Latest cable jointing kit Tenders | Government cable jointing kit Tenders

CTN :43531642

16 Jan, 2026 NA

Multi City - Multi State

Tender For supply of 160 sq.mm annealed copper stranded jumper wires. as per rdso spec: ti/spc/ohe/jmp/0941or latest. or any core/rdso approved [ warranty period: 30 months after the date of delivery ]

CTN :43531807

28 Jan, 2026 NA

Multi City - Multi State

Tender For supply of short pfn nail- 01 in number in each set. the short pfn nail should be available in length 180 mm/ 200 mm and in diameter ranging from 9mm to 12mm. should have tri wire technology (3 wires in 3 different direction emerging from lag screw) to take hold in subchondral bone for rotational stability. the nail should have 4 degree to 6 degree medio lateral angle, should have lag screw angle of 125 degree /130 degree/ 135 degree , to be placed with a single zig/ aimimg guide. the nail should have option of distal dynamic and static locking. lag screw - 01 in number in each set. 4.9 mm interlocking screws - 2 in numbers in each set end caps of different lengths for holding the lag screw to prevent back out - 01 in number in each set. ]

State Government

CTN :43530401

26 Jan, 2026 NA

Multi City - Multi State

Tender For supply of mbt brackets size 022 mesh base medium size brackets color coded power arm on canine and pre molars complete kit,performed rectangular stainless wires 019 x 025 upper avoid arch form pack of 10 upper wires,performed rectangular stainless wires 019 x 025 lower avoid arch form pack of 10 lower,super elastic round nickel titanium arch wire 016 upper avoid arch form pack of 10 upper transition temp 32 to 35,super elastic round nickel titanium arch wire 016 lower avoid arch form pack of 10 lower transition temp 32 to 35,super elastic round n1t1 wires 017 x 025 upper avoid arch form pack of 10 upper transition temp 32 to 35,super elastic round n1t1 wires 017 x 025 lower ovoid arch form pack of 10 lower transition temp 32 to 35,super elastic round n1t1 wires 019 x 025 lower avoid arch form pack of 10 lower wires transition,super elastic round n1t1 wires 019 x 025 upper avoid arch form pack of 10 upper wires transition,bondable buccal tubes 1st molar upper double lower double roth 018 camas 022 mbt 018 camma 022,bond

State Government

CTN :43530726

31 Jan, 2026 NA

Multi City - Multi State

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786

State Government

CTN :43472850

14 Jan, 2026 2.60 Lacs

Kasargode - Kerala

Tender For supply of tools, diagnostic devices,workshop equipments, spare parts to farm machinery clinic, kasaragod. (annual plan 2025-26- support to farm mechanization) - supply of tools/ diagnostic devices/ workshop equipments/ spare parts, mechanic tool setsupplying a comprehensive professional-grade the mechanics tool kit with a durable, impact-resistant moulded suitcase (bmc case) with designated compartments for each component, ensuring easy portability and organization and includes the chrome-vanadium tools and accessories listed as appendix 1all sockets, spanners, and ratchets shall be made from chrome vanadium steel (cr-v), heat-treated, and chrome-plated for corrosion resistance. screwdriver bits shall be of s2 alloy steel for high torque resistance. ratchets shall have a minimum of 45 teeth with a quick-release and reversible mechanism. all tools shall conform to din / iso standards or equivalent. suitcase colour should be standard industrial colour (black / blue / grey or similar), locking plier (vice grip type) 10" with drop-forged steel jaws with heat-treated teeth for firm gripping, include an adjustable screw and quick-release lever, nickel-plated surface for corrosion protection., diagonal cutting pliers, 6", made of forged alloy steel, with induction-hardened cutting edges and insulated handles suitable for cutting wires and small metal parts., long nose plier 6" made of forged alloy steel with slim tapered jaws for precision gripping and cutting in confined spaces, 6" overall length, with insulated handles., long nose plier 8" made of forged alloy steel with slim tapered jaws for precision gripping and cutting in confined spaces, 8" overall length, with insulated handles., adjustable pipe wrench suitable for gripping pipes up to 40 mm diameter made of cast iron body with drop-forged steel jaws, serrated and induction-hardened and handle painted or powder-coated., adjustable pipe wrench suitable for gripping pipes up to 75 mm diameter made of cast iron body with drop-forged steel jaws, serrated and induction-hardened and handle painted or powder-coated., heavy-duty pipe wrench with jaw opening up to 110 mm made of forged alloy steel, precision-machined teeth for firm grip, designed for mechanical and plumbing use., medium-duty filter wrench with adjustable steel band and handle, suitable for medium-sized oil filters. chrome-plated finish with non-slip grip., ball pein hammer with 300 gm forged steel head, hardened and tempered. fitted with a strong fiberglass handle suitable for riveting, striking, and metal forming., soft face hammer with dual rubber striking faces to prevent surface damage. head weight approx. 300 500 gm, handle made of fiberglass, steel wedges, hardened and ground, used for splitting or aligning. made of forged alloy steel with a rust-resistant finish 230 mm length 1.5 kg., adjustable torque wrench with working range 25 135 nm. drive size 3/8" or 1/2", accuracy 4% of indicated value with reversible ratchet and quick-release mechanism., heavy-duty adjustable torque wrench, range 70 340 nm. 1/2" drive, accuracy 4%, chrome vanadium construction with calibration certificate., high-capacity torque wrench, range 135 540 nm. 3/4" drive, accuracy 4%, knurled handle for non-slip grip, supplied with protective case and calibration certificate., steel scale set (5 nos) made of high-quality tempered stainless steel with etched and permanently engraved graduations in both metric (mm/cm) and inch units. straight, with accurately ground edges and smooth surfaces, graduation accuracy shall conform to is 1481:1970 or equivalent. lengths : 150 mm, 300 mm, 600 mm, 450 mm, 1000 mm. each scale shall have clear visibility markings and corrosion-resistant satin chrome finish., vernier calipers made of stainless steel, precision-ground and finished, with a measuring range of 0 200 mm and least count 0.02 mm / 0.001 inch capable of internal, external, depth, and step measurements. vernier scale and main scale markings shall

CTN :43527505

21 Jan, 2026 10.00 Lacs

Mathura - Uttar Pradesh

Tender For supply of various size heat shrinkable cable jointing kit and straight through for 33 kv, 11 kv, lt xlpe cable under the jurisdiction of se, eudc, mathura

CTN :43522575

19 Jan, 2026 NA

Jodhpur - Rajasthan

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

State Government

CTN :43395003

01 Jan, 2026 37.00 Lacs

Begusarai - Bihar

Tender For corrigendum : rfp for supply of machines and equipments for mechanical & civil engineering lab at rashtrakavi ramdhari singh dinkar college of engineering (rrsdce), begusarai - model of cochran boiler with accessosries & mounting, model of babcock & wilcox boiler with accessosries & mounting, manufacturing technology lab, slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, vernier calliper, vernier calliper 300 mm, inside vernier calliper 150 mm, vernier gear tooth caliper (0.02mm resolution, mi-26), micrometer, micrometer outside 0-25mm, inside micrometer 25mm, gear tooth micrometer (25mm, 0.01mm least count with interchangable ball anvil/spindle tip type), sine bar complete set (a) sine bar (200mm. hardened tool steel), sine centre complete set sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), steel scale, steel scale (150mm), steel scale (300mm), steel scale (1000mm), surface plate with stand • surface plate size: 12"x12"x4" • material: black granite, stand size: 36 inch, lathe tool dynamometer x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ) y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording signal conditioner : gpds signal conditioner accuracy = ± 0.5 % computer with window operating system software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation. software features are : (a) digital display of forces (b) graphical display of forces (c) data recording, printing, transfer to ms excel dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer axial load capacity: 500kgf. torsional load capacity 50 kf. cm. software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation software features are : (a) digital display of forces (b) graphical display of forces (c) data recording. printing, transfer to ms excel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", talysurf / surftest • detector measuring force: 0.75 mn • stylus tip angle: 60o stylus tip radius: 2 micrometer • measuring method: induction method • stylus: diamond tip • skid radius: 40 mm • sampling length (l): 0.08 mm, 0.25 mm, 0.8 mm, 2.5mm, 8mm or input • no. of sampling length (l): x1, x3, x5, it is having interface for input and out and have display to show primary profile, roughness profile, autocollimator • telescope magnification: 38x • objective: f=700mm • effective aperture: 70mm • measuring range: 30 minutes of arc (both vertical and horizontal axis) • minimum reading: 0.5 seconds of arc • readout system: adjustment in view field and reading on micrometer • measuring accuracy: 0.5 seconds of arc within a range of 5 minutes arc, 1 second of arc within a range of 30 minutes of arc • light source: led, two wire & three wire thread measuring instrument two wire & thread measuring instrument : micrometer range from 0- 25 mm, least count : 0.001mm, 18 set of wires having diameter range: 0.17 – 3.2 mm for micrometer spindle diameter of 6.35mm, dial indicator dial indicator: range: 50mm dial indicator dial indicator range : 50mm resolution. 0.01mm range per rev: 1mm seale, 0-100 accuracy : ±0.03mm measuring force : 3n or less stem diameter : 8mm contact point : carbide tipped horizontal type dial test indicator with

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept