Tender For corrigendum : e-tender for the open gym for women at malappuram - etender for the open gym for women at malappuramfor more details refer tender documents, leg press, shoulder builder, air walker, bench with fixed weight, chest cum seated puller, rower, leg extension, interlocking paver block :- providing and laying 60mm thick faciory made cement concrete interlocking paver block of m -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints withline sand etc. all complete as perthe direction of engineer-in-charge. (l 24m , w 3m), solid block :- solid block masonry using precast solidblocks(factory made) of size 40x20x15 or nearest available (kerb), cement plaster :- 12mm cement plaster of mix 1:4 (1cement:4 fine sand), cement concrete :- providing and laying in position specified grade of reinforced cement concrete (leg concrete), excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarsesand : 4 graded stoneaggregate 20 mm nominal size), granular sub base:- providing and laying granular sub base 25mm to 4.75mm, gravel stone aggregate of size 4.75 and down @10.0%, local finesand@18.0%
Tender For installation of children playing equipment/fountain at womens /children park kulgam (balance work). - (a) : civil work for (construction of fountain)earthwork in excavation by mechanical means for foundation, trencheing, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage, providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:2:4) mix including curing, carriage, but excluding form work. (circular bed), a) centering and shuttering including strutting, propping etc. complete including removal of form work.(below ground), b) centering and shuttering including strutting, propping etc. complete including removal of form work.(above ground), reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete., providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of eic., providing and laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to is 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 coarse sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of eic., (b): civil work for control panel (8x4)earthwork in excavation by manual means for foundation, trencheing, incl. getting out excavated earth and disposal of surplus excavated eath and includes dressing of sides and ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. compacting in foundation trenches and carriage includes backfilling., providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete.@50kg/cum., providing and fixing of class b medium duty g.l. pipe (100mm dia, 6mm thick) conforming to is 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the ms plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required., providing and fixing of flange plates (8x8) and 8mm thickness, including welding with gi pipes & drilling holes etc., providing and fixing of foundation bolts type "j" (m20x300)mm, including nuts and washers as required thereof. the job includes providing steel rods of appropriate size to fix bolts properly in concrete., structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by eic.qty @5kg/sft, providing and fixing of ismc:75 channel sections as per the site requirement and approved by eic. the job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by eic., providing and fixing coloured high rib corrugated g. s. sheet (18 swg) roofing including
Tender For b1/tender/2024-2025/mregs material supply - material items :, 0002-hire charges of concrete mixer 0.25 to 0.40 cum with hopper, 0012-vibrator(needle type 40mm), 0041-joint cutting machine with 2-3 blades, 0295-stone aggregate(singale size):20mm normal size, 0296-stone aggregate (singale size):12.2 mm nominal size, 0324-coal tar, portland cement, brass tower bol 250*10mm, brass 150mm floor door stopper(0.357 kg), oxidised mild steel sliding door boli 250*16mm, synthetic enamel paint, white cement, plastic emulsion paint, coarse sand (zone iv), fine sand, kota stone slab 20mm to 25 mm thick, teak wook in planks, watre proofing material, c i bracket for wash basin and sink, g.i pipes 25 mm dia, g i pipes 50 mm dia, vitreous china orrisa type w.c pan size 580 mm, floating glass sheet of 5.5 mm thick, display board/cib, conveyance, gst, all drive screw (for gypsum board), frosted glass sheet 4mm, flexible pvc waste pipe, aluminium t or l section, binding wirw, turpentine oil, ceramic tiles, metal primer, interlocking c.c paver block, quality control and survey, mr6203-bricks, stone ware pipe 150mm dia, steel tmt fe 500, rubble, hum prope, nylon/pvc gasket, cpcv pipe 15mm dia, plunber with tool kits, aggregate 40mm, socket brass for 32mm tap, soft murum, welder, all frame rail angle anodized, hold fast iron 300*40*5 mm, alluminium section, lock for sliding shutter, all bearing roller, structural steel, oil enamel paint, handle 150mm stainless steel(rounded shape), hinge stainless steel 125mm, steel primer, aldrop, sinc base oil paint, material coast rs.1 per unit, white glazed wash hand basin, pvc connector 15mm dia, steel centering for foundation, steel centering for columns/pillera, steel shuttering for lintel,beams,grider,plinth beam,cantilever, steel shutering for roof ,landing,balcony having 12.5 cm tk, electric vibrator, tiles cutting machine, water tank, stop tap brass with crunch wheel 15mm dia, piller tap 12mm dia chronimu plated heavy, surface vibrator, stoneaggregate 40mm, water profing cement paint, mt vibratory roller for 200mm loose metal, iron square and rectangle pipe, iron circle pipe, iron door with frame and palla, paving block, water proofing liquid, water proofing net, mixer machine with operator, jcb with operator, tiles ceramic, aluminium window, iron window, checkers, door set, tractor-trolly with driver and labour (up to 1km form gp), ms nails (khilla), centring bhada, iron board, ferul, hpl bathroom door, polimer liquid(water proofing), nani trap, toilet seat, comod seat, r.c.c.pipes np2 class 900mm dia, r.c.c.collar np2 class 900mm dia, r.c.c pipes 900 mm dia, worksite facilitie/creche/drinking water/firsy aid, tap 1/2 inch brass, unioun, valve 1 inch, bid cock 1/2, niddle, channel, granite
Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material