Get complete information related to latest Cartridge Fuse Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cartridge Fuse Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cartridge Fuse Tenders.
Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.
Tender For supply of cartridgefuse 16a, 100v as per clw spec. no. clw/es/f-8 (alt.-e) and drg. no. clw/e s/sk-1/f-8/e. [ warranty period: 18 months after the date of delivery ]
Tender For supply of electric line materails - electrical items :, connector pipe to panther, connector panther to panther, connector panther to ab switch, connector pipe to ab switch, connector dog to ab switch, pg clamp for 80/100mm2 conductor, pg clamp for 232/150mm2 conductor, pg clamp(ring type) for 232/150mm2 conductor, led flood light out door with ip 66 protection rectangular (100 watt), al. winding wire, lt pin insulator with pin(porcelain type), lt pre-insulated mid span joint suitable 95mm 2 phase, insulation piercing connector for db charging, insulating piercing connector bracing suitable for t. joints, 33 kv disc insulator with fitting 90 kn (b&s) type polymer, 33 kv polymer type pin insulator with pin 10 kn, (nuts & washer), 33 kv post insulator, 33 kv fuse set, 11 kv (b&s type) disc insulator with fitting polymer, 70 kn, 11 kv polymer type pin insulator with pin 5 kn nuts & washer type, 11 kv fuse set, suitable lungs, suspension clamp (assembly suitable up to 70-85 sq mm bare messenger including 1 no suspension clamp with bracket two meter stainless steel strap & 2 no ss buckle), spring loaded (distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming & 3 outgoing 3 phase connection as per field requirement), dead end bracket suitable above 70 sq mm bare messenger including 1 no dead end bracket + i no dead end +2 mtr ss strap + 2 nos ss buckle.(minimum braking load 15 kn), jointing sleeve suitable for 150-232 sq mm, lt shackle insulator with strap porcelain type
Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar
Tender For supply of fd electrification (solar/10kw) - supply, installation, commissioning and testing of fd electrification solar 10kw comprising mono-crystalline high transmission, low iron tempered glass, ar coated(>3.0mm) pv panels 400wp x 25 nos (or other combination to meet 10kw) mounting on gi structure with fixed tilt angle of 30 degree for maximum absorption of sun light, with lifepo4 battery 120v x 300ah suitable for running of 6000w continuous for 5-6 hrs and pure sine wave solar hybrid pcu 10kva inbuilt battery charge controller and charging option from solar and grid/dg and wind turbine as per availability. , solar panels of pv module shall be used reputed mnre approved mono-crystalline solar panels of 8kw having efficiency more than 21%, series & parallel combination will be used to set up the desired voltage and current needs. equivalent to ec 61215 ,iec 61730, iec 61701. battery bank of 120 v, 300ah , maintenance free lithium ferro phosphate battery as per is 16046 , iec62133-2:2017. power conditioning unit (hybrid inverter) of capacity 10.0 kva hybrid inverter with modbus communication technology to interface bms of battery bank of lifepo4. prefabricated shelter and casing for batteries of size l=2.0 x1.0 mtr. structure of solar item. mc4 connector. dc rated fuse. array junction box. earthing and lighting arrestor. off grid solar hybrid invertor. complete specification as mentioned at brief specification of ts. all components of the fd electrification including battery will be delivered for within at 150 km radius of 01 x balanti fram & 01 in ropa. , supply and installation of power supply distribution of 10 kw to indl shelters upto 10 kw capacity. ,