Latest ceramic wall Tenders | Government ceramic wall Tenders

CTN :39586867

17 Mar, 2025 27.40 Lacs

Kota - Rajasthan

Tender For upgradation of 1004 gpra type ii quarters at nanakpura new delhi (sh providing kota stone in risers and treads, wall tiles and finishing work in stair case)

State Government

CTN :39600758

24 Mar, 2025 2.12 Lacs

Delhi - Delhi

Tender For removing poster, finishing and painting work on boundary wall from maurice nagar to patel chest, university of delhi

State Government

CTN :39565418

13 Mar, 2025 4.97 Lacs

Dharamshala - Himachal Pradesh

Tender For repair and restoration of type v residential building at chilgari - wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., painting one coat (excluding priming coat) on previously painted wood and wood based surface with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other foreign matter sand papering and stopping with ready mixed paint other than white complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., painting one coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint, brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter:- with readymixed paint other than whiten complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing panelled,glazed or panelled and glazed shutters for doors, windows and clere storey windows including black enamelled iron but hings with necessary screws 40mm thick in 1st class deodar wood. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing wire gauge shutters using galvanised m.s. wire gauge of i.s. gauge designation 85g. with wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw 40mm thick (1st class deodar wood). complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works .complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of grith upto 30 cm. measured at a height of 1 metre above ground and removal of rubbish upto a distance of 20 metres outside the periphery of the area cleared. complete in all respects as per direction and to the entire satisfaction of engineer-in-charge witnin all leads and lifts., brick work using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( 1 cement : 6 sand ) ist class bricks. complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts.

State Government

CTN :39554259

07 Mar, 2025 NA

Narwana - Haryana

Tender For quotation for na interior finishing, na exterior finishing wall and roof surfaces, copper wiring in pvc conduit (surface/recess), ms conduit pipe only (surface or recessed) for electrical points 4.3. ms conduit, na finishing works, b brick work

CTN :39237206

07 Mar, 2025 NA

Delhi - Delhi

Tender For corrigendum : tender for supply of placing ornamental furniture at 20 akbar road new delhi - providing & placing in position wooden tv wall panel of size approx 1740mm x 2440mm ht x 50mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel , panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the exposed panel with the help of 25 x 10mm teak wood bidding , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent the cost including all necessary nails screws fevicol etc all complete as per the direction of engineer in charge , providing & placing in position wooden tv wall panel of size approx 2400mm x 2440mm ht x 45mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the half exposed panel with the help of 25x10mm teak wood bidding and othe half portion shall be consisting of 1mm thick laminate as per approved shade , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent , the cost including all necessary nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing & placing of wooden wall panelling with fluiting design having 2 nos. door shutter , panelling of size approx 4460x3100mm ht , , providing & placing in position wooden tv wall panel of size approx 2345x2345mm , having bottom cabinet of size approx 2045x375x260mm ht. and open shelve cabinet of size approx 380x415x2345mm ht , , providing & placing in position wooden vanity counter of size approx 1520x540x580mm ht as per approved design and drawing , the vanity top , bottom , sides , shelve , middle partition , drawer head shall be made up of 19mm thick commercial ply of make duro/green or equivalent , , providing & placing in position wall hung wooden cabinet of size approx 2400x360x270mm ht , as per approved design , the cabinet top , bottom , side , shelve , middle partition , drawer head , unit back shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent , , providing & placing in position wooden vanity counter of size approx 1535x665x870mm ht , as per approved design , the vanity top , bottom , side , front fix , drawer head , partition , shelve , upper box unit shall be made up of 18mm thick hdhmr ply of make action tesa , providing & placing in position wooden vanity counter of size approx 2240x550x710 mm ht , , providing & placing in position wooden vanity counter of size approx 820x600x560mm ht , as per approved design , providing & placing in position wooden vanity cabinet of size approx 1525x610x580mm ht. as per approved design , the cabinet top , bottom , providing & placing in position wooden vanity counter of size approx 2470x610x640mm ht , as per approved design , the cabinet top , bottom , side , partition , shutter , drawer head , , providing & placing in position wooden tv unit of size approx 3400mm x 540mm x 2360mm ht , as per approved design , the tv unit shall be having 2 nos wardrob with shutter on both side and cabinet with shutter on bottom , providing & placing in position wooden side table of size approx 460mm x 400mm x 530mm ht , as per approved design , the table top , bottom , side , drawer head , skirting shall be made up of 18mm thick hdhmr ply of action/tesa or equivalent make , providing & placing in position wooden side table of size approx 540mm x 460mm x 540mm ht , as per approved design , the table top , bottom , side

Central Government And Public Sector

CTN :38874243

05 Mar, 2025 53.10 Lacs

Nashik - Maharashtra

Tender For bid to ras corrigendum : supply of transportation of dismantled 2 no. ac units upto 20 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units upto 20 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 2 no. ac units from 21 km to 50 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 21 km to 50 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 2 no. ac units from 51 km to 100 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 51 km to 100 km with all accessories incl. hiring of vehicle, manpower etc , transportation of dismantled 3no. to 5 no. ac units from 100 km upto 200 km with all accessories incl. hiring of vehicle, manpower etc , itc of 1.5 or 2tr window ac unit with properly finshing and minor civil work , itc of wall mounting type 1.5 or 2tr split ac unit with properly finishing and minor civil work , itc of 2x1.5 tr high sensible ac unit with properly finishing and minor civil work , s and f of 1 by 4 inch copper refrigeration pipe , s and f of 3 by 8 inch copper refrigeration pipe , s and f of 1 by 2 inch copper refrigeration pipe , s and f of 5 by 8 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 1 by 4 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 3 by 8 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 1 by 2 inch copper refrigeration pipe , p and w of expanded polyethylene foam tube insulation for 5 by 8 inch copper refrigeration pipe , s and f of prefabricated powder coated heavy duty iron stand having projection arm minimum 600 mm , s and fabrication of m.s. frame made out of various m.s. sections incl. hardwares finishing, painting, minor civil work etc , p and f of 12mm thick prelaminated particle board with decorative lamination on both side flat pressed 3 layer or graded wood particle board , s and l of 4 x 1.5 sq mm copper conductor unarmoured cable of 1.1 kv grade isi mark , s and l of 3 x 2.5 sq mm copper conductor unarmoured cable of 1.1 kv grade isi mark , s and f of 20 mm dia heavy gauge rigid upvc pipe of isi mark , s and f of 25 mm dia heavy gauge rigid upvc pipe of isi mark , s and l of 3 x 2.5 sq mm copper conductor armoured cable of 1.1 kv grade isi mark , s and m end termination with brass compression gland for 3 x 2.5 sq mm size of pvc insulated pvc sheathed or xlpe cu condr armd cable , s and f of 2 way spn mcb db , s and f of 5a to 32a 10ka c curve sp mcb , s and f of 5a to 32a 10ka c curve spn mcb , s and f microprocessor based energy saver unit for controlling the operation of 2 a.c. unit having safety protection, disply, auto, manual mode , repairing of faulty ac controller of ac unit , sand f of electronic ac voltage stabilizer suitable for operation on 130volt to 290 volt for 1.5tr ac unit , installation of spn or tpn mcb db , fixing of sp or spn or dp or tp or tpn or fp mcb , fixing of outdoor condensor stand , fixing of both size of refregerent piping but without heatlone tube , laying of 2 or 3 or 4 core copper conductor armoured or unrmoured cable up to size 4 sq mm. , fixing of cyclic timer , fixing of 20mm or 25mm dia drain water pvc pipe.

Central Government/Public Sector

CTN :39527490

21 Mar, 2025 44.51 Lacs

Kolkata - West Bengal

Tender For construction of community centre at murgaghutu and kadma village under csr - clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared , earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point 5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1 point 5 m as directed by eic , filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1 point 5 m , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specified grade including the cost of centering and shuttering all work up to plinth level is to 1 is to 3 is to 6 ratio 1 cement is to 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size , providing and laying in position specified grade of reinforced cement concrete including the cost of centering shuttering finishing and excluding cost of reinforcement all work up to plinth level 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 ratio coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth and string courses fillets columns pillars piers abutments posts and struts etc above plinth level up to floor five level including cost of centering shuttering finishing and excluding cost of reinforcement 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , reinforced cement concrete work in beams suspended floors roofs having slope up to 15 degree landings balconies shelves chajjas lintels bands plain window sills staircases and spiral stair cases above plinth level up to floor five level including the cost of centering shuttering finishing and excluding cost of reinforcement with 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 ratio coarse sand zone iii ratio 3 graded stone aggregate 20 mm nominal size , brick work with common burnt clay fps non modular bricks of class designation 7 and half in foundation and plinth in cement mortar 1 cement 6 coarse sand , brick work with common burnt clay fps non modular bricks of class designation 7 and half in superstructure above plinth level up to floor v level in all shapes and sizes in is to cement ratio mortar 1 is to 6 ratio 1 cement 6 coarse sand , half brick masonry with common burnt clay fps non modular bricks of class designation 7 and half in superstructure above plinth level up to floor v level cement mortar 1 is to 4 ratio 1 cement is to 4 coarse sand , supplying and stacking or filling for soak pit at site over burnt jhama brick aggregate 90 mm to 45 mm , cement concrete flooring 1is to 2 is to 4 ratio 1 cement is to 2 coarse sand is to 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate cement make nuvoco lafarge or ultratech or acc or as per direction of eic , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500 d or more make sail tata jindal , 15 mm cement plaster on the rough side of single or half brick wall of mix is to 1 is to 6 ration 1 cement is to 6 fine sand ratio rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratec

CTN :39531444

20 Mar, 2025 NA

Datia - Madhya Pradesh

Tender For supply of miscellaneous item equipment, furniture and material - miscellaneous item- eqiuipment, furniture, material, slotted angle rack open type as per attached specifiation, slotted angle rack three sided covered as per attached specifiation, narcotics cabinet - double lock as per attached specification, air conditioner 2 ton as per specification attaced in tender document, geyser 25 ltr capacity as per specification attaced in tender document, refridgerator single door as per specification attaced in tender document, fly catcher as per specification attaced in tender document, ceiling fan as per specification attaced in tender document, wall fan as per specification attaced in tender document, shoe rack fiber as per specification attaced in tender document, hospital cubicle curtain as per specification attaced in tender document, air quality index monitor as per specification, soap dispenser plan with button as per specification attaced in tender document, soap dispenser automatic touchless as per specification attaced in tender document, refridgerator thermometer digital, battery type fxd-2-mhd-1000 ocv - 12.58 v, plastic cntainer with 6 compartment rectanguler as per specification, plastic cntainer box plane rectanguler as per specification, plastic containers/bucket round standard quality volume 10-15 ltr, plastic tray as per specification, nitous oxyde cylinder( a type and pin type), magnifier glass, office filing tray plastic as per specifications, visitor chair stainless steel 1 seater capsule pipe , with armrest as per attached specification, rectangular conference meeting table, without storage as per specification, chikunguniya elisa (antigen) kit(pack of 96/as per attached specification in tender),consumable, hiv elisa test kit, pack size 96 wells per kit(1 kit containing 96 wells, dental material, glass-ionomer cement (gic) type 1 (as per attached specification), glass-ionomer cement (gic) type 2 (as per attached specification), glass-ionomer cement (gic) type 9 (as per attached specification), phosphoric acid anterior etchant (as per attached specification), composite anterior mirror fill (as per attached specification), root canal sealer (indomethacin) (as per attached specification), glass ionomer silver reinforced (as per attached specification), air rotor hand piece oil spray (as per attached specification), radio opaque calcium hydroxide liner- paste of ca(oh)2 paste+catayst (as per attached specification), k-files 15-40 (21mm) head strom files(h-files) size no. 15&20 (as per attached specification), k-files 15-40 (25mm) head strom files(h-files) size no. 15&20 (as per attached specification), k-files 45-80 (21mm) head strom files(h-files) size no. 15&20 (as per attached specification), k-files 45-80 (25mm) head strom files(h-files) size no. 15&20 (as per attached specification), h-files 15-40 (21 mm) size no. 15 & 20 (as per attached specification), h-files 15-40 (25 mm) size no. 15 & 20 (as per attached specification), gutta percha point 15-40 (21 mm long flat edge gp points 1 pack 6 file (as per attached specification), gutta percha point 45-80 (25 mm long flat edge gp points 1 pack 6 file (as per attached specification), barbed broaches 1 pack 6 files size 21 mm (as per attached specification), barbed broaches 1 pack 6 files size 25 mm (as per attached specification), endodontic absorbent points size 15-40 (as per attached specification), ctg paper for unicare mcf-21k fetal monitor size-width:12mm (4.4inches) x length:200mm (7.9inches) x diameter:65mm(2.6inches), dental formocresol 30 ml, protaper universal niti hand files - variable taper 25mm finishing 2 (f1), protaper universal niti hand files - variable taper 25mm finishing 2 (f2), protaper universal niti hand files - variable taper 25mm finishing 2 (f3), gutta percha f1, gutta percha f2, gutta percha f3, physiotherepy material, latex thera band for physiotherepy exercise 5 pcs in defrent colour as per spcecification, physio

CTN :39255384

04 Mar, 2025 NA

Ri Bhoi - Meghalaya

Tender For bid to ras supply of plug 20 mm dia , gi reducer socket 25mm dia to 20mm dia isi marked , gi socket 15 mm isi mark , gi socket 20 mm isi mark , gi tubing med gde 20mm is 1239 , gi union 25mm , glass self corner 12inch by 12inch thicness 5mm with cp railing , grating cp 100 mm hole , jet spray 1200mm tube dia 15mm cp , kitchen rack ss l 24 inch w 30inch d 10inch , kitchen rack ss superior quality size l 36 inch w 36 inch d 10 inch , kitchen sink 36inch by 18inch by 7inch ss with drain board , knob for side board dressing table writing table etc , laminated sheet or sunmica l 8ft w 4ft thick 1mm , magnetic catcher for cupboard or wardrobe l 30mm w 10mm thick 60mm , melamine high glossy , mirror for dressing table ladies l 48 inch w 18 inch , mirror looking l 20 inch w 16 inch with pvc frame , ms screw wood 35 mm 8 gauge 100 nos in pack , m seal , nails wire steel 100mm , nails wire steel 50mm , nipple gi 15mm dia 2inch long , nipple gi 15 mm dia 4inch long , nipple gi 15mm dia 6inch long , nipple gi 20mm dia 4inch long , nipple gi 20mm dia 6inch long , particle board prelaminated l 2400mm w1200 mm thickness 12mm , pegs alluminium hook 100 mm , pillar cock fancy type 15 mm cp , ply teak face l 8 ft w 4 ft thickness 4 mm , ply wood commercial l 8 w 4 thickness 8mm bwr , ply wood commercial l 8 ft w 4 ft thickness 12mm bwr , plywood l 8 ft w 4 ft thickness19mm bwr , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , ply wood commercial l 8 ft w 4 ft thickness 4 mm , pvc angle cock 15 mm , pvc flush bend 40 mm , pvc pipe 40mm dia 3mtr long , pvc seat and back for chair verandah offrs , pvc seat for chair dining , pvc stop cock internal thread 15mm , pvc tank nipple 20mm , pvc waste coupling 50 mm for stainless steel kitchen sink , red oxide primer 1 ltr in pack , sand paper grit 150mm l 280mm w 230mm , seat and back for chair school , seat cover plastic for ewc white colour , shower rose110mm cp 15 mm , sink mixer wall mounted cp 15mm , stop cock brass 15 mm external thread , stop cock brass 15 mm internal thread , teflon tape white l 1200mm w 12mm , telescopic channel l 10inch w 1point 6inch d point 5inch , thinner pack of 1ltr , touch wood in 1 ltrs pack , union socket 15mm , wall mixer 3 in 1 with l bend 15 mm , waste pipe pvc 32 mm , white cement 1 kg pack , wire mesh gi width 1200mm 15 mtr length 0 point 56 mm nominal dia of wire and average width of aperature 1 point 18mm , wooden beads for fixing glass 2nd class seasoned size 10mm by 10mm , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :39255381

04 Mar, 2025 NA

Kamrup - Assam

Tender For bid to ras supply of mark , gi union 20mm isi mark , glass shelve diplomat cp 600 mm long 12 mm wide , glass pane clear 3mm thick l 1 point 20 w 0 point 90 mtr , glass sheet pane 4mm thick l 1200mm w 900mm , grating jali plain 100mm ss allieds type , grating floor drain round 100mm ss anti cockroach allieds type , grating plain 100mm anti cockroach ss allieds type , hasp and stapple alu 100 mm isi mark , hasp and stapple alu 75 mm isi mark , health faucet with hook 1 mtr tube cp , helical door spring 300mm length , hydraulic door closer isi mark , hydraulic door closer heavy duty isi mark , kitchen sink l 36 inch w 18 inch stainless steel with drainage board , kitchen sink l 45 inch w 20 inch stainless steel with drainage board , kitchen stainless steel sinks with single bowl without board size l24 inches w 18 inches , kitchen steel plate rack l 30 inches w 30 inches kitchen rack ss l30 inches w 30inches d 10 inches , m seal , mirror cabinet bathroom pvc 500 mm into 400 mm , mirror looking l 24 inches w18 inches with pvc frame , paining brush 75 mm , painting brush 100 mm , painting brush 50mm , plastic felt roll of 20 mtr long 1 mtr wide wt 30 kgs with membrane 20 1m make stp product no 1904 , plywood l 8 ft w 4 ft thickness12mm bwr grade , plywood l 8 ft w 4ft thickness 6mm bwr grade , prelaminated particle board l 8ft w4ft thickness18 mm , putty wall white , pvc urinal waste pipe 40 mm dia 750 or 800mm long , pvc waste pipe 32mm dia 750 or 800mm long , seat cover plastic for ewc white colour , shower pvc round 150mm dia , shower sandwich rain l 6inches w 6inches 150mm long , single lever sink mixer 15mm single lever square type , sliding door bolt alu 250mm rod dia 16 mm , sliding door bolt alu 300mm rod dia 16 mm , sliding door bolt ms 250mm rod dia 16 mm , sliding door bolt ms 300mm rod dia 16 mm , cp wall mount soap disc l 120mm w 85mm h 80mm , soap dish pvc square , ss holder for curtain rod 25mm 20 guage , stop cock cp 15 mm external thread , stop valve angle cp 15mm rubal type , super flash strip 50mm width 1 point 5mm thick in a roll of 10 mtrs make stp limited , swan neck center hole basin mixer single hole 15mm rubal type , thinner , toilet paper holder cp , cp towel ring round l 165mm w 155mm h 55mm , towel rail 18mm dia 600mm long , towel rail rack ss 600mm long 24 inches , towel ring 900 and 18mm pvc , tower bolt alu 100 mm bolt dia 12mm , tower bolt alu 125 mm bolt dia 12mm , tower bolt alu 150 mm bolt dia 12mm , tower bolt ms 150 mm bolt dia 12mm , tower bolt ms 200 mm bolt dia 12mm , varnish , wall mixer telephonic with divertor 15mm cp , waste coupling fitting 32mm cp , waste pipe 32mm pvc dia for whb , waste pipe pvc dia 40mm length 750mm , water storage tank 1000 ltr 3 layer isi mark , wire mesh gi width 1200mm 15 mtr length 0 point 56 mm nominal dia of wire and average width of aperature 1 point 18mm , cover for water tank 500 or 1000 ltr , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

Ceramic Wall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector