Latest cathodic protection work Tenders | Government cathodic protection work Tenders

State Government

CTN :39367159

03 Mar, 2025 NA

Gadchiroli - Maharashtra

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , bow saw frame 90 cm long as per is 11251 1985 specification annexure-2 , bow saw blade 90 cm long , triangular file 6 inches jk super dive , triangular file 8 inches jk super dive , digit nail set english 20 mm , measurement tape - 30 mtrs freemes company , measurement tape - 15 mtrs freemes company , measurement tape - 7.5 mtrs freemes company , tailor tape - 1.5 mtrs cotton coated , hammer 0.50 kg. , hatoda 2.5 kg. , hatoda 5.0 kg. , paint - red asian paints , marking pen , marking pencil natraj , marking ink , datmodi yedpatti , pachar , terpentine 1 ltr pac , geru bag - 25 kgs , hirmunji per 25 kg , lime bag 25 kgs , black japan 1 ltr.pack , chalk box white , chalk box colour , ready reckner , nylon rassi dor , forestry safety helmet , gum boots , gloves forestry , chain saw safety apron , chain saw safety caps , ppe kit for nursery chemical handling , chain saw safety gloves mask goggles , round file , dragging chain 20mt , tarpoline plastic 24 x18 , water tank 500

Central Government And Public Sector

CTN :39316491

21 Feb, 2025 NA

Katihar - Bihar

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 5-10 ). type of construction vulcanized rubber upper and sole. 3).last/ sol e pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recomme ndation for working environment with high voltage hazards power station operations substation (step -up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high cur rent leakage hazards electrical installations. 6). compliance- is?15298 part 2:2011 class 3 ac (for inst allations with nominal voltage up to 30kv a.c. sb = standard basic protection as per iso 20345:2021 safety footwear, heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contac t sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 gr ade 1 toe protection compression resistance, up to 26.5 kv electric shock resistance (esr) protectio n. 7). dielectric footwear* astm f1117-03(2013) (min 26.5 kv ac) 8). lining material selected polyest er grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design t o minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z1 95 impact and astm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclabl e polybag & 6 pairs in a carton. various sizes of electrical safety shoe requirement (1) size no.5=02 p airs, (2) size no.6=15 pairs, (3) size no.7=30 pairs, (4) size no.8=30 pairs, (5) size no.9= 16 pairs, (6 ) size no. 10= 7 pairs and remaining as per requirement. one sample should be approved by the cons ignee before bulk supply. test certificate must be submitted by the firm. make: harvik or similar. [ w arranty period: 30 months after the date of delivery ]

CTN :39321587

05 Mar, 2025 NA

Raigad - Maharashtra

Tender For supply of mild steel chequered 25mm thick fe 410w , frp 1200 by 600 by 40mm thk 2 pt 5 mt load , frp 600 by 600 by 40mm thk 2 pt 5 mt load , ss wire mesh 0 pt 36mm dia 1 pt 4mm , crack filler shali seal , damp proof coating proof 2 , spindle tap 2 nos , spindle tap 3 nos , spindle tap 7 nos , att chemical , false ceiling pvc 10mm thk 600x600mm , kitec pipe 20mm , kitec elbow 15mm , kitec elbow 20mm , kitec union 20mm , wpc shutter 20mm , double action hydraulically , fevicol 1 kgs

Central Government/Public Sector

CTN :39278465

20 Feb, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of alkyed protective coating enamel- grey - temperature index 130 to aa27513 rev. 02. , chemical res epoxide red oxide zinc phosphate priming paint (2 pack system) base with accelerator , chemical resistant epoxide finishing light grey paint base with accelarator shade 631 of is: 5: 2007 , oil resistant air drying synthetic enamel jasmine yellow paint to spec aa56132 rev. 05 shade no. 397 , high build black coal tar epoxide paint base with accelerator as per spec aa56135 rev. 05. , canary yellow marking & stencilling paint shade no. 309 of is: 5: 2007 to spec. bp56187, rev. 03.

Central Government/Public Sector

CTN :39112758

22 Feb, 2025 NA

Bathinda - Punjab

Tender For corrigendum : supply of brushable chemical protectoive resistamnt coating compound

CTN :39222998

26 Feb, 2025 NA

Kolkata - West Bengal

Tender For supply of lab equipment minimum average annual turnover of the bidder (for 3 years)- supply, installation and placement of functional factory made equipment set up consisting of r.h. 900 ht.c-frameassy. for table depths 770 wall side without upright with 1540 island without upright & 920 wall side withupright (2), r.h. 900 ht.c-frame assy. for table depths 620 wall side, 1240 island without upright & 770wallside with upright (2), l.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540island without upright & 920 wall side with upright (2), l.h. 900 ht.c-frame assy. for table depths 620 wallside, 1240 island without upright & 770 wallside with upright (2), common 900 ht.c-frame assy. for tabledepths 770 wall side without upright , 1540 island without upright & 920 wall side with upright (4), 900 ht.corner c-frame table (1), 1500 module length horizontal members (3), 1200 module length horizontal members(4), 770 depth wall side without upright end cover panel (4), island without upright c-frame joining bracket (1),1500 module length single side electrical trunking - cutouts: 6 module + 6 module + 6 module (3), 1200 modulelength single side electrical trunking - cutouts: 6 module + 6 module + 6 module (2), outer cover for singlesided electrical trunking (6), wfu-c-su-900-1s-rh-635h (1), wfu-2s-1d-750w-635h (6), wfu-2s-1d-600w635h (8), pp drop-in sink model s 06 560 mm (w) x 355 mm (d) (1), 3 way water faucet bench mounted, 8""swing gooseneck model no. 100/32 (1), silicon sealant - black (1), jet black granite (sq.mt.) 18 (2) mm thk(8.5 smt), masking tape, 6mm self adhesive natural rubber strip (40mt), flexible/f serated connector model : hp01 make: premier (1), anti-siphon bottle trap model : s 04 make: premier (1), 6/16a, 6 pin shutter socket - modelno: m1332 (30), 6 module plate - model no: cs956m-s (15), 16a, 1 way switch model no: m0130 (30) as perdirection of engineer in charge , supply and installation storage cabinet for storage with top cover plate and provided with a ventilation system toenable exhaust of localized fumes emanating from the materials stored. the material should be is 1.2 mm crca mswith pure epoxy powder coating. it must be fitted with a float glass to enable visibility inside the cabinet. it shouldalso has louvers/perforations for air supply. ms apparatus storage cabinet with over all dimension of 750w x560d x 1800h mm as per direction of engineer in charge , supply and installation of storage cabinets with a full pp construction, dimension of storage cabinet is 1000w x1500h x 486d mm. all safety claims of this product are backed by third party certification for chemical spot test for49 chemicals listed in sefa standards and used across various industries. the cabinet to have proper ventilationensuring air circulation and preventing a build-up of dangerous fumes within the cabinet. the shelves comprise ofremovable height adjustable collection trays that are leak-proof, enhancing the safety factor of the storage units.louvers are provided on the front doors to allow inward low of fresh air. zero- corrosion: full polypropylene body,with no exposed metal hardware, ensures there is no corrosion. closing mechanism: the cabinet has a latch to ensureproper shutting of the doors. removable & height- adjustable pp trays as shelves: the pp collection trays can beremoved easily, and can be height-adjusted as required. load bearing capacity & spill containment: each shelf cantake up to 30 kgs (approx) of uniformly distributed load. the shelves are leak-proof and fully contain accidentalspillages. locking provision: the doors to have provision for using a padlock to safeguard the contents of the cabinetas per direction of engineer in charge , supply, installation and placement of functional factory made equipment set up consisting of r.h. 900 ht.c-frameassy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side withupright (

Cathodic Protection Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector