Latest burst test chamber Tenders | Government burst test chamber Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38568000

30 Dec, 2024 NA

Ratlam - Madhya Pradesh

Tender For supply of magnetic particle inspection accessories : (1) yoke dead weight : 18.1 kg for dc with oem cal ibration certificate. (2) astm test block with oem calibration certificate. [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :38307202

19 Dec, 2024 NA

Goa - Goa

Tender For corrigendum : supply of one complete unit of shipboard incinerator approx. 180 000 to 200 00 kcal per hr capacity with all accessories alarms or instrumentations required for fitment and successful operation onboard. , tools multimeter , tools set of spanners , tools allen key , tools cutting plier , tools screw driver , binding drawings manuals and documents for installation test and trail , as made drawings manuals and documents for handing over the commissioning , on board spares required for 2 years of maintenance price break up to be provided in pdf file , inspection and test certificate fat report duly signed by inspecting authority and report of weighed weight material test and guarantee certificate , installation and commissioning spares price break up to be provided in pdf file , service engineer charges , training

CTN :38513583

30 Dec, 2024 NA

Lucknow - Uttar Pradesh

Tender For the supply of veterinary equipments/machineries and instruments to the department of animal husbandry, govt. of up - name of equipment/instruments & specifications, automatic vaccinator bottle and vial attachment, pressure dose adjustment from 0.5ml to 5ml, luer lock needle nozzle with spare service kit., california mastitis test kit complete kit made of polypropylene with 4 mixing chambers and full grip handle including reagent, reagent dispenser and test colour standard chart, cattle crush tubular, made of g.i. pipe with outside diameter 60mm, height of front & back pillar 1980 mm, length & breadth of cattle crush be 1830 x 877 mm respectively. all four pillars should be provided holes at 75mm distance from bottom and be provided with round bars of 12mm diameter & 300 mm long, side pillars be joined by 2 tubular beams having 60 mm outside diameter, the insided distance between the two beams being 477 mm. the two sides of beams should be supported by two g.i. pipers of 48 mm diameter. lower side beam at 1223 mm height and upper side beam at 1700 mm height. circular 1 inch painted marking on all four pillars at the height of 450mm from below to indicate ground fill / fixation. cattle crush should also be provided with an adjustable gate to open sides. gate should consist one sliding g.i. pipe on two horizontal pipe of 60mm outer diameter to secure the neck of animal. two extra g.i. pipe 1.2 mtr. long of 60mm outer diameter should be provided for the backsides. two metalic loops on each side vertical rear pillar to control cattle from backside be provided. all the g.i. pipes used should be of isi mark a class with visible isi mark on every meter of pipe. all the joints should be electrically welded. (note-weight of the cattle crush should comply with the norms of the isi mark, a class gi pipe standard of specified diameters with variable maximum/minimum permissible limits)., chuck with key (orthopaedic) s.s. -304, 20cm, dehorning saw with detachable blades 45 cm, dog muzzels -standard, dressing forceps (s.s.-304) 25cm, dressing forceps (s.s.-304) 15cm, electric dehorner 30 cm length, portable electric sterilizer (ss 304), 30cmx15cmx20cm-1500 watt, enema pump (veterinary) reedis standard, firing iron set (conical,line,pin), forceps s.s. -304 15cm, forceps s.s. -304 17.5cm, forceps s.s. -304 20cm, formalin chamber with 100 formalin tablets non corrosive,standard, 20"x 8"x 8", gerlach/ buhner vulva suture instrument ss -304,18 cm, grays mouth gags for dogs ss-304, 11cm, grays mouth gags for dogs ss-304, 14cm, grays mouth gags for dogs ss-304, 16cm, haver sac bag 18"ht. x18"length x6" width, hog catcher standard, instrument tray s.s. -304with lid 250mmx300mm, instrument tray s.s. -304with lid 350mmx300mm, intra medullary bone pins assorted size, long forcep (ss-304) 45 cm, metal catheter for bitch standard, mouth gag for cattle standard, ointment slab porcelain 20 cmx20 cm, operation table for small animals-1- operation table for small animals suitable for general surgery ss hydraulic o.t. table, five section ss top and heavy base and column. all sections covered with mattresses. height adjustable range ( in mm ): 75mm to 1000mm, trendelenburg: 30 degree, max. load 120 kg , table lenght 1830mm, table width 497mm, height adjustable, back rest up 80 degree/dowm 25 degree, lateral tilt 20/20 degree , head rest up 20 degree/down 60 degree, trendelenburg reverse 25 degree, orthopedic saw, (ss-304) 30 cm with adjustable blades, otoscope and opthalmoscope set otoscope and opthalmoscope set of good quality and for veterinary use. it should be batteries operated and easy to handle, otoscope head with 4x magnification, 3 specula of size 80mmx6mm, 58mmx5mm, 80mmx4mm with one spare bulb, one opthalmoscope head., plaster cutting saw s.s. 4cm wide 20 cm., post mortem kit for poultry-scissors mayos ss, 20cm-2, scissors mayos ss, 15cm-2, long forceps ss 20cm-2, magnifying glass, 6cm dia-2, bone cutter ss, 20cm-1, b.p. handle ss, no

CTN :38320086

18 Dec, 2024 NA

Bangalore - Karnataka

Tender For corrigendum : supply of cathodic protection on arc basis for 2 years - excavation and backfilling size 1 c x 16 sq mm , r1 cable jointing repairing of underground cable as per approved procedure including excavation and backfilling size 1 c x 25 sq mm , r1 cable jointing repairing of underground cable as per approved procedure including excavation and backfilling size 1 c x 35 sq mm , r1 making of pipe to cable connection , r1 painting of manual test station including removing of old paint rust etc , r1 painting of anode lead junction box , r1 painting of tr cppsm units including removing of old paint rust etc , r1 supply and replacement of copper copper sulphate permanent refrenece cells , r1 supply of portable cu cuso4 half cell for measuring of psp pipe to soil potential of pipeline , r1 supply and installation of explosion proof spark gap arrestors make across insulating joints at drs mrs etc , r1 supply installation and commissioning of polarization cell along with the enclosure suitable for housing of polarization cells , r1 preventive maintenence of polarisation cells , r1 supply and installation of pre packed magnesium anodes with cable having weight 17 pounds , r1 supply and installation of pre packed zinc grounding cell 22kg htype , r1 supply and installation of pre packed zinc grounding anode weight 17 lbs , r1 preventive maintenance of anode ground bed , r1 sitc of earthpits , r1 halfyearly monitoring of earthpits , r1 recharging of existing earth pits , r1 chamber repair of earth pit , r1 earthpit chamber ms cover thickness , r1 supply and installation of cable markers , r1 carrying out on off close interval potential logging , r1 carryingout direct current voltage gradient , r1 stray current interference survey at railway crossing or runnig parallel to gail gas pipelines , r1 stary current interference survey at foreign pipeline crossing or runnig parallel with gail gas pipeline , r1 stray current interference survey at ht crossings or runnig parallel to gail gas pipelines , r1 excavation and backfilling of pipeline in all type of soils and ordinary rocks , r1 coating repair removing the old damaged coating rust greese moisture and all foreign material at defect material with scrapper , r1 cat survey of un piggable pipelines at every 10m interval , r1 supply installation and commissioning of earth pits , r1 supply installation and commissioning of maintenance free earth pits , r1 supply and laying or erection of 25 mm x 3 mm gistrip upto half metre below ground , r1 supply and laying or erection of 50 mm x 6 mm gistrip upto half metre below ground , r1 supplying and coating of r95 , r1 breaking of rcc surface for the construction of earth pits etc , r1 breaking of pcc surface for the construction of earth pits etc , r2 supply and installation of manual test station complete with lower bend and with pcc foundation , r2 supply and installation of manual test station with out lower bend and with out pcc foundation , r2 shifting of manual test station along with foundation and cable to suitable location as per instruction of eic , r2 repairing of manual test stations foundation with supply and replacement of foundation bolts and nuts , r2 repairing of manual test stations including supply and replacement of damaged door , r2 supply and replacement of damaged or missing locks in manual test station including labor consumables tools and tackles , r2 supply and replacement of damaged or missing doors in manual test station , r2 supply and installation of damaged missing terminal plates all types , r2 supply and fixing of diagram plate in the existing test station of all types complete in all respect , r2 supply installation testing and commissioning of anode lead junction box , r2 repairing of bid details/ 2 / 93 aljb including supply of new locks and latch for the outer enclosure , r2 supply of 1c x 4 sqmm , r2 supply of 1c x 6 sqmm , r2 supply of 1c x 10 sqmm , r2 supply of 1c x 16 sqmm , r2 supply of 1c x 25 sqmm , r

Central Government / Public Sector

CTN :38525255

24 Dec, 2024 NA

Multi City - Multi State

Tender For supply of 4-legged wire rope slings as per following specification (drawing attached)wire rope dia 16mm, both side double crimpinglength thimble end to thimble end 2750mm,both end with thimble of 18mm openingwith one end eye foundary hook of opening with 86 to 93 mm,working load 5.3 to 5.45 ton, weight 2.4 to 3 kg, material g 80, and other end to be connected in muster oval ring grade 100, capacity 10 ton, size 27 mm x 180 mm x 100 mm.make: safe lift, simplex or spanset or any other reputed brand, (with test certificate from state or cent. govt. authorized laboratories).

corporations/Associations/Others

CTN :38100333

21 Dec, 2024 5.07 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : supply of various items of disaster management and electrical safety for atp, anpara - rotary rescue saw for fire wing s disaster management equipment, chain saw for fire wing s disaster management equipment, chipping hammer for fire wing s disaster management equipment, search and rescue light for fire wing s disaster management equipment, stretcher for fire wing s disaster management equipment, braided rescue rope for fire wing s disaster management equipment, fire retardant dungaree for cisf fire unit, as per attached specification, electrical safety shoes, size-7 uk, safety standard: ansi z41 & astm 2412-05, material: leather/pu/tpu/eva, wedge sole, steel toe cap, anti-static inner sole, electrical shock resistance up to 11kv for 1 minute., electrical safety shoes, size-8 uk, safety standard: ansi z41 & astm 2412-05, material: leather/pu/tpu/eva, wedge sole, steel toe cap, anti-static inner sole, electrical shock resistance up to 11kv for 1 minute., electrical safety shoes, size-9 uk, safety standard: ansi z41 & astm 2412-05, material: leather/pu/tpu/eva, wedge sole, steel toe cap, anti-static inner sole, electrical shock resistance up to 11kv for 1 minute., electrical safety insulated hand gloves, size m, type of material-rubber, test voltage 12kv for 1 min, min. length-14 inch, leakage current 1ma/kv, electrical safety insulated hand gloves, size m, type of material-rubber, test voltage 36kv for 1 min, min. length-14 inch, leakage current 1ma/kv, industrial safety helmet, safety standards: iso 3873:1977 & en 397, industrial safety belt with harness full body fall protection with scaffolding hook double lanyard, minimum weight capacity: 100kg, standards: is 3521 (1999), electrical rubber mats sheet, size: 1meter x 2meter x 3mm, min. insulation resistance voltage: 1kv, standards: is 15652:2006

Central Government/Public Sector

CTN :38505902

23 Jan, 2025 NA

Noida - Uttar Pradesh

Tender For e-procurement of laboratory equipment (bitumen) and fwd for material testing laboratory of iahe - bitumen/emulsion/cutback/ bituminous mixes, absolute viscosity& kinematic viscosity(i) cannon manning vacuums viscometer-2 no. (ii) cannon fenske viscometer-2 no. (iii) thermometer- 1 no. (iv) bath- 1 no. (v)vacuum system-1 no. (vi) timing device-1 no., industrial viscositytar viscometer with set of equipments, rolling thin film oven (rtfot), particle charge tester, mastic asphalt hardness test mastic asphalt hardness tester, resilient modulus of bituminous mixtures, theoretical maximum specific gravity(i) vacuum bowls (ii) vacuum flask for weighing in air only (iii)deleted (iv) 3 vacuum pump or water aspirator (v) residual pressure manometer or calibrated absolutepressure gage (vi) thermometers (vii) water bath (viii) bleeder valve (ix) mechanical agitation device, bitumen content by ignition method1. asphalt content tester, bitumen laboratory mixer (20 liters), dynamic shear rheometer test system, pavement, structural evaluation of pavementfalling weight deflectometer

State Government

CTN :38458807

20 Dec, 2024 95.00 Lacs

Chennai - Tamil Nadu

Tender For supply and installation of sports science equipment for khelo india state centre of excellence chennai - anthropometry, anthropometric set, sit and reach test box, skin-fold callipers, height-weight and bmi, digital grip dynamometer, nutrition:body composition analyzer (compact size field model), gtmt, broad jump mat, vertical jump assessment device (vertec), swiss balls (in set), modified pull-up fitness system, force plate -3d, fms kit, y-balance kit, speed gates (fusion sports), physiology, rowing ergo meter (concept2), cycle ergo meter, podiatry full kit, lactate analyzer, psychology, depth perception apparatus, two arm coordination test, peripheral vision tester, audio visual reaction time apparatus, physiotherapy, combination therapy (ultrasound therapy + electrotherapy), ultrasound, portable laser therapy system, treatment couches, emg bio feed back, tens unit, interferential therapy unit, theraband, exercise/swiss ball (size 55cm), exercise/swiss ball (size 65cm), exercise/swiss ball (size 75 cm), rehab work station (upper- extremity), performance training/rehab station, cryo ultrasound unit

Central Government / Public Sector

CTN :38339492

18 Dec, 2024 139.30 Crore

Bangalore - Karnataka

Tender For design, supply, installation, commissioning, training of various type of equipments for esdm (electronic system design and manufacturing) of msme training centers located at greater noida, bengaluru, puducherry and idemi mumbai on turnkey basis - decade resistance box , ct/pt calibration system , multifunction calibrator , decade capacitance box , ct analyzer , standard resistors , standard weights (el class) , pippete calibration system , low temperature bath (-80 to ambient degree temperature) , frequency counter , energy meter test system (3 position) , precision temperature stabilised resistance standard (high) , decade inductor box , precision temperature stabilised resistance standard (low) , sound level calibrator , digital power analyser , decade resistance box (4 nos.) , process calibrator , hv divider , decade mega ohm box , standard weights (e2 class) , 6 and half dmm , temperature indicator , time interval meter , temperature indicator with compensation , standard weights (f1 class) , semi-micro balance (upto 200 gms) , tachometer calibrator , standard thermocouple (type s) without compensation , sound level analyzer , standard platinum resistance temperature (prt) detector , precision balance (upto 6.1 kg) , thermo-couple calibartion furnace (300 to 1100 degree temperature) , lcr bridge , humidity measurement probe , dry block calibrator (ambient to 600 degree temperature) , anechoic chamber with radiated susceptbility and radiated emission test system , alltitude test chamber , compact emc tester , environmental chamber , digital pressure controller (dead weight pressure tester) , line impedance stablizing network , harmonics/flicker measurement test system , impulse generator , rf shielded chamber , vibration plus environmental chamber , three phase regulated variable power source , humidity generator, relative humidity , bump/shock test system , heat deflection temperature test set , vibration test system , electronic load , conducted rf immunity simulator , rohs testing lab - inductively coupled plasma optical emission spectrometer (icp-oes) , thermal shock chamber , ac dc current source , ultra precision capacitance bridge , esd simulator , horizontaland verticlal flame chamber , rohs testing lab - energy dispersive x-ray fluorescence spectrometer (edxrf) , single phase regulated variable power source , precision energy standard , rohs testing lab - gas chromatograph mass spectrometer (gc-ms) , ingress of water test system - i set , rohs testing lab - ion- chromatograph (ic) , needle flametest chamber , salt spray chamber , dust chamber , digital storage oscilloscope , defibrillator proof test set , thermostat endurance test set , flexing test apparatus , electrical safety tester , winding resistance meter , temperature recorder , radiation meter , tracking test apparatus , gas detector , cord anchorage test set , digital multimeter (handheld/desktop) , glow wire test apparatus

Burst Test Chamber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors