Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m
Tender For supply of operation of 4 x 300 tr hvac plant , cmc of 4 x 300 tr hvac plant , amc of water treatment plant , chemical cleaning of existing resin in the softener plants including removing of existing resin, identification of worn out resins, cleaning and revamping, operating the softener plant , replacing the existing resin make thermax model tulsion t42na and refilling the softener plant note the resin should be supplied before ist quarter of the contract and 4th rar bill will be released , replacing the existing compressor lubricant oil ici rl 68 filter drier core, filter mcquay, wuhan, china part no 735030528 removing the existing oil and submission of oil test reports , top up of r 134 a refrigerant gas as and when required to achieve optimum level of refrigerent in chiller make mcquay pfs 330.3 as per the approval of eic. , 50mm frp coating for existing cooling tower chilled water lines , providing chemical dosing for 4x300tr cooling tower to keep water quality with in permissible limit, including submission of water test reports
Tender For procurement of various scientific equipments at gondwana university gadchiroli - chemical storing refrigerator - refrigerator and freezer 2-8 oc and -40oc, hot air oven- 1550 w dry hot ovencapacity 80 lit, digital hot air oven- chamber volume- 92 litersinner chambermade of stainless steel s.s. 304 mirror polished material.outer chamber- fabricated from crc materialpaint- powder coating in attractive shadesno. of trays- 2 nos. (additional shelf at extra cost)temperature range- 50 c to 250 ctemperature sensors- pt-100 typetemperature controller- microprocessor based auto tune pid controllertemperature accuracy- 1 c or bettertemperature resolution- 0.1 cpower consumption- 220/230 volt, 50 hz, single phase, ac supplymobility- bench top model, fix legsrating- 1.5 kwoverall dimensions- 635 x 720 x 790 (l x w x h) mmweight (approx.)-72 kg
Tender For supply of passivator chemical: fascoat kna, non-chrome passivator for phosphate coating .this chemical should be non-crome based phosphate sealing chemical which must be given maximum prot ection against corrosion as well as paint adhesion. chemical working parameters:(1) concentration :0. 02-0.1 %v/v( 2) ph value 7-9 (3) working temperature 55 to 60 degree centigrade. make-alko , syngl oss or metal gaurd or similer in 20 ltr cane. [ warranty period: 30 months after the date of delivery ]
Tender For supply of accelerator chemical compound, accelerator for phosphate coating process to control fe rrous iron in phosphating bath. compound chemical foscoat 60. concentration 100-150 gm. make alk o, syngloss or metal guard or equivalent in 5kg packs [ warranty period: 30 months after the date o f delivery ]