Latest burial service Tenders | Government burial service Tenders

State Government

CTN :39844700

11 Apr, 2025 1.50 Lacs

Multi City - Telangana

Tender For tggenco-ktpp-civil - envd-water spraying with additional water tanker along the kaccha road behind weigh bridges, on dubbapally road from silo area to chelpur junction from 01.04.2025 or from actual date of utilization to 30.06.2025 or actual date of completion.

CTN :39803137

22 Apr, 2025 1.10 Crore

Bangalore - Karnataka

Tender For supply, installation, commissioning and operation of 1000kg per day capacity amla processing plant at karnataka state lamps cooperative federation, mysuru under ntfpce project-fruit washer with elevator: water jet washing of amla fruits and feeding same to screw blancherfunction: for through washing of amla fruits and feeding same to screw blancher construction: it consists of 4 sections; soaking, washing with agitation, fresh water spraying, water draining. stainless steel rectangular shaped tank with legs, cross supports etc. the water in the tank is agitated with the help of high-speed blower through perforated air pipes installed at the bottom of the tank. the bubbles are generated with the help of high-speed air blower, which is an integral part of washer. circulation pump to create water jet to pushing fruits towards elevator. continuous polypropylene stackable slat conveyors with flights the fruit washer tank will be provided with bottom drain connection, water level adjusting arrangement with overflow connection, and fresh water spraying arrangement, feed hopper, discharge chute, motor shroud, chain guard. variable speed drive using vfd motor hindustan/equivalent make, gearbox: bonfiglioli /equivalent make. input capacity: 100 kg / hr. overall dimensions: 2780 mm (l) 770 mm (w) 1874 mm (h) (as per the supplier design and site conditions) elec. power: blower: 0.5 hp, main drive: 0.5 hp circulation pump : 0.5 hp water consumption: 200 ltr m.o.c: ss 304, water recirculation and proper drainage arrangement for the system.feeding table: collecting the amla from the farms and feeding the same to fruit washer 1.2mm thick gauge ss table top and raised edges. drain outlet at one end, square tube structure. size: approx. 1700 mm (l) x 900 mm (w) x 850 mm (h)m.o.c:- wetted parts stainless steel 304 grade (ss 304)belt type continuous blancher function: suitable for blanching of amla fruit for easy separation of the segments. construction: continuous cooking of amla approx. 85 c - 90c.capacity:- 150 kg/hr heating chamber is rockwool insulated & covered by stainless steel sheets. small discharge chute at the end of screw for removing amla fruit out of the chamber. stainless steel self-supporting structure. all necessary steam fittings complete with temperature indicator, y strainer, steam trap, safety valve thermal insulation coating for steam lines and hot lines. retention time approx. 8 to 10 minutes (finalized during detail engineering). stainless steel control panel complete with variable speed frequency drive necessary electrical fittings temperature sensor and auto cutoff steam requirement: 100 to 150 kg. / hr. @ 2.5 kg./ cm2 belt width 400 mm wide 4500 m long approx. suitable for blanching fruits blanching temperature 85c to 95c pp food quality modular belt, suitable for high temperature for smooth operation and high reliability suitable for products transferring in hot water. hot water pump used for water circulation through spray nozzle on top side on the belt, live steam pipe connection to heat the water in the bottom chamber. or direct steam can be purged on the product if suitable to raw material water filter screen and overflow is provided for removingforeign particles. top covers with holding bars, side windows can beopened to easy maintenance and fast cleaning. steam control valve with pid controller for temperaturecontrolling. temp indicator with pt 100 sensor provided for belt speed controlling vfd provided feed and discharge chute of ss-304. drive through simplex chain and chain wheel electrical power: - 0.5 hp water pump & 0.5 hp gear box motor: hindustan/equivalent make, gearbox: bonfiglioli / equivalent make. m.o.c :- s.s 304note: 1. manufacture should ensure that, the amla should not be damaged during blanching process 2. overall dimensions and motor power ratings may vary depending on the manufacturer design and site conditions.blanching tank :semi -automatic operationsuitable for

Central Government And Public Sector

CTN :39802186

23 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For supply of wiper assembly complete with motor with water spraying arrangement as per clw spe c. no clw/ms/3/050, ait-6 and clw drg. 1209-08-032-023. as per drg.no. - [ warranty period: 30 m onths after the date of delivery ]

Central Government / Public Sector

CTN :39803030

17 Apr, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of full cone spray nozzles rated 4.0 lpm @2.75kg/cm2. each nozzle shall be equipped with a stamped adjustable ball fitting part #36275 -1/4 x 1/4 brass & 1/4tt plus tg-6.5 of m/s. spraying sy stems(india) pvt. ltd. make or similar nozzle of other make as per rdso drg. no. skel - 5024(alt - 0) sheet 4 of 6. w.r.t. rdso smi no. rdso/2017/el/smi/0315(rev. 0) dt: 03.10.2017 for loco body washing & cleanin g plant cum rain water leakage testing plant. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39801210

24 Mar, 2025 NA

Multi City - Bihar

Tender For in all - 29 wards of nagar parishad araria, (i). cleaning and sweeping of main roads, all gullies under municipal area. (ii).periodic cleaning of drainage to maintain uninterrupted water flow. (iii). disposal of dead animal carcass. (iv) spraying of chuna and bleaching in municipal area as and when required. (v).periodic cleaning of toilet, urinal and municipal council properties. (vi).any other work assigned by office from time to time shall be carried out by the agency.

CTN :39740241

07 Apr, 2025 1.76 Crore

Karnal - Haryana

Tender For strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb - [10.33.1]providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1. 1:4 (1 cement : 4 coarse sand) [through rate], [10.8]providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [through rate], [11.25.2]pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 2. raised and cut pointing [through rate], [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [through rate], [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [through rate], [11.61.1]white washing with lime to give an even shade : 1. new work (three or more coats) [through rate], [14.23.1]cement pointing 1:2 on lining 1. in bed. [through rate], [17.15.1]granular sub-base with coarse graded material - grading-i or ii or iii (table:- 400-2) construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of mortandh specifications 1. grading i material [through rate], [17.22.2]water bound macadam gr i 2. water bound macadam grading i with screening type a providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.23.2]water bound macadam grading - ii 2. water bound macadam (53mm to 22.4 mm)grading ii with screenings type b (11.2 mm aggregates) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.25.1]prime coat @ 0.85kg per sqm 1. prime coat @ 0.60kg per sqm providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of mort&h specifications [through rate], [17.26.2]tack coat 2. providing and applying tack coat with penetration grade bitumen vg - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of mort&h specifications [through rate], [17.33.1]open - graded premix surfacing 20 mm thickness 1. providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder vg - 10 @ 1.46 kg per sqm, laid with paver finisher mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of mort&h specifications. [through rate], [17.36.3]seal coat 3. type b with vg - 10 bituminous binder providi

Central Government/Public Sector

CTN :39754338

28 Mar, 2025 22.62 Lacs

Wani - Maharashtra

Tender For providing of facility management services - lumpsum based - spraying of water by truck mounted water tanker of 12kl capacity for dust suppression at kolarpimpri ocm under kpppg sub area of wna; o&m of mechanical work; consumables to be provided by service provi..

CTN :39715502

08 Apr, 2025 NA

Howrah - West Bengal

Tender For supply of wiper assly.complete with motor with water spraying arrgt.as per clws specn.no. clw/ms/ 3/050 alt-6 and 1209-08.032-023. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39718265

07 Apr, 2025 NA

Kazipet - Telangana

Tender For supply of wiper assly. complete with motor with water spraying arrgt. as per clws sp ecn.no. clw/ms/3/050 alt-6 and drawing no.1209-08.032-023. [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :39697720

31 Mar, 2025 1.57 Crore

Angul - Odisha

Tender For providing of custom bid for services - spraying of water for dust suppression through water tanker around stock no1 washery stock via chp front to kalimandir handidhua local sale road inside out side connecting road from handidhua local sale exit point to coal c..

Burial Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector