Latest carbure ball Tenders | Government carbure ball Tenders

corporations/Associations/Others

CTN :39644995

24 Mar, 2025 6.40 Lacs

Coimbatore - Tamil Nadu

Tender For procurement of lt metal parts

corporations/Associations/Others

CTN :39645137

24 Mar, 2025 NA

Trichy - Tamil Nadu

Tender For supply of 11kv 30kn metal parts

corporations/Associations/Others

CTN :39647633

24 Mar, 2025 NA

Kolar - Karnataka

Tender For auction sale of scrap control panel board,scrap gi / ms pipes,used / scrap wooden furnitures,compressed turning & boring chips,condemned / scrap machines,scrap ms pallets,condemned transformers,scrap dc wheels,condemned / scrap filters,used / scrap small casting, forging, bushes, etc.,used / scrap sheet metal / fabricated rejected parts,used / scrap m.s. items,used / scrap ms stands,nickel chromium heating elements/rods/tubes etc.,scrap aluminium electrical cable,used / damaged light fittings,used / damaged wheel discs, disc rims, brake drums etc,scrap ms tubes / channels,end bits of steel rods and pipes,used / damaged electrical items,scrap ss sheet metal items,scrap fabricated ms rods & stands,used / scrap stainless steel canteen utensils,scrap automobile spares,scrap high percentage nickel chromium charge trays,used / damaged retort and lid,condemned hardwares,condemned rusted springs,condemned/drill bits/reamers/end bits/slot drills,cond / used nickel chromium baskets,aluminium scrap,aluminium turning and boring chips,condemned test pieces,brass turning and boring chips,used / damaged / removed from refurbished transmissions pressure plates,cond residual castings of assorted sizes etc,cond small /medium / big of various shapes castings etc,used / damaged tatra back bone tube,cond / used chips handling trolleys,scrap pallets, trolleys, hydraulic tanks, covers, etc.,used / dameged jigs, chucks and fixtures,scrap / used / codemned side discharge loader,damaged tyres,used steel barrels,used oil filled in barrels,condemned / used empty plastic barrels,scrap plastic welding spools,used / scrap batteries,used / scrap / miscellaneousellaneous - belts, masks, shields, hoses, etc.,used / scrap cartoon box,condemned / scrap e-waste,used / scrap / miscellaneousellaneous - rubber, tubes, flops etc.,cond / used transport tyres,cond rubber items / felts hose assemblies,used / damaged empty plastic barrels,scrap wood

Central Government/Public Sector

CTN :39645418

22 Mar, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and supply and fix

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

Central Government And Public Sector

CTN :39112820

20 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

corporations/Associations/Others

CTN :39620311

20 Mar, 2025 NA

Hubli - Karnataka

Tender For auction sale of scrap ht metering cubicle without ct & pt,scrap ug/abc cable al. description edited,scrap ug/abc cable al. description edited.,scrap ug/abc cable al.description edited,scrap gos & iron,scrap gos with insulator,ms angles & etc,rcc pole skeleton,scrap iron poles,scrap g.i pins,scrap three phase electro mechanical energy meter (fibre body),scrap three phase metal body energy meter,scrap three phase etv lt & ht energy meter ? e waste,scrap iron,scrap brass parts,three phase (electronic) static energy meter - e waste

corporations/Associations/Others

CTN :39620818

17 Mar, 2025 NA

Trivandrum - Kerala

Tender For auction sale of un serviceable diesel and air tanks, fire extinguishers,un serviceable rear and front brake drums,un serviceable miscellaneous auto parts.,un serviceable gear box cases, t- covers, flywheels, etc.,un serviceable trolley jacks, etc.,un serviceable rubber item.,un serviceable clutch disc,un serviceable led destination paannel 6 feet,un serviceable led desttination pannel 3 feet,un serviceable fip parts,un serviceable braze bushes, rivets, synchrocones,steel scrap:- king pins, spring shakle pins, etc,un serviceable spring brackets, shakles, coupling flanges, etc.,un serviceable cylinder liners and broken liners.,un serviceable bearing of all type withsleeves, cones, needles etc.,un serviceable crown and pinion spares,un serviceable front & rear brake chamber,un serviceable propeller shaft,un serviceabe armatures, rotor assy, starter assy, etc.,un serviceable battery cable, copper wire, copper coil etc.,un serviceable electrical motor assembly, etc.,un serviceable gear box assy,scrap iron plates,un serviceable aluminium materials aluminiumradiators and inter coolers,un serviceable metal chip and powder, turning wastes (machine shop),un serviceable gear wheels, main shafts counter shafts, etc.,un serviceable cylinder head,un serviceable cylinder blocks,mixed scrap:- un serviceable shock absorbers, air cleaners, etc.,aluminium materials;- aluminium sheet cut pieces , etc.,iron scrap:- un serviceable angle irons, c-channels, etc,un serviceable volvo wheel disc,un serviceable push back seat frame with cushion, without cushion,un serviceable plastic seats frame with cushion, without cushion

corporations/Associations/Others

CTN :39627269

21 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of lt metal parts

Central Government/Public Sector

CTN :39605744

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil

Carbure Ball Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors