Latest canopies Tenders | Government canopies Tenders

CTN :39557452

14 Mar, 2025 3.45 Lacs

Rajmahal - Jharkhand

Tender For repairing of outer canopies of silo-1 of rajmahal chp.

State Government

CTN :39565418

13 Mar, 2025 4.97 Lacs

Dharamshala - Himachal Pradesh

Tender For repair and restoration of type v residential building at chilgari - wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., painting one coat (excluding priming coat) on previously painted wood and wood based surface with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other foreign matter sand papering and stopping with ready mixed paint other than white complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., painting one coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint, brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter:- with readymixed paint other than whiten complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing panelled,glazed or panelled and glazed shutters for doors, windows and clere storey windows including black enamelled iron but hings with necessary screws 40mm thick in 1st class deodar wood. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing wire gauge shutters using galvanised m.s. wire gauge of i.s. gauge designation 85g. with wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw 40mm thick (1st class deodar wood). complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works .complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of grith upto 30 cm. measured at a height of 1 metre above ground and removal of rubbish upto a distance of 20 metres outside the periphery of the area cleared. complete in all respects as per direction and to the entire satisfaction of engineer-in-charge witnin all leads and lifts., brick work using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( 1 cement : 6 sand ) ist class bricks. complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts.

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government/Public Sector

CTN :39038675

08 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of fip package - pressure transmitter [smart] (range '0 to 40 kg/cm(g)) , pressure transmitter [smart]-remote seal (range '-1 to 40 kg/cm(g)) , differential pressure transmitter [smart]- remote seal (at hp &lp) (range '-1 to 2 kg/cm2(g , temperature transmitter [smart] , pressure gauge [0-60 kg/cm2(g)] , differential pressure gauge (0-0.5 kg/cm2(g) , rtd with thermowell [m33*2, l1-325mm, n1-100mm (40 kg/cm2)] , frp canopies for transmitters , frp canopies for jbs , frp canopies for rtds, tc

CTN :39544024

10 Mar, 2025 6.78 Lacs

Chandigarh - Chandigarh

Tender For replacement of old conventional type fittings and electrical accessories in sakhi niwas (working women hostel), sector 24, chandigarh. - dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no.1.28 supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required., 3 module, 4 module, 6 module, 8 module, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 amps switch, 3 pin 5/6 a. socket outlet, 15/16 amps switch, 6 pin 15/16 a. socket outlet, dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25 mm, dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., s/e of 2 x2 led fitting surface type square type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. the fitting should be philips / wipro / bajaj / trilux / jaquar/ havells/ crompton/ panasonic/ lt make only. (as per complete item no. 9 of the dnit)., s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar make of polycarbonate material only. (as per complete item no. 10 of the dnit)., supply & erection of exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (as per complete item no. 11 of the dnit)., size 12 sweep 900 rpm with louver of havells make turbo force sp / orient make industrial heavy duty / crompton make exhd 380-6-1/ bajaj make supreme dlx/ usha make turbo hdef only., providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 12 of the dnit)., 63/100 amp 4 pole mccb (thermal magnetic release)., s/e of ceiling fans with copper winding but without regulator complete with aluminium blades, plastic canopies 2 nos. double ball bearing, ms hanging rods, condenser, reels, clamps etc. (as per complete item no. 13 of the dnit)., size 48 1200mm sweep ceiling fan of havells make velocity white / orient make new breeze / crompton make high speed / usha make striker/ bajaj sabse tezz ee only., s/e of enclosure for following rating mccb 3 pole/ 4 pole made out of 16 gauge m.s. sheet. the enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of engineer-in-charge., 100 amp. 4 pole, s/e of led bulk head luminaries weather pro

CTN :39555900

14 Mar, 2025 3.45 Lacs

Godda - Jharkhand

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - coal mines; repairing of outer canopies of silo1 of rajmahal chp; service provider

CTN :39530726

07 Mar, 2025 NA

Imphal - Manipur

Tender For supply of mta stores for 57 mtn div - ordinary portland cement 43 grade in hdpe bags of 50kg each confirming to is 269 1976 make acc ultra tech star cci birla gold dalmia , fine aggregate natural sand conforming to is 383 1978 , coarse aggregate crushed stone 20mm graded conforming to is 383 1979 , coarse aggregate crushed stone 40mm graded conforming to is 383 1979 , broken stone aggragate 63 to 40mm hard core , m and l for roof trusses framed trussed purlins of 80 mm dia ms pipe fastening including distance pieces cleats etc , mild steel rolled sections such as angle iron of size 50x50x6mm for view cutter column post section etc , mild steel square tubular section for structural work of size 50mm x 50mm isi marked , ppgi profiled sheet of size 12 feet x 3.5 feet 0.63mm thick make tata sail bhushan jsw , ppgi profiled sheet of size 20 feet x 3.5 feet 0.50mm thick make tata sail bhushan jsw , ppgi ridge cover 1.5 feet wide 0.63mm thick make tata sail bhushan jsw , mild steel corrugated galvanised cgi sheet 12 feet x 3 feet 0.63 mm thick isi marked make , gi j hook 6mm dia 100mm long with cup and bitumen washer and nut , ms hold fast screws with accociated accessories , pr laminated wall panelling wooden board of size 8 feet x 4 feet x 6mm thick as approved colour for accociated work with complete finish , anodised aluminium section for support of wall paneeling board with extruded built up standard aluminium tube of size 32 x32mm aluminium section shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat, screws all as specified and directed , ply wood 19mm thick size 8 feet x 4 feet make green ply bhutan ply national kitply , plywood commercial bwr grade isi marked of size 4 feet x 8 feet 12mm thick make green ply bhutan ply national kitply , acrylic sheet 3mm thick for window panes , tapping screw nails 1 inch 2 inch 3 inch 4 inch , wooden runners 2 inch x 2 inch , second class hard wood batten 50mm x 50mm , white cement make jk birla , triple layer plastic water tank for water storage 500 ltrs make sintex isi marked equivalent isi marked , triple layer plastic water tank for water storage 1000 itrs make sintex isi marked equivalent isi marked , gi pipe 25mm bore 6m long medium grade make tata hindustan jindal swastik , gi pipe 32mm bore 6m long medium grade make hindustan jindal swastik tata , gl elbow 25mm bore isi marked , gi socket 25mm bore isi marked isi marked , gl tank nipple 25mm dia with gi check nut isi marked , gl tee 25mm bore isi marked , gl union socket 25mm bore isi marked , teflon tape 3 8 inch wide 10 mtr roll , gun metal gate valve 25mm make cera somany jaguar plumber sona jindal , cp cast copper alloy bib cock long body 15mm bore make zoloto seico essess cera somany plumber sona , cp cast copper alloy pillar cock 15mm bore make zoloto seico essess cera somany plumber sona , cp cast copper alloy stop cock 15mm bore make zoloto seico essess cera somany plumber sona , cp cast copper alloy stop cock angle type 15mm bore make zoloto seico ess cera somany plumber sona , towel rail cp brass 600mm long with peg stay bracket parryware sona sera make , pvc soap tray make symet prayag supreme , cp toilet paper holder standard pattern , pvc waste pipe 32 mm dia for whb with floor trap gratting 75mm dia , pvc flushing cistern of 10ltr capacity with flushing pipe and fittings complete make parryware cera hindware waterbird slimline , waste coupling 32mm dia for whb , mild steel bow handle 125mm , mild steel butt hinges 100mm medium weight , mild steel sliding door bolt 300mm , mild steel tower bolt 200mm , emery cloth 100mm wide various grades , self tapping screws with ppdm washer 100mm long , wood screw half inch , wood screw 0.75 inch , wood screw 1 inch , wood screw one and half inch , wood screw two inch , synthetic enamel paint high gloss superiour quality any shade make assian burger narolac ici shalimar colour green , synthetic enamel paint high gloss superiour quality

State Government

CTN :39513011

17 Mar, 2025 12.48 Lacs

Murshidabad - West Bengal

Tender For installation of canopies over 2 nos diesel generator set along with panels and 2 nos. of dg oil tank and other allied civil works at drc building, berhampore dist-murshidabad

CTN :39439353

10 Mar, 2025 10.00 Lacs

Ratangarh-Mp - Madhya Pradesh

Tender For swachhta samagri year 2025-26 - phynile, maleria oil (anti larva), nuvan, tomophos, melathian lequid, melathian powder, ddp powder, lal powder, kresolic powder, ankur powder, hand garbage lorry two wheeler heavy iron 140 liter sheets not less than 1.60mm thicknes angle chassis frame, ms solid rubber tyre, garbage box (dustbean) iron 6x4x4 feet heavy, nilkamal dustbin 10 litres hdpe without stand, nilkamal twin dustbin 100litres hdpe swing type with stand, spray pump 16 liter isi, phynile goli, chuna powder, fitkari best quality 50 kg beg, meera 71 (kharpatwar nashak) 100 gm packet, fogging oil, fire fighting foam (aueous film forming foam), nilkamal twin dustbin 60litres hdpe swing type with stand, sodium hypocloride, ppekit, jcb kiraya, geti, fawda, tagari, khurpee, golden hands vinyl / rubber gloves nitrile rubber length 22 cm width 12cm, thicknes 0.2mm, ankle men poly vnyl chloride industrial boots size 8, ankle men poly vnyl chloride industrial boots size 10, ankle men poly vnyl chloride industrial boots size 9, safety helmet forconstruction cleanning use, colour yellow white ratchet type for head safety 428 grams material hdpe, fire extinguisher capacity 4kg fire class abce, mask n95, first aid kit, structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position complete:(lohe ka jangla, lohe ki jaal, lohe ka chamber, and naaliyo me kachra rokne ki lohe ki jaal, angle etc.), battery slv600l total warranty18 months flat +06 months pro-rata battery type automotive dimension 260(l)x173(w)x225(h reserved capacity 79 battery voltage 12 volts, tractor battery exide gold(gold88l) warranty* : 18 month dimensions : 408(l)x176(w)x235(h) battery capacity : 88ah, male uniform including pent, shirt cloth set, female uniform including saree, petikot, blouse cloth set, rain jacket with hood and trouse male and female size as per ulb requirement, bag pack closer machine capacity 10-12 bag/min brand royal pack model bgm-10 r, male/female jacket, jhadu

State Government

CTN :39482556

17 Mar, 2025 20.26 Lacs

Kulgam - Jammu And Kashmir

Tender For installation of children playing equipment/fountain at womens /children park kulgam (balance work). - (a) : civil work for (construction of fountain)earthwork in excavation by mechanical means for foundation, trencheing, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage, providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:2:4) mix including curing, carriage, but excluding form work. (circular bed), a) centering and shuttering including strutting, propping etc. complete including removal of form work.(below ground), b) centering and shuttering including strutting, propping etc. complete including removal of form work.(above ground), reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete., providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of eic., providing and laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to is 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 coarse sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of eic., (b): civil work for control panel (8x4)earthwork in excavation by manual means for foundation, trencheing, incl. getting out excavated earth and disposal of surplus excavated eath and includes dressing of sides and ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. compacting in foundation trenches and carriage includes backfilling., providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete.@50kg/cum., providing and fixing of class b medium duty g.l. pipe (100mm dia, 6mm thick) conforming to is 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the ms plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required., providing and fixing of flange plates (8x8) and 8mm thickness, including welding with gi pipes & drilling holes etc., providing and fixing of foundation bolts type "j" (m20x300)mm, including nuts and washers as required thereof. the job includes providing steel rods of appropriate size to fix bolts properly in concrete., structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by eic.qty @5kg/sft, providing and fixing of ismc:75 channel sections as per the site requirement and approved by eic. the job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by eic., providing and fixing coloured high rib corrugated g. s. sheet (18 swg) roofing including

Canopies Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government