Latest burning shed Tenders | Government burning shed Tenders

CTN :39051865

03 Mar, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of woolen and polyester yarn worsted of various compositions counts and shades for government woollen mills bemina

State Government

CTN :39340889

05 Mar, 2025 5.00 Lacs

Baramulla - Jammu And Kashmir

Tender For annual maintainence of assets including wages outsourced through stage contract. - providing and fixing orginal raitwood penalling ,including 12mm ply backing, complete with necessary screws complete job as per the directions of engineer in charge., providing and fixing kd kanas (2.5x1.5) with necessary screws complete job as per the directions of engineer in charge., providing and fixing specified board medium density exterior grade (grade i) to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately) : pre-laminated with decorative lamination on both sides mdf board conforming to is:14587 18 mm, providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.in all colours, shades, except white, ivory, fume red brown, p/f 10 litres without fittings low level cistern (vitreous china), providing and fixing 50 litre geyser along with connection pipes and all neccasry fittings (venus, jaquar,racold ), providing and fixing 15 mm nominal bore c.p. brass bib cock of approved quality conforming to is : 8931, providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931, providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls whereverrequired.18.10.1 white glazed fire clay kitchen sink of size 600x450x250 mm, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge. 19.3.1 internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 19.3.1.1 15mm nominal outer dia pipes., providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank

Corporations And Associations And Others

CTN :39422929

13 Mar, 2025 51.44 Crore

Panchkula - Haryana

Tender For online tender for the rate contract for the supply of dental items to various hospitals of government of haryana for a period of two years for group c - cotton rolls ( small, pkt of 1000 pcs), disposable patient drape sheet 1*1mm, gum paint based on tannic acid, potassium iodide, zinc chloride, glycerine with thymol/ menthol /cetrimide, liquid 15 ml bottle, hybrid composite resin for anteriors (all shades), high strength, long lasting wear resitance, great handling without stick, 4 gm isi/ iso/ce/marked., rubber dam kit adult, box of 152*152 mm, medium rubber dam sheets, 152 mm template, 152 mm plastic dental dam frame, 6-11 clamps pack with clamp holder, rubber dam clamp forcep, rubber dam punch mdr/isi/iso/ce marked, glass ionomer cement- type-ix, high strenth for posterior teeth, chemical setting without shrinkage, strontium based, high flouride releasing, 12 to 15 gm powder and 5 to 10 gm liquid, mdr/isi/iso/ce marked, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel. shade :- pale yellow, shade :- pale yellow, mdr/isi/iso/ce certified /usfda, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel., shade :- yellow brown, mdr/isi/iso/ce certified /usfda, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel., shade :- dark grey, mdr/isi/iso/ce certified /usfda, disposable suction tips pkt of 100, mineral trioxide aggregate mdr/isi/ iso/ce/marked., silver alloy non gamma-2 lathe cut alloy, 30 gm vial mdr/isi/iso/ce marked, niti hand files (21 mm) size- 15-40, for curved canals, pkt. of six mdr/isi/iso/ ce marked, pit & fissure sealant ( 6 ml bottle) solution with high flouride releasing, low viscocity, high retention, rapid cure & low solubility. mdr/isi/iso/ce marked/usfda, preadjusted edgewise stainless steel bracket kit containing upper and lower 2nd premolar to 2nd premolar bondable brackets with upper triple and lower double weldable molar tubes and mbt 0.022 prescription, fiber- reinforced splinting material- bondable reinforced ribben fiber-approx 2mm width mdr/isi/ iso/ce/marked., niti rotary files 4% 21mm (pkt. of 6). refill packs of #15,#20,#25,#30,#35,#40 (size to be specified at the time of order), addition silicone impression material (600 ml putty with 2 cartridges of 50 ml light body), air rotor spray isi/iso/ce marked, calcium hydroxide, paste system based and catalyst -radiopaque, 4 gm mdr/isi/iso/ce marked, acidulated phosphate fluoride gel 1.25%(apf), gic luting pkt. of 30-35gm powder, flowable composite 2-4 grams, x-ray processing solution(set of developer & fixer powder, manual, to make 13.5 ltr solution), root canal spreaders pkt. of 6 #15-40 21mm, dental chair covering sterilized cling foil rolls mdr/isi/ iso/ce/marked., mta pkt. of 1gm, tooth preparation kit (set of 14 burs), root canal k files 21mm (pkt. of 6) #15-40, dental amalgam capsules pkt. of 50 capsules, impression compound, gic restorative pkt. of 10-15 gm powder, bleaching kit, diamond burs- various shapes including round, tapered round, flat fissure, pear (size and shape of burs required will be specified at the time of order)- coarse / fine grit. pkt of 5, niti rotary files 4% 25mm (pkt. of 6). refill packs of #15,#20,#25,#30,#35,#40 (size to be specified at the

CTN :39424651

25 Feb, 2025 NA

Kangra - Himachal Pradesh

Tender For procurement of med stores - hydrogen peroxide solution with stabiliser ip (20 volume) 500 ml bott, hydrocortisone enema 10%, 20.8 gm, bisacodyl 5 mg tab, ethinyl estradiol 0.035mg + cyproterone acetate 2mg pack of 21 tab, salmeterol 25 mcg + fluticasone 125 mg mdi , 120 doses, hydroxyprogesterone caproate 500 mg/2 ml (amp of 2 ml) inj, ferric hydroxide sucrose complex 20 mg in 5ml for injection, choline salicylate and benzalkonium chloride gel of 10 ml, collagen with medicaments, pack of 1 gm (nomextn-collagen with furacilin and boric acid, antiseptic pack of one gm), amiodarone hcl 150 mg, 3 ml inj, isotretinoin 20 mg cap, zolmitriptan nasal spray 5mg, 7 metered doses, alloplastic bone graft substitute 0.5-1 cc bioactive glass ceramic, dental nano composite restorative kit photo cure complete with dual shades for dentine & enamel with translucent shade consisting of 6 syringes of 3.5-4 gm each with etchant and bonding., crown preparation kit containing 14-15 multilayered diamond titanium nitride coated tips/points., flowable light-cure composite kit complete of four syringes of 2-4 gm each with etchant and bonding, midazolam nasal spray 0.5 mg/spray 5 ml bottle, set of six hand niti tapered files 21mm length with corresponding gutta percha points and paper points-complete kit, set of six hand niti tapered files 25mm length with corresponding gutta percha points and paper points-complete kit, 10% povidone iodine solution, u.s.p equivalent to 1% available iodine 500ml bott

Corporations And Associations And Others

CTN :39436338

27 Feb, 2025 9.68 Lacs

Delhi - Delhi

Tender For improvement/repair of old rooms of store/sk shelter at gk-1 drain in b block, gk 1 by plastering, painting, wooden work, m.s steel-work, fibre shades, door and window repairs, aluminium work, plumbing work, distempering and water-proofing treatment

State Government

CTN :39439278

06 Mar, 2025 3.99 Lacs

Ujjain - Madhya Pradesh

Tender For shifting of shades construction of m.s. sheet room at division and store dist. ujjain

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

State Government

CTN :39359518

08 Mar, 2025 NA

Daman - Gujarat

Tender For purchase of dental materials for chc moti daman under department of health and family welfare dnh dd - dental materials, diamond bur br- 41 [1pkt= 5 nos], diamond bur br- 42 [1pkt= 5 nos], diamond bur br- 45 [1pkt= 5 nos], diamond bur sf- 11 [1pkt= 5 nos], diamond bur si- 47 [1pkt= 5 nos], diamond bur tr- 12 [1pkt= 5 nos], glass inomer luting cement type 1, glass inomer cement type 2, radiopaque high strength posterior glass ionomer restorative cement {type 9}, glass inomer light cure cement, radiopaque silver alloy glass ionomer restorative cement powder [miracle mix], pit & fissure sealant, tetric n bond universal 6gm, carbamide peroxide lubricating edta paste 3g (rc help), calcium hydroxide with iodoform (1 box of 2 syringe of 2.2gm/ disposable tip 20ea) [metaplex] metapex plus 4.4, calcium hydroxide paste 2g (rc cal)/ intracanal dressing paste, root canal sealing materials tube paste a 4ml/ tube paste b 4ml/ 1 mixing pad [ah plus], composite polishing kit {pre polishers+gloss polishers+high gloss polishers}, prophylactic polishing paste 10gm, temperory filling materials 40gm(orafil g), protaper endofiles 25mm sx-f3[s1,s2,f1,f2,f3,sx], protaper endofiles 25mm f1, protaper endofiles 21 mm f1, short barbed broaches 21mm 2-4 [1 pkt= 6pcs ], k file no.15 21mm (1x6 pic/pkt), k files no.15-40 21mm (1x6 pic/pkt), flowable light cure composite filling shade a2, light cure composite restoration shades a1, light cure composite restoration shades a2, light cure composite restoration shades a3, light cure composite restoration shades a3.5, light cure composite restoration shades b2, light cure composite restoration shades b1, gutta percha points iso colour coded no- 15 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 15-40 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 20 (1 pkt of 120 pcs), gutta percha points iso colour coded no- 25 (1 pkt of 120 pcs), gutta percha points (2%) iso color coded no.30 (1 pkt of pcs), gutta percha points (2%) iso color coded no.35 (1 pkt of pcs), gutta percha points (2%) iso color coded no.40 (1 pkt of pcs), gutta percha points (2%) iso color coded no.45 (1 pkt of 120 pcs), bond applicator tips (1x100), rvg sleeves medium {1pkt = 500}, sodium hypochloride 5% 500ml, polishing brush /cup {1pkt=5 pcs}

Central Government/Public Sector

CTN :39359778

27 Feb, 2025 44.86 Lacs

Sidhi - Madhya Pradesh

Tender For transportation, treatment and disposal/recycling of category 5.2 hazardous waste (wastes or residues containing oil) from the hazardous waste storage shades at old and new workshops of nigahi project

Burning Shed Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors