Latest burette clamp Tenders | Government burette clamp Tenders

CTN :45374531

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Central Government And Public Sector

CTN :45061375

16 May, 2026 23

Hubli - Karnataka

Tender For supply of medical equipment to vrdl kmcri hubli - pcr cooling blocks-, laboratory centrifuge-, bio safety cabinet of class ii, type a2-, elisa reader-, automated elisa microplate washer-, refrigetaor-, minus 80 degree deep freezer -, labarotory incubtor-, pcr work station-, microwave oven--, vertical -20 degree deep freezer-, vertical autoclave (conventional)-, power pack for gel electrophoresis-

State Government

CTN :44919726

04 May, 2026 20.73 Lacs

Raichur - Karnataka

Tender For procurement of lab glasswares and lab apparatus to rtps - combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, flask-volumetric-50 ml, flask-volumetric-250 ml, flask-volumetric- 500 ml, flask-volumetric- 1000 ml, funnel -50 mm, funnel -100 mm, separating funnel, pipettes-1 ml, pipette-s- 5 ml, pipette-s- 10 ml, pipette-s- 25 ml, rubber bellow for auto burette, cylinder-with stopper-250 ml, reagent bottle/plastic 1000ml, hydro meter sp.gr. 1 - 2.0, rubber blader for pipettes, round bottom flasks -250ml, round bottom flasks-500ml, reflux condensors-400mm, pipettes / bulb type - 50ml, corrosion coupon rack, bactaslides(yeast&fungi), bactaslides(pseudomonas), bactaslides(srb), bactaslides(e-coli), bio-foluling monitor, combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, fl

Central Government/Public Sector

CTN :44755495

04 May, 2026 NA

Duliajan - Assam

Tender For corrigendum : tender for supply of laboratory glassware and chemicals : : - cylinder with stopper 100 ml , cylinder with stopper 50 ml , cylinder with stopper 25 ml , cylinder with stopper 10 ml , blue capped sample bottle 1 l , blue capped sample bottle 500 ml , blue capped sample bottle 250 ml , blue capped sample bottle 100 ml , reagent bottle with dropper 250 ml , separating funnel 250 ml , beaker 50 ml , beaker 100 ml , beaker 250 ml , beaker 500 ml , beaker 1 l , plastic beaker 5 l , plastic beaker 2 l , plastic beaker 1 l , measuring cylinder 10 ml , measuring cylinder 100 ml , measuring cylinder 250 ml , measuring cylinder 500 ml , measuring cylinder 2 l , soxhlet extraction set , laboratory heating mantle , burette stand , burette clamp , graduated pipette 5 ml , graduated pipette 1 ml , pipette sucker upto 10 ml , silica nanoparticles , poly diallyldimethylammonium chloride , polyethylenimine , 1 allyl 3methylimidazoliumbis , furfural 99 percent , choline chloride less than equal 99 percent , toluene , chloroform , acetic acid 500 ml per bottle

CTN :44952915

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44952916

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44938421

04 May, 2026 NA

Badaun - Uttar Pradesh

Tender For supply of science - lab stools revolving stainless steel, burette clamp with iron stand iron, burette b grade, test tubes 13 ml, pipette 10 ml,, conical flask 100ml., graduated centrifuge tube 15ml,, reagent bottle 250ml. soda gilass, inverter with battery, kipp's apparatus, plastic 1.0 lir, hot air oven, electronic top pan balance max220gmmin. img, melting point apparatus manual, ph meter, colori meter

CTN :44942569

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/09/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 008839 vph 2) se 908914 rs 3) se 908915 rs 4) se 908981 art/rhv 5) se 918921 ce 6) se 898964 art/sv nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos.serviceable bogies against srl no: 02-02 (bogie no.1831/07 & scn 057/15), srl no.05-02 (bogie no accw 5143/04 & 052360/05), srl no.06-01 ( bogie no. scn 1366/14) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 03-02, srl no.04-02, and srl no 06-01no. (d)the coaches are to be sold with 04 nos. ng rail. against srl no.02 and 03. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Central Government/Public Sector

CTN :44652989

16 Apr, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of lab chemicals c c - hydrochloric acid 35 percent ar grade pack size 5 ltr. , nitric acid ar grade 69 percent pure pack size 2.5 ltr , starch soluble extra pure grade pack size 500 gram , filter paper circles qualitative grade 101 in pkt of ioo circles dia 12.5cm , plastic cylinder graduated single metric scale with pour out with hexagonal base cap. 1000ml , perchloric acid ar grade min.70percent assay packing-2.5 ltr. in glass bottle with coa , lead monoxide lr sq litharge , beaker griffin low from with spout 600ml , sieve test brass with frame 8 inch dia. mesh 200 , sieve test brass with frame 8 dia. mesh 100 , flask volumetric with interchangable stopper 250ml class a , indicator universal solution ph 2.00 to14 , flask volumetric 1000ml class a , pipette graduated mohr class a capacity 5 ml , flask volumetric with interchangable stoper 100ml class a , pipette graduated mohr class a capacity 10 ml , burette cap 50 ml straight bore stop cock a class. , burette cap 25 ml straight bore stop cock a class. , plastic funnel long stem 60 deg. dia 75 mm , burette clamp pp double , dropping bottle ldpe cap 125 ml , sodium thiosulphate ar grade with coa , dry acetylene regulator double stage ss , silica sand for fire assay in gold and silver analysis size less than 0.5mm purity more than 95.0 percent with certificate

CTN :44538471

02 Apr, 2026 NA

Panchkula - Haryana

Tender For supply of laboratory plastic ware and miscellaneous items : : - single burette clamp retort clamp , single burette clamp fisher type , laboratory beaker 100 ml , laboratory beaker 250 ml , laboratory beaker 500 ml , laboratory beaker 1000 ml , laboratory beaker 2000 ml , plastic container 50 ml , plastic container 100 ml , plastic container 200 ml , plastic container 500 ml , plastic container 1000 ml , rectangular plastic container 2500 ml , cotton duster 12x12 inch , plastic pouch 3x6 inch , plastic pouch 6x9 inch , plastic pouch 9x12 inch , plastic pouch 12x18 inch , micro centrifuge tubes , micro spatula as per is3888 8inch , micro spatula as per is3888 12inch , micro spatula as per is3888 ptfe , hydraulic pressure gauge , laboratory hot plate , wash bottle 500 ml , wash bottle 1000 ml , plastic phial 10 ml , dial type pressure indicating gauge

Burette Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector