Latest ceramic fibre insulation Tenders | Government ceramic fibre insulation Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38568107

20 Jan, 2025 NA

Bhusawal - Maharashtra

Tender For supply of operating rod insulator for 25 kv isolator, (r.i. 6260), (c.d. 850 mm) as per rdso spec ification no. ti/spc/ohe/ins/0071 or latest (as on date of opening of tender). [ warranty period: 30 months after the date of delivery ]

CTN :38582060

27 Dec, 2024 NA

Ganjam - Odisha

Tender For transportation of 245 kv 160 kn porcelain long rod insulator from store s/d choudwar to line s/d store bhanjanagar under eht (o&m) division, bhanjanagar and transportation of various materials from mancheswar store to 132/33 kv grid s/s, chatrapur under eht (o&m) division, chatrapur

CTN :38555933

03 Jan, 2025 NA

Siang - Arunachal Pradesh

Tender For supply of air filter , thermostat assy , fan belt auxiliar drive , master cylinder assy , slave cylinder assy , tie rod end outer , ball joint upper , ball joint lower , insulator engine front , hose brake lh frt , fuel line tank and filter , front wiper with imported rubber

State Government

CTN :38503386

31 Dec, 2024 30.87 Lacs

Medininagar - Jharkhand

Tender For supply of electric materials under electric supply area medininagar - electrical items :, 33kv v cross arm (100x50x6mm galvanized 19.7 kg), 33kv line dp channel (100x50x6m galvanized 65.2 kg), 33kv pole top bracket (50x10mm galvanized 2.5 kg), 33 back/support clamp for v cross/top (1.6 kg each 50x10 mm galvanized), 33kv g i stay set (1900x20mm) complete with stay wire 7/10 galvanized and guy insulator, 11kv v cross arm (75x40x6mm galvanized 14.6 kg), 11kv line dp channel (75x40x6mm galvanized 41.3 kg), 11kv pole top bracket (50x8mm galvanized 2.2 kg), 11kv back clamp for v,top,dp (50x6mm galvanized 3 kg), 11 kv g.i stay set (1800x16mm) with stay wire 7/10 galvanized and guy insulator, channel for transformer base (100x50x6mm galvanized 52.63 kg), channel for transformer hg fuse set (75x40x6mm galvanized 19.3 kg), channel for transformer ab switch (100x50x6mm galvanized 52.63 kg), tr. belting (50x50x6mm) with support (40x40x6mm galvanized 52.3 kg), lt stay set (1700x16mm) complete with stay wire 7/12 galvanized, earth clamp for earth wire (50x6mm galvanized 1.8 kg), angle/side stay clamp (50x6mm galvanized 1.08 kg), lt angle bracket (50x50x6mm galvanized 4.75 kg), lt back clamp for lt angle (50x6mm galvanized 1.1 kg), m/s nuts & bolts (10 x5/8 half thread), m/s nuts & bolts (8 x5/8 half thread), m/s nuts & bolts (5 x5/8 full thread), m/s nuts & bolts (3 x5/8 full thread), m/s nuts & bolts (2 x5/8 full thread), clamp for dss as per field req. (50x6mm galvanized 3.2 kg), spike earthing made of (20 mm gi solid rod

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

State Government

CTN :38500104

27 Dec, 2024 34.05 Lacs

Lucknow - Uttar Pradesh

Tender For supply of ohe spares required for traction dept upmrc lucknow - anchor backing angle for 8 x 8 mast , anchor backing angle for b_200 mast , clevis 5040 , double strap 5030 , distance rod 5183 , distance rod special 5183 spl , compensating plate 5191 , equalising plate 5192 , guy rod anchor loop , anchor v_bolt , guy rod stirrup , 25 mm dia guy rod of length 7.0 metres , 25 mm dia guy rod of length 6.95 metres , 25 mm dia guy rod of length 5.14 metres , 25 mm dia guy rod of length 4.22 metres , guy rod double strap assembly 5222 , pg clamp 1030_3 , catenary wire splice , opc wire splice , pg clamp 1541 , pg clamp pg_13 , opc suspension clamp , mast bracket fitting assembly 150 , mast bracket fitting assembly 200 , fitting for hook insulator , tubular stay sleeve forged , tubular stay adjuster , hook bracket top and bottom , standard antiwind clamp assembly tramway , large catenary direct clamp top and bottom , large catenary suspension bracket top and bottom , pg clamp 1041_2 , 16 x 50 gi nut bolt with washer lock nut , rivet 20 x 60 gi , rivet 20 x 55 gi , 10 x 65 mm full threaded gi nut bolt with washer lock nut , gi rivet 16 x 55 , gi rivet 20 x 55 , snap head al alloy rivet 4 x 35 mm , aluminium alloy rivet dia 6 x 35 mm , dia 6 x 65 copper rivet , ss split pin 10 x 35 mm , 20 x 65 mm full threaded gi nut bolt with washer lock nut , 20 x 50 mm full threaded gi nut bolt with washerlock nut , 20 x 85 mm full threaded gi nut bolt with washerlock nut , 10 x 35 mm half threaded gi nut bolt with washer lock nut , 10 x 65_30 mm half threaded ss nut bolt with washer lock nut , 10 x 35_30 mm full threaded ss nut bolt with lock nut , 10 x 35_30 mm full threaded ss stud bolt with lock nut , ss u_bolt dia 10 mm with washer nuts , 10 mm ss lock nut , gi bolt dia 16 x 220_57 , tool box with tools , discharge rod , double ladder , 25kv 1250amps double pole air break off-load type isolator_suitable for outdoor horizontal mounting and conforming to rdso specification no.eti_ohe_16 1_94 rev_1 with manual operating mechanism , 25kv 1250amps single pole air break off load type isolator_suitable for outdoor horizontal mounting and conforming to rdso specification no.eti_ohe_16 1_94 rev_1 with manual operating mechanism , 25kv 1250amps single pole air break off load type isolator_suitable for outdoor horizontal mounting and conforming to rdso specification no.eti_ohe_16 1_94 rev_1 with motor operating mechanism

State Government

CTN :38474009

28 Dec, 2024 NA

Ramban - Jammu And Kashmir

Tender For supply of lightning arrestor , heat shrinkable cable kit , mcb tpn , aluminium thimbles , tripping coil , closing coil , main switch changeover , ht bus rod , insulation tape , cotton tape , led lamp 15w or 40w , led street light 70w , led batten tube light 20w, 4 feet , mcb sp c type , do set , pvc wire , aluminium service cable , 11 kv pin insulator , 11 kv g.i. pins , 11kv disc insulator 45 kn , 11 kv go set , screw driver set , plier , t- spanner , ring spanner , allen key , hand gloves 11 kv , hand gloves 33 kv , pulley with hook , acsr come along clamp , iron kadhai , shovel , tong tester , crc spray , wire cutter stripper , oil pump

State Government

CTN :38311696

06 Jan, 2025 7.47 Crore

Jabalpur - Madhya Pradesh

Tender For tender for replacement of old disc insulator strings of various ehv transmission lines of mpptcl by polymer long rod insulator and porcelain disc insulator strings at pilot locations on total turnkey basis (tr-46/2024)

Central Government And Public Sector

CTN :38466787

23 Dec, 2024 NA

Bilaspur - Chhattisgarh

Tender For supply of operating rod insulator for 25 kv isolator (ri 6260) as per rdso spec: ti/spc/ohe/ins/ 0071 make core approved vendor. [ warranty period: 30 months after the date of delivery ]

Ceramic Fibre Insulation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government

Central Government And Public Sector