Latest catenary wire Tenders | Government catenary wire Tenders

Central Government/Public Sector

CTN :39203312

18 Feb, 2025 NA

Hubli - Karnataka

Tender For supply of copper catenary wire 65sqmm

CTN :39218426

06 Mar, 2025 NA

Multi City - Multi State

Tender For supply of procurement of insulation sleeve for catenary wire.

Central Government/Public Sector

CTN :39195831

25 Feb, 2025 13.89 Lacs

East Singhbhum - Jharkhand

Tender For annual civil maintenance work at turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the engineer. earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement. supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. providing and fixing 125 into 63 mm m. s. hinges of approved quality and make. providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete. providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or sh

CTN :39164163

21 Feb, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of automatic air freshner machine with refill , coms batteries , ss drinking glass , panasonic cordless phone , plastic grip all size , taper screw , key board aluminium , white acrylic board 24 inch x 21 inch , sofa cover single seater , sofa cover three seater , ss wire mess , stand for drinking glass 10 glass each , inverter box , customised duty state board size 3x2 feet , marin ply wood 19 mm , sun mica roll , white board size 3 x 2 feet , stainless steel coffee and tea flask capacity 01 ltr , wireless calling bell , wooden name tally bilingual , extension cord heavy duty , bucket hanging hook

CTN :39176207

24 Feb, 2025 NA

Gurdaspur - Punjab

Tender For supply of drum , pipe iron 10ft , toilet roll , room freshner , dettol , good night refil , daily ration register , hanging bell , all out with refil , mobile stand , plastic gamla , dura cell , red runner matt , green cloth hassan cloth , teracoat , signal red paint , signal white paint , red primer , red paint , paint brush 50mm , chuna white , binding wire , wall cloth , linto , glass cover , table cloth stiching , urine cover , tray cover , 02 x link chappa welding , 02 x link goli welding , gear goli welding , 02 xlink chappa , 02 x linr pin , 01 x lever , 4 inch cutting wheel , 14 inch cutting , 10 no welding rod , maximile ultrarod 1 ltr , double darchen mix 5 colours , ceme items

Central Government/Public Sector

CTN :39171182

22 Feb, 2025 40.00 Lacs

Tezpur - Assam

Tender For repair replacement certain maint work various location at misa camp under ge s tezpur - taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm and n.exc 4 sqm each ,complete all as specified and directed., taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm ,complete all as specified and directed., taking down shutter of any description not exc 1 sqm each,complete all as specified and directed., taking down shutter of any description exc 1 sqm but nexc 2 sqm each,complete all as specified and directed., taking down and refixing of shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed., dismantling of ac sheet corrugated / semi corrugated sheets/ cgi sheets in wall cladding or in roof covering,complete all as specified and directed., m & l pre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with l type j type or cranked hook bolts complete all as specified and directed., s&f pre- painted galvalume aluminum zinc coating gi based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading /eaves board to wall and fixed with self tapping screws complete all as specified and directed., dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed., m&l aluminium powder coated snap grid false ceiling of size 600 mm x 600 mm x 4 mm thick for fixing boards/files with aluminium anodised main t section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia gi wire and anodised adjuster complete all as specified and as directed., m & l 4mm thick non asbestos fibre cement building board fixed/inserted to aluminium frame work, as in ceiling complete all as specified and as directed., m&l mild steel flat iron 25 x 3 mm, as in holdfast for door, window frames or chowkats etc., cut to length or drilled hole and fixed with screw, etc., grade of steel conforming to fe-290 gde e-165, complete all as specified and as directed., m&l pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate., m&l pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate, s&f 35 mm thick factory made flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side,complete all as specified and directed., s/f 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as specified and directed., s & f factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of m.s.tubes for top & bottom rails.m.s.frame shall be covered with heat moulded plain colour pvc "c" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colo

Central Government / Public Sector

CTN :39155045

24 Feb, 2025 NA

Multi City - Multi State

Tender For supply of uninsulated cadmium copper catenary wire, 65 sq.mm, (19/2.10mm), as per rd so specification no. ti/spc/ohe/cat (cu-cd)/0971 or latest for cadmium copper conductor s for over head electric traction. material to be supplied in wooden drums in standard length of 3200 meters per drum. [ warranty period: 30 months after the date of delivery ]

CTN :39114840

18 Feb, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of rotational moulded polyethylene water storage tanks as per is 12701 (q3) , copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , towel rail / ring for bathroom (q3) , bathroom or toilet mirror (v2) (q4) , waste pipe (q3) , ptmt tap fitting (q3) , bathroom water shower (q3) , toilet seat covers (v2) (q4) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , towel rail / ring / rack / hooks for bathroom (q3) , flushing cistern (q3) , connection pipe with nuts (v2) (q3) , european pattern toilet seat vitreous china (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , tower bolts (ferrous metals) as per is 204 (q3) , m - seal as per is 9197 (q3) , door handles as per is 208 (q4) , hydraulically regulated door closers (q3) , looking mirror 600x450x5mm with pvc frame , hanging system rectangular mirror , glass pane 6 feet x 4 feet x 3 mm plain , glass pane 2 feet x 3 feet x 4 mm plain , glass pane 6 feet x 4 feet x 4mm frosted oblique tinted , glass pane 6 feet x 4 feet x4 mm , glass pane 6 feet x 4 feet x 4 point 8 mm , factory made flush shutter of size 900x2100x35mm , cp bib cock 15mm fancy with flange , cp soap dish fancy type 100mm , ss bracket for for curtain rod , ss wall to wall bracket for 20mm for curtain rod , ss finials for 20mm for curtain rod , ss bracket and knob for 25mm for curtain rod , lid for sintex for 1000 oblique 500 ltr , pvc float valve 20mm symet complete , pvc float valve 20mm brass complete , pvc float valve15mm brass complete , mortice lock 100 oblique 65 , pvc float valve 15mm symet complete , gate valve 15mm gm , gate valve 20 mm gm , pvc waste pipe 32 x 900mm , aluminium sliding door bolt 250mm , flashing tape , butt hinges 100mm steel , butt hinges 75mm steel , butt hinges 50mm steel , door spring helical150mm , ms door spring rat rail 200mm , door stopper aluminium double 75mm long , hasp and staple 100mm size , wire mesh 0 point 9mm steel , steel wire cloth 0 point 36mm nominal dia , rubber beading for ai door , fevicol , white cement make jk , putty for fixing glass , wire mesh 0 point 41 mm steel , door magnet catcher , curtain rod 25mm dia stainless steel , plywood comm 8 feet x4 feet x 19 mm , gi elbow 15mm dia , gi tee 15mm dia , gi tee 20mm dia , gi elbow 20mm dia , tank nipple 20mm isi marked , tank nipple 15mm isi marked , gi tubing 15 mm med grade , gi tubing 20 mm med grade

Central Government/Public Sector

CTN :39127991

14 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply of un-insulated cadmium copper catenary wire 65 sq.mm (19/2.10 mm) as per rdso specification no. ti/spc/ohe/cat (cu-cd)/0971 & str no. ti/str/020 (rev.02) or latest.

Central Government/Public Sector

CTN :39099703

10 Feb, 2025 NA

Hubli - Karnataka

Tender For supply of un-insulated cadmium copper catenary wire 65 sq. mm. (19/2.10 mm) conforming to rdso specification no. ti/spc/ohe/cat (cu-cd)/0971. [ warranty period: 30 months after the date of d elivery ]

Catenary Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector