Latest bulb thermometer Tenders | Government bulb thermometer Tenders

Central Government/Public Sector

CTN :39205981

25 Feb, 2025 5.00 Lacs

Kottayam - Kerala

Tender For supply of minimum thermometer , dry bulb thermometer , wet bulb thermometer , soil thermometer , soil thermometer , water thermometer , charts for self recording , charts for sunshine recorder. , measuring bucket , rain measuring cylinder , cup-counter anemometer , rainguage

Central Government/Public Sector

CTN :39201009

18 Feb, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For purchase of equipment the thermal analyser under the national technical textile mission(nttm)

CTN :39205525

25 Feb, 2025 NA

Datia - Madhya Pradesh

Tender For supply of altimeter , arrow ground pin , barometer digital , chain and tape with arrow 30m. , drawing instruments box wooden , dry and wet bulb thermometer , dumpy level with stand , flexi curve , geomorphological model gm1 and gm2 , globe golden type , globe simple type 12 inch , solar system type globe , phase of moon , model of earth layer , levelling staff aluminium mode , map of india 3d model framed , map of world 3d model framed , maximum and minimum thermometer , meter scale , mirror stereo scope in wooden box , plain table full set heavy , plumb bob , prismatic compass with stand , rain gauge brass , ranging rod stand , ranging rod folding type , rocks and minerals set , spirit level , tracing table with light , wind vane all metallic , binoculars , truff compass , alidade 18 inch , anyroid barometer demostration , white board , anemometer model , notice boards 80 by 60cm rf maroon , beam campass , hammer , hygrometer , hygrometer auto , atlas , stee rack , podium , big table.

CTN :39213471

11 Feb, 2025 65.00 Lacs

Jodhpur - Rajasthan

Tender For bio control lab equipment for dr. brc ars mandor - bod incubator, incubator shaker, rotary shaker, laminar air flow, autoclave, refrigerator 2-8c, hot air oven, electronic weighing balance, mixer (blender), moisture analyzer, distillation unit, deep freezer, colony counter, microscope with camera, refrigerated centrifuge, microwave oven, vortex mixer, magnetic stirrer cum hot plate, ph meter, air conditioner, online ups with battery backup(5kv), thermal cycler, gel documentation system with accessories, gel electrophoresis unit, spectrophotometer, mini centrifuge, dry bath, hot water bath, ice flaking machine

CTN :39186238

11 Feb, 2025 NA

Baraut - Uttar Pradesh

Tender For design installation and maintenance of educational lab - vocational lab; site preparation; buyer -1. provision of water supply, drainage pipeline for chemistry lab "the scope of work includes the design, supply, and installation of a 3/4 water supply pvc pipeline and a 2 drainage pvc pipeline for the chemistry lab, with both pipelines to be laid below floor level in accordance with the relevant standards. the water supply pipeline will be installed to deliver water to six wash basins located at lab tables, with all necessary piping, fittings, valves, and accessories provided to ensure proper water flow and functionality. the drainage pipeline will be installed for the safe removal of liquids from the wash basins, connecting to the existing drain system in compliance with local plumbing codes. the contractor is responsible for providing and installing all required pipes, fittings, junctions, seals, and ensuring proper slope for the drainage system to ensure it functions without leakage or obstruction. upon completion, the installed systems will be tested for functionality, and the floor will be leveled and prepared for tiling, with tiles installed in accordance with the specified quality standards and design. all materials used must conform to the relevant industry standards for durability and safety." 01 job, 2. installation of taps in chemistry lab wash basins "supply and installation of 2 taps per wash basin, located at each of the lab tables 06 nos. in the chemistry lab. the work includes ensuring correct connections, installation of necessary pipework, and verifying water-tightness and functionality of the taps. all components must be of high quality and suitable for laboratory conditions, ensuring ease of use and long-term durability." 01 job, 3. installation of exhaust fan system for chemistry laboratory "supply and installation of an exhaust fan system within the chemistry laboratory to ensure proper ventilation, facilitate the removal of hazardous fumes, and maintain a safe working environment. this installation shall include secure mounting, electrical wiring, a variable speed controller, and protective grills with all necessary arrangements, equipment and accessories." 02 job 4. provision of 3-phase electrical supply for strength of materials/ engineering mechanics lab "provision and installation of a 3-phase electrical supply from the existing mcb board to the strength of materials/ engineering mechanics lab located on the ground floor. this includes the installation of all necessary electrical cabling (4 sqmm /6 sqmm), 63 amp. 2 nos. & 32 amp. 4 nos., 4 pole individual mcb with box, connectors, and circuit protection devices, ensuring compliance with relevant electrical safety standards. the installation must be capable of supporting the lab's power requirements while maintaining optimal operational efficiency." 06 job 5. construction of foundations for thermal lab equipment "design and construction of reinforced concrete foundations to support 2 units of lab equipment (approximate measurements in meters (0.95 x 0.45 x 0.3) and (1.0 x 0.6 x 0.2)) in the thermal lab on the first floor. the specifications of work may evolve during the course of the project and foundations must be engineered to accommodate the weight and dynamic loads of the equipment while ensuring stability and long-term durability. all excavation, reinforcement, and concreting work must be carried out per the specified structural design, ensuring compliance with relevant building codes and safety regulations." 01 job 6. vibration damping foundations for thermal lab equipment "supply and installation of specialized vibration damping foundations (approximate measurement in meters (1.6 x 0.85 x 0.3)) for the morse test lab equipment in the thermal lab located on the first floor. the specifications of work may evolve during the course of the project and these foundations must be engineered to effectively mitigate vibration and noise caused by the o

Central Government/Public Sector

CTN :39157126

18 Feb, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For purchase of equipment the thermal analyser under the national technical textile mission(nttm)

Central Government / Public Sector

CTN :39154932

12 Feb, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of flash arrestor (dry type) for regulator end oxygen lines to prevent flash back in oxy fue l system conforming to en 730/iso 5175-1/15 11006 standards with flame arrestor(fa) and non return v alve(nrv) and thermal cut off valve(tv) working pressure 15 bar end connection g 3/8%u201d rh to en 560/iso 3253 standards make messer(dgn oxy) or gce(fr-34 r oxy) or witt (oxygen rf53n only note: 1) of fers on oems or their authorised dealers enclosing valied authorised delership clarification on will be considered. 2) the suppliers shall send test certification from govt. autherised test house in case of in in case of interntional brand the test certificate from reputed institue like bam germany is mand atory. 3) the suplier should have equipment for testing of flash back arrestors and calibration. the p urchaser has the right to inspect these installations. spec: en 730/iso 5175-1/15 11006 specn: spec: en 73 0/iso 5175-1/15 11006 [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :39118870

11 Feb, 2025 NA

Trivandrum - Kerala

Tender For supply of electronic lab equipments - supply of electronic equipment s, high sensitivity oscilloscope with very low noise (as per the specification mentioned in annexure-5), programmable dc power supply (as per the specification mentioned in annexure-5), digital storage oscilloscope, 2.5gs/s (as per the specification mentioned in annexure-5), digital storage oscilloscope, 6.25gs/s (as per the specification mentioned in annexure-5), dc electronic load (as per the specification mentioned in annexure-5), dc bidirectional power supply +load (as per the specification mentioned in annexure-5), scope meter, hand held and battery operated (as per the specification mentioned in annexure-5), scope meter, hand held and battery operated with can, i2c, spi etc- 4 channel isolated (as per the specification mentioned in annexure-5), thermal imager with 2 lens and mounting (as per the specification mentioned in annexure-5), vibration tester (as per the specification mentioned in annexure-5), insulation tester (as per the specification mentioned in annexure-5), stroboscope (as per the specification mentioned in annexure-5), power quality analyser (as per the specification mentioned in annexure-5), lcr meter (as per the specification mentioned in annexure-5), igbt stack, 4 leg 2khz, 30a with rectifier (as per the specification mentioned in annexure-5), igbt stack, 4 leg 20khz, 90a with front end igbt based rectifier (as per the specification mentioned in annexure-5), pcb assembly & rework station (as per the specification mentioned in annexure-5), digital true rms multimeter-high accuracy (as per the specification mentioned in annexure-5), clamp meter-high current (as per the specification mentioned in annexure-5), handheld lcr meter (as per the specification mentioned in annexure-5), digital true rms multimeter (as per the specification mentioned in annexure-5), clamp meter (as per the specification mentioned in annexure-5), blast proof trolley for drive (as per the specification mentioned in annexure-5), hv compliant tool box set (as per the specification mentioned in annexure-5)

Central Government/Public Sector

CTN :39113870

07 Feb, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply and application of thermal insulation of equipment and piping at kudankulam npp unit 3 - supply and application of thermal insulation of equipment and piping- fixed type insulation. refer tcc vol i part i chapter viii, item no. 1.1.1.1 , supply and application of thermal insulation of equipment and piping- fixed type insulation. refer tcc vol i part i chapter viii, item no. 1.1.1.2 , supply and application of thermal insulation of equipment and piping- fixed type insulation. refer tcc vol i part i chapter viii, item no. 1.1.1.3 , supply and application of thermal insulation of equipment and piping- removable type insulation. refer tcc vol i part i chapter viii, item no. 1.1.2.1 , supply and application of thermal insulation of equipment and piping- removable type insulation. refer tcc vol i part i chapter viii, item no. 1.1.2.2 , supply and application of thermal insulation of equipment and piping- removable type insulation. refer tcc vol i part i chapter viii, item no. 1.1.2.3 , supply and application of aluminium foil of 0.1 mm thick. refer tcc vol i part i chapter viii, item no. 1.1.3 , aluminium cladding. refer tcc vol i part i chapter viii, item no. 1.2 , cold insulation of pipeline and equipment. refer tcc vol i part i chapter viii, item no. 1.3.1 , cold insulation of pipeline and equipment. refer tcc vol i part i chapter viii, item no. 1.3.2 , cold insulation of pipeline and equipment. refer tcc vol i part i chapter viii, item no. 1.3.3 , cold insulation of pipeline and equipment. refer tcc vol i part i chapter viii, item no. 1.3.4

corporations/Associations/Others

CTN :39103649

17 Feb, 2025 NA

Cuttack - Odisha

Tender For supplyand installation ofscience lab equipment to govt womens college sundargarh - science lab equipments (zoology), dissolve oxygen meter-micro controller, magentic stirrer, student microscope - economy model, pcr -96 weelcomplete with all acessories, vortex mixer, refrigerator, beaker, digital blood pressure monitor, premanent slides of all tissue, sphygmmano meter, skeletons of bird, skeletons of mammal, permnent slides of t.s. oesophagus, stomach, intestine, ovary, testics, thymus, sleen, liver, molecurlar biologysmart pcr 7 inch lcd - automatic, science lab equipments (botany), sohxlet apparatus, digital spectorphotometer with pc, vacuum dessicator and dessicator cabinet, hplc with pda detector, electronics balance, double door refrigerator, herbarium cabinet, herbarius press, gas chomatography, plant photosynthesis meter, microcentrigue, rotary evaporator, micropipettee set, autoclave, pcr -96 weelcomplete with all acessories, tripod stand, glassware set, was bottle, hot air oven, electronics balance, deep frezer, millipore water system, ultrasonic bath, plastic wares, science lab equipments (physics), quantum mechanics, spliting of dpph using esr technique, zeeman effect with(triplet & doublet) 1 mp camera, solid state physics, to mesure the magnetic susceptibility of solids, element of modern physis, to setup the millikan oil drop apparatus and determine the charge of elecron (with pc connectivity facility), wave & optics, meldes experiment with 3 a power supply, thermal physics, to determine the temperature coefficient of resistance by platinum registance thermometer, electricity& magnetism, slef inductance of a coil by andersons bridge with null detector, constant deviation spectorgraph, science lab equipments (chemistry), gas chomatography, conductivity meter, hplc with pda detector, polarimeter, kjeldahl apparatus, water and soil analysis, oxgen meter with dissolve oxygen probe - digital do meter, cod meter, bod incubator, suction pump, karl fisher titrator, double distlled water assembly, digital muffle furnace, furnace, high volume air sampler, rotary evaporator, deep freezer, digital tds meter

Bulb Thermometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others