Latest cement primer Tenders | Government cement primer Tenders

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government/Public Sector

CTN :39420707

13 Mar, 2025 NA

Dakshina Kannada - Karnataka

Tender For supply of red oxide metal primer. is 2074 (1992) items to be supplied in container of 4 liters. , synth. enamel paint po red/g. p enamel items to be supplied in container of 4 liters. , enamel paint-golden yellow items to be supplied in container of 4 liters. , synthetic enamel paint-white/g. p enamel items to be supplied in container of 4 liters. , golden brown enamel paint items to be supplied in container of 4 liters. , cement primer exterior items to be supplied in container of 20 liters , apex paint - light biscuit n 0318 items to be supplied in container of 20 liters , turpentine oil items to be supplied in container of 20 liters , glue gum f/white washing , pale cream colour distemper , black enamel paint to be supplied in container of 20 liters , super lime , synth. enamel paint smoke gray/g. p enamel is 2932 items to be supplied in container of 4 liters. , 4" roller brush , 6'' roller brush , 9'' roller brush

CTN :39093786

22 Feb, 2025 22.00 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of elect and sanitary stores - with louvers , plug top 3 pin 16 amp , plug top 3 pin 6 amp , pvc cable 4 sqmm 2 core copper , pvc cable 6 sqmm 2 core copper , pvc casing capnig t 25mm dia , pvc casing capnig l bend 25mm dia , pvc casing capnig square box 4 inch x 4 inch , pvc ceiling rose 2 oblique 3 terminal , pvc copper cable 1.5 sqmm black green and red sc 90 mtr , pvc copper cable 2.5 sqmm black green and red sc 90 mtr , pvc copper cable 4 sqmm green sc 90 mtr , pvc swich bd 8 inch x 10 inch , pvc switch bd 4 inch x 4 inch , pvc switch bd 4 inch x 6 inch , pvc tape insulation 25 mm wide 9 mtr long , smoke alarm , socket 3 pin 16 amp , socket 3 pin 6 amp , street light led 120w , street light led 60w , sunmica bd with wooden bd 4 inch x 4 inch , sunmica bd with wooden bd 4 inch x 6 inch , sunmica bd with wooden bd 8 inch x 10 inch , switch 15 oblique 16 amp , switch 5 oblique 6 amp , switch socket combination 5 pin 16 amp with gang box , switch socket combination 5 pin 6 amp with gang box , xlpe heavy duty armoured 10 sqmm 2 core aluminum conductor , xlpe insulated heavy duty armoured multi core cable 16 sqmm 2 core , xlpe insulated heavy duty armoured multi core cable 6 sqmm 2 core , computer chair , computer table , office chair , office table 1500 x 900 x 750mm , pvc chair with cushion , acrylic sheet 3 feet x 4 feet x 3mm , acrylic sheet 4 feet x 6 feet x 4mm , adhesiver solution sh , adhesiver solution sr 505 , bow handle oblique door handle , bukhari with complete accessories. , carborator for fd heating device , carborator inlet pipe for bukhari , carborator outlet pipe for bukhari , cement primer , clamp for curtain steel , glass shelf of toughned glass with chromium plated steel frame , cp bib cock 15mm short body , cp bib cock long spout 15 mm , cp stop cock 20mm , cp towel rail 600mm long 20mm dia , curtain ball steel , curtain rod steel , door hinges size 4 inch long medium weight steel , door stopper with isi marked , european wc with s or p trap concealed of size 650 x 405 x 770mm with sheet cover , false ceiling panel 1000 x 3120mm long , fire extinguisher capacity 2 kg alongwith its accessories , corner shelf of toughned glass with chromium plated steel frame , hdpe sand bags , hdpe water storage tank 500 ltr 3 layer , heating rod 2000w , hinges 100mm make spider with isi marked , hydraulic door closer , iron foot scrapper , kero heater batti , looking mirror frameless of size 600x450x5mm with 4mm ply baking , looking mirror with pvc frame 21 inch x 15 inch , m seal 200 gm pkt , mattress good quality size of cushion is 6 feet x3 feet , motor bhatti complete set , ms binding wire not less than 0.9mm dia , nails assorted 0.5 inch to 6 inch , non skid ceramic tiles 300 x 300mm , non skid ceramic tiles 600 x 600mm , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint brush 6 inch , paint red oxide , peg stay , plywood 6 feet x3 feet x 10mm , plywood 6 feet x3 feet x12mm , plywood 8 feet x 4 feet x 4mm , ppgi sheet 10 feet x 3 feet x 0.63mm , ppgi sheet 12 feet x 3 feet x 0.63mm , ppgi sheet 8 feet x 3 feet x 0.63mm , pp-r pipe pn 20 oblique sdr-6 3 layer with outer dia 40mm , pp-r wall clamp dia 32mm with isi mark. , pvc elbow 110mm , pvc elbow 75mm , pvc flushing cistern 10 ltr capacity , pvc pipe 110mm 3 mtr long , pvc pipe 75mm 3 mtr long , pvc socekt 75mm , pvc socket 110mm , pvc tee 110mm , screw full thread 1 inch 75 pices , screw full thread 1 oblique 2 inch 75 pices , screw full thread 2 inch 75 pices , screw full thread 3 inch 75 pices , screw full thread 4 inch 75 pices , self taping screw 1 inch long , self taping screw 2 inch long , self taping screw 3 inch long , silicon tape. , bid details/ 2 / 119 sliding bolt 100mm with isi marked make classic , soap dish chromium plate , ss urinal bowl flat back size of 465 x 355 x 265 mm white colour , stainless steel iwc of size 580mmx440mm with cistern 10 ltrs cap , steel screw 1 oblique 2 inch size full thread 100 nos pkt ,

CTN :39410076

24 Feb, 2025 9.47 Lacs

Jaipur - Rajasthan

Tender For nit 15wall painting multicolor pattern work ,along with scrapping and preparing basewith acrylic cement primer ,and paintingsame with base coat of acryalicemulssion,to obtain smooth and clearfinish,one or more coat followed by patternwork with coat of exterior paint ofapproved brand one or more for even andsmooth finished wall as directed by eng.incharge

CTN :39387314

25 Feb, 2025 10.00 Crore

Muzaffarpur - Bihar

Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :39402276

01 Mar, 2025 50.00 Lacs

Amroha - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab - vocational lab; teacher training; buyer - applicator brush , hydraulic arm chair with footrest , blackhead remover , body massage bed , bowles , curling iron (curling tong) , cutting scissors , decorative pins boxes , wax heater , dustbin , exfoliation machine , eyebrow pencil sharpener , facial steamer , foot scraper , foot spa , galvanic machine , hair brush , hair connector , hair dresser chair/stool , hair dryer , hair steamer , hand mirrors , infrared lamp , jumbo rollers set , large stools , magnifying glass , make up palate , manicure/pedicure set , manicure table , measuring cup and spoon sets , measuring glass sets , modular mirrors , paraffin heater , perming cap , pin curl clips boxes , razor with blade , roller brush set 5 in 1 , shampoo unit , small scissors , small stools , spatula , spray bottle , sterilizer , stone therapy set , straightening iron , hair dye brush coloring kit , tweezer , working and facial trolleys , writing board (with stand) with white board marker , and duster , all in one eyelash brush/comb , all purpose comb , barber brush , bleach brush , complete make up brushes set , cutting sheets , frosting cap , nail paint , tissue box , hand sanitizer , garbage bin/bags , mop , large tooth comb , ladies/kids cut catalogues , eyebrow thread , wax strips , cold wax , paraffin wax , massage cream , pedicure scrub pack , pumic stone , manicure and pedicure shampoo , hair shampoo , hair spray(medium hold) , nail paint remover , nail base coat/ top coat , cotton wool , bob pin, u pin, invisible pin , stuffing/ donut , rubber band , barber razor , lipstick pallet , blusher pallet , eye liner , mascara , cleansing milk , moisturizer , face pack , face scrub , bindi (assorted) , makeup primer , gown , apron (with front pockets) , towels (full size) , disposable hand gloves , medium and small hand towell , desktop , internet access , seize fire extinguisher , first aid kit , iron almirah , tailor scale l curve , tailor scale hip curve , tailor scale yard stick , tailor scale french curve , woodne cutting table , sewing gauge , skirt hem maker , male, female & kid dress form standard size , tracing wheel , fabric scissor (10 no) , pinking shears , hand sewing machine woodne base and , steel/plastic , sewing machine (traedle) , single needle ubt (industrial machines) , steam iron , iron , press board , display board (44ft) and with board , hanger stand 1 , mirror , sitting stool , screw driver set (6 pieces) , screw driver set (star type & flat type) , long nose pliers , combination pliers , sewing kit , overlock machine , pattern notcher , pattern master , paper cutting scissors , metal scale - 1 metre (100 cm) , embroidery threads (good brands) , stain remover gun , writing board with white board marker and duster , measurement tape , brown sheet , yellow carbon paper , muslim cloth , seam rippers , thread clipper , hand needles, machine needle (all size) , machine thread (all colors) , bobbin and bobbin case (according to machine , type) , macnine oil , oil keeps , plastic box/basket all size , embroidery frames , fabric marking chalk (tailor chalk) , basic stationary items , first aid box , auger , dutch hand hoe , hori hori knife , long handle hoes , garden hand tools , garden hoes , garden rakes , garden/digging fork , garden/digging spade , rabbiting spade , hand screens/sieves , onion hoe , knapsack sprayer , leaf rake , levelers , garden pruning saw , pruners , pruning knife , secateurs , specialty spades (shovel) , soil scoop , sprinkler irrigation unit , trowels , watering can , plastics baskets , water hose , seed cleaner , seed treating equipment , plug trays , ph meter , power tiller , wheel borough/cart , khudali , soil testing kit , models of tractor implements used in crops , bucket knapsack , hand automizer sprayer , pheromone trap for major insect pest (available in , local market) , rotation drum , charts related

CTN :39406376

25 Feb, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For language lab establishment at diet u s nagar - computer 1.11th gen intel core i3-1215 2.8gb ram 3.500 gb hdd 4.windows 11 and microsoft office 21 5. 21.5 screen (monitor) 6.keyboard 7.mouse 8.ups input voltage (standard range) 100 v - 300 v; charging current (standard) : 10 amps 1 amps, output power- 760 watts. rated capacity- 600 va; efficiency (battery mode) > 80%.backup 45 minutes. offline ups 9. wireless mic with noise cancellation, bluetooth 4.1 csr chip; 10m wireless range; 8 hours of talk-time; universal earphone; rotatable earbud; hd mic; lightweight,90mah li-polymer battery; 200hrs of standby time; 1.5 hours charging time; micro usb charging cable included, transmission distance : up to 10 meters from the paired device frequency range : 20hz-20khz impedance: 32 ohms 10 projector 11 projector screen 6x4 (with sitc), digital content (software) licence of the software is valid for 3 years.server based protocol with all the aspects of grammar, speaking, comprehension, recording etc. caters to all levels: basic to advanced . based on the dynamic immersion principle, which emphasizes natural learning. there is no forced learning. speech recording password security to separate teachers and students workspace clear and comprehensive reporting system, flyers ,posters related to english language the lab should be equipped with kids story books and comics interesting wall paintings and drawing related to english language and literature to catch the imagination of the students two soft board (6 * 3 ), creative interior conceptualisation with materials : flooring feet mat with fixing with chemical including all labor charges ( 500 square feet) ., lighting 1. power points 2.switch points 3.ordinary points wire as per requirement - electrical points - ac points (wire 4mm with branded switch and wire, complete with switches, wire and fixing and accessories, power point 2.5 mm wire and switch of branded company ,complete with fixing) electrical points - ordinary points (1.5 mm and 1 mm wire complete with switch board and all accessories) 4.wall fans 5.tube light with fixing 24 watt led tube, painting (2000 sq feet) complete wall and ceiling with two coats of putty & primer and 2 coat of enamel paint. complete work with fixtures. one outer wall should be designed and decorated as per theme of english lab with acrylic sheet sign board of english lab.(with sitc), furniture : 5 computer table, 5 students chair - frame made up of crc pipe, 16 quage pipe od 19*38 sitting height 18 total height chair 30 powder coated frame. blow mould seat and back (room sitting plan may vary as lab setting ), one.teacher table size 3 *2 *2.5 one drawer and one door frame 18 mm pre laminated particle board pasted from through feed 2mm rehau beading top thickness 25mm pasted with 2mm rehau beading, one teacher chair mid back revolving chair, mesh chair tilt mechanism,crome base pp arm rest (with sitc), offline teacher training of minimum 70 teachers and online support for at least one year., other accessories : installation kit /vga/hdmi. (with sitc)

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

Cement Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector