Latest cement concrete tile Tenders | Government cement concrete tile Tenders

Trust

CTN :39373671

24 Feb, 2025 4.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For upgradation of exit frisking area by way of providing precast concrete tile path and renovation of que railing, including fabrication of exit gate etc complete at nunwan camp for yatra 2025.

CTN :39429057

28 Feb, 2025 22.82 Lacs

Pune - Maharashtra

Tender For repair & renovation of external wall and internal work and carpeting of road with bituminous concrete along with kerb stone, road marking at praptikar sadan, dr. dhanajay gadgil road, erandwane, pune. sh renovation of tile work and reapiring of entrance compound wall work at praptikar sadan 60/61 karve road pune.

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

CTN :39390437

24 Feb, 2025 NA

Dimapur - Nagaland

Tender For supply and installation of maint stores in hq 3 corps aor - , supply and installation of maint stores for poklain jcb (js-140) all complete as per bid., overhaling of engine js 140 with material, repair of hyd pump, repair of bucket mounting stud, repair of hyd boom cyl, denting of cabin and repair of work, supply and installation of maint stores for mtrl handler machine ( hydra) all complete as per bid., transmission filtter, brake cylinder kit left & right, frond brake presser line, fuel filtter secondary, engine oil filter, fuel filter primary, lifting strap, chain with d shackle, hyd filter, bty +ve & -ve lead, air filter element dust cap rubber, supply and installation of maint stores for mini excavator tmx-20 all complete as per bid., ignition switch, teeth nut & bolt, grease nipple, bty terminal, hydraulic hose, hydraulic cyl kit, bty 12 v 60 ah, bucket, track chain assy, supply and installation of maint stores for vibratory soil compactor with plain drum all complete as per bid., air cleaner assy, oil filter, fuel filter (primary & secondary), hyd filter, ignition key, head light, supply and installation of maint stores for concrete mixter machine all complete as per bid., fuel filter, oil filter, fuel flexible pipe (tank to filter), fuel flexible pipe (filter to fuel pump), fuel high pressure line, fuel pump single element, injector assy, shims (between fuel pump and body), cam shaft with cam gear, inlet & exhaust valve, valve grinding paste, compression ring assy complete, push rod, push rod seal (upper & lower), air cleaner assy, silencer assy, benjo bolt, chain set for concrete mixture machine, fuel tank assy, starting handle, mixture machine overhauling, repair and greasing, tyre size 165/80r14, tube inner 165/80r14, chain sporcket, supply and installation of maint stores for walk behind road roller all complete as per bid., bty 12v 42 ah, rope starting assy, air filter, fuel filter (1/2 ltr), cock knob, ignition switch, coupling, iron cutting blade 14" make - bosh, tile cutter blade 4" make- bosch, adaptor for drill machine magnetic (8mm), concrete drill bits of all sizes, supply and installation of maint stores for zig saw machine all complete as per bid., blade for zig saw machine, nut, stud, fuel filter, tension screw gear type, starter spring single, air cleaner, oil filter, manifold rubber, petrol cap, supply and installation of maint stores for chain saw machine all complete as per bid., servicing of chain saw machine, chain for chain saw machine model: ms 170/ms/170, spark plug model 170, eng oil 2t, guide bar, crank case assy, screws and bolts, handle clamps, point set (flat content), break assy, petrol tank, starter assy, cyl cover, supply and installation of maint stores for chain saw machine all complete as per bid., chain for chain saw machine model ms382, cleaner cover, front guard, needle bearing for position, ignition coil, oil pump, sprocket, clutch drum, clutch, fly wheel metal, piston set, oil cap, nut, stud, fuel filter, tension screw gear type, starter spring single, air cleaner, oil filter, manifold rubber, petrol cap, supply and installation of maint stores for needle vibrator machine all complete as per bid., needle, starting rope, spark plug, cap for spark plug, cap for spark plug, supply and installation of maint stores for portable hand carried 2 gallon, 12v air compressor for spray painting all complete as per bid., fan belt, hose with spray gun, supply and installation of maint stores for diesel engine bs- vi hopper tipper all complete as per bid., diesel exhaust fan, fan belt, oil filter, fuel filter, bty 12 v 60 ah, break oil, coolant, power sreering oil, air filter, grease, lander, gear box oil, housing oil, temp switch, hyd oil, hydraulic hose, power break hose, wheel bearing, supply and installation of maint stores for plate vibrator all complete as per bid., starting rope, spark plug, cap for spark plug, carburators, fuel pipe, supply and installation of m

CTN :39384543

28 Feb, 2025 85.00 Lacs

Moradabad - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab - vocational lab; supply and installation of hardware; concrete mixer, unctric drit up to 20mm, plastic drums, trowel, plumb rule and boh, spirit levet, water level tube, grinders, vibrators, tile cutters, power wet saws, wetens, jointers, mason's line, try square, line and pins, brick bolster/ brick chisel, brick hammer, scutch hammer, pick axe, crowbar, picks and beaters, wooden float, metal float, floating bule, scratcher, trowel (khurpi), measuring tape 5 meter, wooden ladder, safety glovem, safety boots, knee pad, dveralls, nose mask, frist aid kit

CTN :39370328

27 Feb, 2025 85.00 Lacs

Moradabad - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab - vocational lab; supply and installation of hardware; buyer - concrete mixer, electric drill up to 10mm, plastic drums, trowel, plumb rule and bob, spirit level, vibrators, tile cutters, power wet saws, wedges, jointers, try square, line and pins, brick bolster/ brick chisel, brick hammer, scutch hammer, pick axe, crowbar, mash hammer, boaster, spall hammer, scrabbling hammer, bevel, spade, wooden float, metal float, floating rule, scratcher, trowel (khurpi), measuring tape 5 meter, wooden ladder, wooden sieve, tasla, double wheel barrow, alr wheel hand trolley, racking needle, hacking tool, water pipe, bricks

CTN :39366301

08 Mar, 2025 NA

Haridwar - Uttarakhand

Tender For supply of cement , sand , white cement , tile cutter blade , kota stone 2 feet x2 feet , pvc single core ms coper wire 1 sqmm green colour , pvc single core ms coper wire 1 point 5 sqmm red 20 black 10 , pvc single core ms coper wire 2 point 5 sqmm red 4 black 4 , pvc single core ms copper wire 4 sqmm , modular sb 18 module with pvc gang box with sheet , modular sb 3 modle with pvc gang box with sheet , modular sb 2 way , modular sb 24 way , modular false cover , 5 amp modular switch , 5 amp modular socket , 15 amp modular switch , 15 amp modular socket , ceiling rose , pvc junction box 4 way 25mm , pvc conduit l band 25mm , pvc flexible pipe 25mm , pvc conduit pipe 10 feet long 25mm , mcb box 4 way , binding wire , insulation tape , mcb false cover , mcb box double door 12 way , mcb tpn 63 amp , mcb 16 amp , mcb box 6 way , mcb 32 amp sp , saddle 2 way , pvc u clip 25mm , rawal pug 2 inch , black screw 2 inch 100 each , chemical earth set complete as per sample , mcb tpn 100 amp with box , 4 core copper cable 10sqmm , thimble 25mm 35mm , 4 core aluminium 25mm , change over switch 100 amp , cable tie pvc 12 inch , angle 10 feet x1 inch x1 inch , t angle 10 feet x1 foot x1 inch , t angle 24 feet x1 foot x1 inch , ceiling set 24 inch x24 inch , black screw 1 point 25 inch 100 each , wall plug 1 point 25 inch 100 each , banding wire aluminium no 18 , neel powder , thread red , metal scissor taparia , concrete bit 6mm , star bit

State Government

CTN :39344275

21 Feb, 2025 5.43 Lacs

Punalur - Kerala

Tender For filling earth with contractors own earth,solid masonary 30x20x15cm for wall, plastering, painting, pointing, chequerred precast concrete tile for flooring, steel truss and 0.50mm thick gi sheet for roofing,

CTN :39248825

21 Feb, 2025 NA

Rourkela - Odisha

Tender For expression of intrest (eoi) to supply plumbing materials- spindle no-4 , spindle no-3 , spindle- (3/4) , thread seal tape , m seal 100 gm , m seal 50 gm , cpvc solvent-250 ml , white cement -1 kg , iron cutting blade 4" , brass ball valve 15 mm , brass ball valve 32 mm , brass ball valve 25 mm , sch 80 pvc pipe 1" , sch 80 pvc pipe 1.1/2" , sch 80 pvc pipe 1.1/4" , sch 80 pvc pipe 2 , nipple cp 50 mm , waste pipe pvc , pvc connection pipe 24 " , 50 mm pvc pipe , 75 mm pvc pipe , 110 mm pvc pipe , 40 mm pvc pipe , 63 mm pvc pipe , cpvc pipe 3/4" , cpvc pipe 1" , upvc elbow 1.1/2" , upvc elbow 1/2" , upvc elbow 1.1/4 , cp brass r elbow 1"*1/2" , over head shower , cp bib cock , cp angle cock , cp pillar cock , cp push cock , upvc tank nipple 1" , upvc tank nipple 1.1/2" , upvc tank nipple 1.1/4" , upvc socket 1" , upvc socket 1.1/2" , page 5 of 17 , upvc socket 1.1/4" , gi union 15 mm , gi union 32 mm , gi union 25 mm , gi union 40 mm , gi union 1 , gi wire , upvc pipe 1 , upvc pipe 1.1/4 , upvc pipe 1.1/2 , upvc pipe 2 , upvc shocket 2 , tank nipple 2 , drp ss ball valve 15 mm , drp ss ball valve 25 mm , drp ss ball valve 32 mm , cistern handle , cistern ball cock , cistern syphon , gi nipple 1.1/2" * 2" , gi nipple 1.1/4" * 3" , gi nipple 1.1/4" * 4" , gi nipple 1.1/4" * 3" , gi nipple 2" * 3" , upvc ball valve 1" , upvc ball valve 1.1/2" , 1.1/4 upvs ball valve , upvc mta 1" , upvc mta 1.1/2" , upvc mta 2" , upvc mta 1.1/4" , fta 1" , fta 1.1/2" , fta 2" , fta 1.1/4" , upvc union 1" , upvc union 1.1/2" , upvc union 1.1/4" , s s screw 8*38 , s s screw 8*32 , s s screw 10*35 , s s screw 6*25 , s s screw 8*25 , s s screw 10*25 , s s screw 10*50 , s s screw 10*60 , s s screw 6*19 , s s screw 10*35 , grip 8*38 , grip 8*32 , grip 10*35 , grip 6*25 , grip 8*25 , grip 10*25 , grip 10*50 , grip 10*60 , grip 6*19 , grip 10*35 , grip 38mm , grip 30 mm , self drilling screw 25 mm , bond setb 90 gram , bond fit 200 gram , cpvc end cap , 1 cpvc end cap , 1.1/4 cpvc end cap , 1.1/2 cpvc end cap , 2 cpvc end cap , gi clam , gi clamp 1 , commod cover jhonson/seat cover , flushing system 10ltr capacity , health faucet , 2in 1 cp bib cock , 2 in 1 cp angle cock , upvc bush 1.1/2*1/2 , upvc bush 1.1/2*1 , upvc bush 1.1/2*1.1/4 , upvc bush 2 *1.1/4 , upvc tee 1 , upvc tee 1.1/4 , upvc tee 1.1/2 , upvc tee , upvc r. tee 1 * , upvc r tee 1.1/4 *1 , nut bolt washer 63 , nut bolt 5/6 , nut bolt 1/2 , epoxy tile ground , ss soap case , drain cleaner powder , upvc ball valve1.1/2 , 1 upvc ball valve , 1.1/4 upvc ball valve , pvc washer , cyphon washer , cyphon washer , cap plug , cap plug 1 , cap plug 1.1/4 , cap plug 1.1/2 , cp west coupling 1.1/4 , upvc brass elbow , upvc brass socket , cool tap paper , wash basin fisher bolt , screw driver small , screw driver big , black goggle for welder , fevicol for wood filling (200 gram) , wooden cutter wheel4 , iron cutter wheel 4 , iron grinding wheel 4 , welding rod iron , welding rod steel , drill bit concrete 6mm , drill bit concrete 3mm , drill bit wooden 6mm , drill bit wooden 8mm , drill bit iron 6mm , concrete cutter wheel 4 , pvc lebeling pipe , hexa blade , spirit level , concrete nail chaina 03 , concrete nail chaina 02 , concrete nail chaina 1.1/2 , nail 1.1/4 , nail 1 , nail 1.1/4 , nail 2 , nail 6 , nail , ss handle 6 , ss handle 4 , ss tower bolt 4 , ss hinges 5 , ss hinges 3 , auto door closer , floor door stoper 5 , tin cutter blade , glass shelf , ss all drop bolt 250mm , hasp and stapple 4 , knob , ss grating 100mm , universal bracket , anti terinater chemical

CTN :39267979

01 Mar, 2025 45.00 Lacs

Madurai - Tamil Nadu

Tender For tender for supply of construction works for guest bedroom 1 , construct new wall for bedroom using brick or block masonry with intermittent concrete beams , construct new attached bathroom and w or c by using solid blocks and pre fabricated slab for roof in bedroom , construct dressing room , plaster and finish the walls , pvc doors and exhaust fans to be installed for both toilets and bathroom , flooring with athangudi tiles for guest bedroom 1 , remove existing flooring layer and clear out debris , wire brush the floor to remove all loose particles , wash and clean thoroughly with water , spread appropriate tile bedding mortar across the floor and lay the athangudi tiles , pest control treatment for museum room , pest control treatment for credit rooms , pest control treatment for debit rooms , pest control treatment for guest bed room 1 , pest control treatment for guest bed room 2 , pest control treatment for dining hall , pest control treatment for training hall , pest control treatment for suite room , pest control treatment for rear section areas of main building , flooring with athangudi tiles for training hall , remove existing flooring layer and clear out debris , wire brush the floor to remove all loose particles , wash and clean thoroughly with water , spread appropriate tile bedding mortar across the floor and lay the athangudi tiles , admin building and toilet block 36 x 15 , excavation , pcc , rr masonry , rcc , cm brick wall , cement plaster works , back filling , windows or ventilators , floor finishings with cereamic tiles , wall finishings with ceramic tiles , roofing works including framing and tiles finshings , plumbing fixtures , wash basins , urinals , waterclosets , mirror , plinth protection or outdoor flooring , stairs , plumbing and sanitation pie line , chambers and connection to septic tank or soak pit , demolition of existing building 12 x 15 180 sft , demolish and remove walls doors ventilators and roof structures and including foudation , clear the debris , ug sump septic tank or soak pit oht room with additional pumps , oht room size 13 x 18 234 sft , sump size 10 x 12 x 8 960 cft , septic tank 10 x 8 x 6 480 cft , excavation , pcc , rcc or masonry wall or botom slab , rcc slab , waterproofing , manhole with cover , oht 3000l and 2000l and 2000l total 7000l , remove existing roof and tiles wooden boards and rafters and purlins and clearing the debris , removal of window at west side , demolish existing wall to the required height , demolish north side wall due to cracks in the middle and remove the debris , new rcc grade beam at the north wall , building new wall to the required height and close the window opening , providing two window openings , providing opening for slab support at walls , rcc slab for oht base , rc removable slb or cover for well , steps to exit door , existing well cleaning , new floor finshings as per drawing details , upvc water tank 3 numbers with piping and aceesories

Cement Concrete Tile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Trust

State Government

State Government