Latest cement primer Tenders | Government cement primer Tenders

Central Government/Public Sector

CTN :39420707

13 Mar, 2025 NA

Dakshina Kannada - Karnataka

Tender For supply of red oxide metal primer. is 2074 (1992) items to be supplied in container of 4 liters. , synth. enamel paint po red/g. p enamel items to be supplied in container of 4 liters. , enamel paint-golden yellow items to be supplied in container of 4 liters. , synthetic enamel paint-white/g. p enamel items to be supplied in container of 4 liters. , golden brown enamel paint items to be supplied in container of 4 liters. , cement primer exterior items to be supplied in container of 20 liters , apex paint - light biscuit n 0318 items to be supplied in container of 20 liters , turpentine oil items to be supplied in container of 20 liters , glue gum f/white washing , pale cream colour distemper , black enamel paint to be supplied in container of 20 liters , super lime , synth. enamel paint smoke gray/g. p enamel is 2932 items to be supplied in container of 4 liters. , 4" roller brush , 6'' roller brush , 9'' roller brush

State Government

CTN :39422405

15 Mar, 2025 NA

Imphal - Manipur

Tender For supply of furniture items to 120 government high and higher secondary schools, which shall be valid for 1 (one) year . - additional classroom - furniture, students wooden desk:dimension of desk: 2.6 x 6 x 1.4 ft.material: desk should be made from the a grade quality wood. finishing: applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work. book shelf of 8 inch spacing at the desk and 12 inch breath., students bench:dimension of bench: 1.6 x 6 x 1.1 ft.material: bench should be made from the a grade quality wood. finishing: applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., teachers table:dimension: 3x2x26"material: table should be made from the a grade quality wood.finishing: applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., teachers chairdimension of chair: height of back support measuring from ground: 3 height of seat: 16" dimension of seat: 17"x13"material: chair should be made from the a grade quality wood.finishing : applying ready mixed priming coat pink primer of approved quality on wood work. burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., dust bin: dimension: 1.6 x 2 x 1 ft., material: dust bin made from the finest quality uningthou wood. finishing: applying ready mixed priming coat pink primer of approved quality on wood work., white board, 5 duster & marker pen (one dazon):dimension: width 6 ft., height 4 ft.white board type non magneticmelamine surface the surface of this whiteboard should be made using high quality melamine which ensures smooth writing experience and easy cleaning. high pressure laminate coatedthis whiteboard should be coated with high pressure laminate that helps to write effortlessly and clean comfortably., library room - furniture, library desk:dimension of desk: 2.6 x 6 x 1.4 ft.material: desk should be made from the a grade quality wood. finishing: applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work. book shelf of 8 inch spacing at the desk and 12 inch breath., library bench:dimension of bench: 1.6 x 6 x 1.1 ft.material: bench should be made from the a grade quality wood. finishing: applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., white board, 5 duster & marker pen (one dazon):dimension: width 6 ft., height 4 ft.white board type non magneticmelamine surface the surface of this whiteboard should be made using high quality melamine which ensures smooth writing experience and easy cleaning. high pressure laminate coatedthis whiteboard should be coated with high pressure laminate that helps to write effortlessly and clean comfortably., teachers table:dimension: 3x2x26"material: table should be made from the a grade quality wood.finishing : applying ready mixed priming coat pink primer of approved quality on wood work.burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., teachers chairdimension of chair: height of back support measuring from ground: 3 height of seat: 16" dimension of seat: 17"x13"material: chair should be made from the a grade quality wood.finishing : applying ready mixed priming coat pink primer of approved quality on wood work. burnishing two more coats with superior copal burnish of approved quality i/c sizing on new work., dust bin: dimension: 1.6 x 2 x 1 ft., material: dust bin made from the finest quality uningthou wood. finishing: applying ready mixed primi

CTN :39421586

13 Mar, 2025 26.41 Lacs

Bareilly - Uttar Pradesh

Tender For supply of misc items - aluminium door handle 100mm , aluminium door handle 125mm , aluminium door handle 150mm , aluminium door stopper single rod with rubber bush , aluminium sliding door bolt aldrop 200mm long , aluminium tower bolts 100mm , aluminium tower bolts 150mm , aluminium tower bolts 200mm , brass bib tap 15mm internal thread , brass gate ball valve size 15mm , brass gate ball valve size 20mm , brass gate ball valve size 25mm , brass spindle square type 15mm , brush paint 25mm , brush paint 50mm , brush paint 75mm , cp connection 15mm bore , cp d type handle 100mm , cp d type handle 75mm , cp extension nipple 15mm 1 inch external thread , cp extension nipple 15mm 1.5 inch external thread , cp extension nipple 15mm .75 inch external thread , cp grating 100mm , cp grating 125mm , cp grating 150mm , cp stop cock 20mm external threaded , cp stop cock 20mm internal thread , cp waste coupling 32mm , curtain rod bracket 25mm dia , curtain rod knob 25mm dia , cushion for sofa set size 21inchx22inchx4inch thick with coverd fabric , door closer aluminium body hydraulically regulated designation no 3 universal type suitable for door shutter of weight 61 to 80 kgs , foam sheet 6ftx3ftx100mm , foam sheet 6ftx3ftx75mm , galvanized mild steel wire mesh 0.50 nominal dia of wire and average width of aperture 1.18mm and 1.2 mtr wide , gl bend medium with one socket screwed 15mm dia , gl elbow medium grade 15mm dia isi marked , gl elbow medium grade 20mm dia isi marked , gl elbow medium grade 25mm dia isi marked , gl elbow reducing medium grade isi marked size 20 x15mm , gl elbow reducing medium grade isi marked size 25 x15mm , gl hex nipple 15mm , gl hex nipple 20mm , gl nipple medium grade 15x100 mm long , gl nipple medium grade 15x150 mm long , gl nipple medium grade 15x200 mm long , gl nipple medium grade 15x300 mm long , gl nipple medium grade 15x75 mm long , gl nipple medium grade 20x100 mm long , gl nipple medium grade 20x150 mm long , gl nipple medium grade 20x75 mm long , gl nipple medium grade 25x100 mm long , gl nipple medium grade 25x75 mm long , gl socket medium grade isi marked 15mm , gl socket medium grade isi marked 20mm , gl socket medium grade isi marked 25mm , gl socket reducer 20x15mm , gl socket reducer 25x15mm , gl socket reducer 25x20mm , gl tee equal medium grade screwed isi 15mm , gl tee equal medium grade screwed isi 20mm , gl tee equal medium grade screwed isi 25mm , gl tee reducing medium grade isi 15x20mm dia , gl tee reducing medium grade isi 15x25mm dia , gl union medium grade complete isi marked 15mm , gl union medium grade complete isi marked 20mm , gl union medium grade complete isi marked 25mm , handle soft pu for chair revolving , knob anodoised 25mm with screws for drawer , knob anodoised 32mm with screws for drawer , lock brass for drawer with keys for table steel , lookig mirror of size 450 x 600 x 5mm thick with 9mm plywood back and aluminium beading , looking mirror 5mm thick with ply wood back 9mm thick 375x1200mm , looking mirror 5mm thick with ply wood back 9mm thick 375x750mm , plywood bwr commercial grade of size 7ftx3ftx12mm , plywood bwr commercial grade of size 8ftx4ftx12mm , plywood bwr commercial grade of size 8ftx4ftx4mm , plywood bwr commercial grade of size 8ftx4ftx6mm , plywood general purpose one side teak face bwr commercial grade of size 8ftx4ftx4mm , plywood general purpose one side teak face bwr commercial grade of size 8ftx4ftx6mm , prelaminated mdf board, size 8ftx4ftx18 or19 mm th , ptmt flushing pipe for low level flushing cistern 32mm dia , ptmt grating 100mm dia , ptmt grating 125mm dia , ptmt grating 140mm dia , ptmt grating square 150mm with hole , ptmt stop cock 15mm external thread , ptmt stop cock 15mm intenal thread , pvc cabinet mirror for bathroom , pvc cistern fitting kit complete for low level flushing system , pvc float valve 15mm with fitting , pvc float valve 20mm with fitting , pvc seat for chair dinning map , pvc towel rail 450mm , red oxide primer 1st qu

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

CTN :38661943

24 Feb, 2025 NA

Chandigarh - Chandigarh

Tender For bid to ras bid to ras supply of misc items - dr fixit pidilite urp in 01 ltr packing , dr fixit 01l silicon , dual directional reflective speed raising breaker 3 meter long 03 black 03 yellow breakers with installation with raising , gi wooden screw 15 mm 200 nos in pkt , gi wooden screw 20 mm 200 nos in pkt , gi wooden screw 25 mm 200 nos in pkt , gi wooden screw 30mm 200 nos in pkt , gi wooden screw 35 mm 200 nos in pkt , gi wooden screw 50 mm 200 nos in pkt , liquid rubber solutionfor water prooofing with reinforcement fabric , paint enamel in one ltr packing af blue , plain glass 3ft x 6ft 3mm thick , pvc bend pipe for low level cistern 32mm , pvc internal fitting kit for low level cictern complete , pvc lid for oht cap 500 ltr , steel screw 13 to 6 pack of 500 pcs , steel screw 19 to 6 pack of 500 pcs , steel screw 19 to 8 pack of 500 pcs , steel screw 25 to 6 pack of 500 pcs , steel screw 32 to 8 pack of 500 pcs , solar sparkle cat eye of aluminium pressure die casted body of size 115 x 100 x 22 mm as per required , thread cotton , white cement grout , window glass sheet 3mm thick 4ft x3ft plain , capacitor 2.5 mfd , empire tape 20mm , high pressure cut off switch for ac , ht insulation tape 20mm , insulation tape 20mm x 25mtr , insulation tape 25mm x 25mtr , mcb tpn 100 amp , pvc casting caping round size 19 or 20mm double lock , step fan regulator 2 module , aluminium thimble of size 35sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 95sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 70sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 240sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 400sqmm dowells or barco or jainson lugs or comet lugs , sheet metal enclosure with provision of mccb 200 or 250 amps 4 pole as incomer and mcb sp and tp out going , cupboard wooden knobs in carved design , cusioned seat and back set with ply and latherite tapestry cloth for revolving chair executive trade pattern , favicol sh , glue synthetic or rubber adhesive pidilite sr 505 , paint enamal black apcolite premium satin from aianpaints , paint enamal smoke grey apcolite premium satin from aianpaints , red oxide primer in one ltr packing , stanless steel counsil handle one side for shutters. 100mm in rose gold finish , stainless steel hydraulic hingers 0 deg crank 4 holes for soft closing of cabinet doors , sand paper multignt 60 to 220 , ss304 t beading 10 mm rose gold finish , botton mount soft closing telescope channels for drawers size 10 inch in powder coated finish or zn plating , thinner in one ltr packing , touch wood for polish , turpentine oil , wood adhesive for pvc edge banding fevicol probond edgelock in tubes of 140g , ht heat shrinkable jointing kit outdoor 70 to 120 sqmm , ht heat shrinkable jointing kit indoor 70 to 120 sqmm

CTN :39093786

22 Feb, 2025 22.00 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of elect and sanitary stores - with louvers , plug top 3 pin 16 amp , plug top 3 pin 6 amp , pvc cable 4 sqmm 2 core copper , pvc cable 6 sqmm 2 core copper , pvc casing capnig t 25mm dia , pvc casing capnig l bend 25mm dia , pvc casing capnig square box 4 inch x 4 inch , pvc ceiling rose 2 oblique 3 terminal , pvc copper cable 1.5 sqmm black green and red sc 90 mtr , pvc copper cable 2.5 sqmm black green and red sc 90 mtr , pvc copper cable 4 sqmm green sc 90 mtr , pvc swich bd 8 inch x 10 inch , pvc switch bd 4 inch x 4 inch , pvc switch bd 4 inch x 6 inch , pvc tape insulation 25 mm wide 9 mtr long , smoke alarm , socket 3 pin 16 amp , socket 3 pin 6 amp , street light led 120w , street light led 60w , sunmica bd with wooden bd 4 inch x 4 inch , sunmica bd with wooden bd 4 inch x 6 inch , sunmica bd with wooden bd 8 inch x 10 inch , switch 15 oblique 16 amp , switch 5 oblique 6 amp , switch socket combination 5 pin 16 amp with gang box , switch socket combination 5 pin 6 amp with gang box , xlpe heavy duty armoured 10 sqmm 2 core aluminum conductor , xlpe insulated heavy duty armoured multi core cable 16 sqmm 2 core , xlpe insulated heavy duty armoured multi core cable 6 sqmm 2 core , computer chair , computer table , office chair , office table 1500 x 900 x 750mm , pvc chair with cushion , acrylic sheet 3 feet x 4 feet x 3mm , acrylic sheet 4 feet x 6 feet x 4mm , adhesiver solution sh , adhesiver solution sr 505 , bow handle oblique door handle , bukhari with complete accessories. , carborator for fd heating device , carborator inlet pipe for bukhari , carborator outlet pipe for bukhari , cement primer , clamp for curtain steel , glass shelf of toughned glass with chromium plated steel frame , cp bib cock 15mm short body , cp bib cock long spout 15 mm , cp stop cock 20mm , cp towel rail 600mm long 20mm dia , curtain ball steel , curtain rod steel , door hinges size 4 inch long medium weight steel , door stopper with isi marked , european wc with s or p trap concealed of size 650 x 405 x 770mm with sheet cover , false ceiling panel 1000 x 3120mm long , fire extinguisher capacity 2 kg alongwith its accessories , corner shelf of toughned glass with chromium plated steel frame , hdpe sand bags , hdpe water storage tank 500 ltr 3 layer , heating rod 2000w , hinges 100mm make spider with isi marked , hydraulic door closer , iron foot scrapper , kero heater batti , looking mirror frameless of size 600x450x5mm with 4mm ply baking , looking mirror with pvc frame 21 inch x 15 inch , m seal 200 gm pkt , mattress good quality size of cushion is 6 feet x3 feet , motor bhatti complete set , ms binding wire not less than 0.9mm dia , nails assorted 0.5 inch to 6 inch , non skid ceramic tiles 300 x 300mm , non skid ceramic tiles 600 x 600mm , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint brush 6 inch , paint red oxide , peg stay , plywood 6 feet x3 feet x 10mm , plywood 6 feet x3 feet x12mm , plywood 8 feet x 4 feet x 4mm , ppgi sheet 10 feet x 3 feet x 0.63mm , ppgi sheet 12 feet x 3 feet x 0.63mm , ppgi sheet 8 feet x 3 feet x 0.63mm , pp-r pipe pn 20 oblique sdr-6 3 layer with outer dia 40mm , pp-r wall clamp dia 32mm with isi mark. , pvc elbow 110mm , pvc elbow 75mm , pvc flushing cistern 10 ltr capacity , pvc pipe 110mm 3 mtr long , pvc pipe 75mm 3 mtr long , pvc socekt 75mm , pvc socket 110mm , pvc tee 110mm , screw full thread 1 inch 75 pices , screw full thread 1 oblique 2 inch 75 pices , screw full thread 2 inch 75 pices , screw full thread 3 inch 75 pices , screw full thread 4 inch 75 pices , self taping screw 1 inch long , self taping screw 2 inch long , self taping screw 3 inch long , silicon tape. , bid details/ 2 / 119 sliding bolt 100mm with isi marked make classic , soap dish chromium plate , ss urinal bowl flat back size of 465 x 355 x 265 mm white colour , stainless steel iwc of size 580mmx440mm with cistern 10 ltrs cap , steel screw 1 oblique 2 inch size full thread 100 nos pkt ,

CTN :39410076

24 Feb, 2025 9.47 Lacs

Jaipur - Rajasthan

Tender For nit 15wall painting multicolor pattern work ,along with scrapping and preparing basewith acrylic cement primer ,and paintingsame with base coat of acryalicemulssion,to obtain smooth and clearfinish,one or more coat followed by patternwork with coat of exterior paint ofapproved brand one or more for even andsmooth finished wall as directed by eng.incharge

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

Cement Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government