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) material en24 part no. 2 - 1 set = 1 no., bearing housing for above clinker grinder (part no. 7), packing gland followers (part no. 12), packing gland (part no. 9) 1 set=2 nos., slinger (part no. 14), lantern ring material al. bronze(part no. 10), shaft sleeve ss410 (part no. 15), special type self locking square head bolt (ss410) with nut & lock nut with washer for segment plates, jet pulsion pump as per drg. no. 92-p-07-2b-591, jet pulsion pump complete assembly (1 no.) assembly consists of body combining tube, nozzle with insert, adapter, aligning ring flange clamp etc. but without tail pipe, spares for jet pulsion pump as per drg. no. 92-p-07-2b-591, combining tube, material -durite 500 bhn (throat cum tail pipe) (part no. 1), nozzle tip (ss-410) with nozzle insert (material ceremic) (part no. 2 & 13), nozzle adapter (part no. 3), flange clamp half , material ductile iron (n-8)(part no. 16), 9 flange clamp half (part no. 18), aligning ring (part no. 10), spares for ba hopper feed gate as per drg. no. 92p07-1b-572, renewable seat strip (part no. 2), side liner (part no. 3), bottom liner (part no. 4), roller (part no. 17), bush for roller (part no. 25), adjustable seating wedge (part no. 13), fly ash intake valve drg. no. 9207-2b-22, fly ash intake valve complete as per drg. no. 9207-2b-22, fly ash intake valve spares parts: -, hopper inlet body spares for faiv (part no. 1) for fly ash intake valve, body intake valve spares for for fly ash intake valve (part no. 2), nuva alloy 8 inch tee for ash intake valve (part no. 3), valve disc spares for for fly ash intake valve (part no. 4), removable seat spares for fly ash intake valve (part no. 5), shaft spares for fly ash intake valve (part no. 6), spring spares for fly ash intake valve (part no. 7), roll pin spares for fly ash intake valve (part no. 8), air cylinder 2.5" borex5" stroke spares for fly ash intake valve (part no. 9), yoke spares for fly ash intake valve (part no. 13), lever spares for fly ash intake valve (part no. 14), lever spares for fly ash intake valve (part no. 15), seal kit for air cylinder 2.5 bore x 5 stroke of fly ash intake valve, air intake valve drg. no. 9207-2a-11, air intake valve complete as per drg. no. 9207-2a-11, air intake valve spares parts: -, body spares for air intake valve (part no. 1), valve disc, ss- 316 spares for air intake valve (part no. 2), compression spring, steel-en 42b spares for air intake valve (part no. 3), valve stem, ss-410/416 spares for air intake valve (part no. 4), totally enclosed rotary slide gate drg. no. 9207-2a-40, totally enclosed rotary slide gate valve complete as per drg. no. 9207-2a-40, totally enclosed rotary slide gate (tersg) spares parts: -, bode spares for totally enclosed rotary slide gate valve (part no. 1), slide spares for totally enclosed rotary slide gate valve (part no. 2), shaft, en-8 spares for totally enclosed rotary slide gate valve (part no. 3), bush, bronze spares for totally enclosed rotary slide gate valve (part no. 4), seal strip, nitrile rubber spares for totally enclosed rotary slide gate valve (part no. 5), air cylinder spares for totally enclosed rotary slide gate valve (part no. 10), wetting unit head assembly spares parts:, body inlet piece, alloy ci spares for wetting unit head assembly (part no. 1), water chamber, fg-220, is-210 spares for wetting unit head a

Central Government/Public Sector

CTN :39874821

08 Apr, 2025 NA

Bhusawal - Maharashtra

Tender For supply of tamper check paste(30ml) (highly visible,viscous and fluorescent in nature) colour: orange, tip size: 2.9mm approx, extra nozzle of 1 mm & 2 mm. [ warranty period: 30 months after the date of de livery ]

CTN :39860135

21 Apr, 2025 NA

Kanchrapara - West Bengal

Tender For torque marking paste/tamper check paste tube (60ml) red in color, tip size-2.9mm with exte nded nozzle with variable points of 1mm & 2mm, marking length 5.6 to 6.6 meters. highly visible fluoresce nt colors & excellent adhesion as well as safe on metal & all other surface. make: century or similar, suppli ed items should have a valid / balance shelf life of more than 12 month from the date of supply [ warrant y period: 30 months after the date of delivery ]

CTN :39835304

05 Apr, 2025 NA

Kolar - Karnataka

Tender For supply of torch mtg 600e , torch head assy , co2 cable assy , adaptor , wire spiral , wire spiral 1 point 6 mm , insulater gn 0150102594 , tip , socket short , clamping sleeve , insulator torch head set of 05 nos , gas hose a150102550 , protective sheathing s12070030196 , gas nozzle , socket long set of 05 nos , teflon liner dia 1 point 6 a wire , adaptor sleeve , adaptor nut , o ring set of 04 nos , nozzle cleaning tool set of 05 nos

corporations/Associations/Others

CTN :39457879

09 Apr, 2025 4.98 Lacs

Koderma - Jharkhand

Tender For corrigendum : supply of boiler spares - scanner cooling rubber hose pipe impregnated) (wire for burner, size:o.d=70mm,i .d=50mm,length=1500 mm (approx.) split pin dia , 3.5mm , length:50mm , fin for water wall 12mm width x 6mm ??? , fin for scw size: 89.8mm x 6mm (material:is2062gra) , chain connector link for lrsb long chain , bolt with nut & washer for boiler drum manhole door: m 30 x 3, length-280 mm. material-sa 105 , clam fix turbo separator mat-en19 (spare for boiler drum internals) , coal nozzle tip support bracket , wire netting of trough seal, size: 4.5mm dia wire rod, width-700mm double folded, length-1770mm, wire mesh-12x12mm, matl-ss304. , bolt & coupling rubber bush nut with , oil seal: 20x32x7 mm

Central Government And Public Sector

CTN :39802299

02 Apr, 2025 NA

Bongaigaon - Assam

Tender For supply of temper check paste 30 ml ( highly visible , viscous and fluorescent in nature) color :- orang e , tip size 2.9mm , extra nozzle of 1mm,& 2mm should be provided as per rdso latest standard. make : c entury or similar [ warranty period: 30 months after the date of delivery ]

Bubbler Nozzle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector