Latest ceramic wall Tenders | Government ceramic wall Tenders

State Government

CTN :39108144

04 Feb, 2025 2.89 Lacs

Parganas - West Bengal

Tender For construction of brick pavement road with supporting wall at barendrapara and srabani complex at ward no-16, under rajpur-sonarpur municipality.

CTN :39094453

25 Jan, 2025 NA

Patna - Bihar

Tender For supply of civil construction materials in rajgir zoo safari. - stainless steel sections of different sections , 304 grade , mild steel fe 500 grade tor steel conforming to related is codes and relevant bis/irc/morth&h specifications for reinforcement in rcc. (tata, sail,vizag or shyam steel only) , tmt fe500 -25 mm dia. , tmt fe500 -20 mm dia. , tmt fe500 -16 mm dia. , tmt fe500 -12 mm dia. , tmt fe500 -10 mm dia , tata / tiscon , tmt fe500 -8 mm dia. , civil construction materials , a) coarse sand (nardiganj sand) , b) local fine sand for filling , c) local good earth for filling in lawn & garden , graded stone aggregate conforming to is codes and relevant bis/irc/morth & h specifications (from domchach) , a) 20 mm nominal size (from domchach) , b) 10 mm nominal size (from domchach) , designation 100 a bricks conforming to is codes and relevant bis/irc/morth & h specifications , fly ash bricks conforming to is codes and relevant bis/irc/morth & h specifications , ordinary portland cement (o.p.c. 43 grade) of ultratech, ultratech premimum, acc, lafarge only. , portland pozzolana cement (p.p.c) of ultratech, ultratech premimum, acc, lafarge only. , portland slag cement (p.s.c.) of ultratech, ultratech premimum, acc, lafarge only. , kota stone 600 mm x 600 mm x 30 mm , kota stone 300 mm x 300 mm x 30 mm , vitrified floortiles 800 mm x 800 mm (kajaria/johnson/somani/nitco) , vitrified tiles 600 mm x 600 mm (kajaria/johnson/somani/nitco) , ceramic floor tiles 300 mm x 300 mm (kajaria/johnson/somani/nitco) , ceramic wall tiles 300 mm x 300 mm x 10 mm (kajaria/johnson/somani/nitco) , 18 mm thick polished granite stone , z-black polished rajsthan , z-black flame finish rajsthan , ms structural steel sections i/e flat, angle, tee, i section, h-section, z-section, square-section bar etc. steel joist, steel channel, steel angles, steel flats and square bars etc. (conforming to is codes and relevant bis/irc/morth&h specifications) (tata, sail,vizag or shyam steel only) , mild steel hollow tubes (mild steel hollow sections conforming to is codes and relevant bis/irc/morth & h specifications) (tata, sail,vizag or shyam steel only) , interlocking c.c.( cement concrete) white paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, interlocking c.c.( cement concrete) coloured paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, moorum 5 to 10 mm koderma, gsb grade-1 , colour coated profile sheet , 0.50 mm (+0.05%) tata, wall putti jk/ birla, cement primer asian paint/ burger paint /nerolac and equivalent brand, premium acrylic smooth exterier paint , plastic emulsion paint , enamel paint

CTN :39073366

14 Feb, 2025 NA

Nashik - Maharashtra

Tender For supply of creation of gun control equipment repair facility - aluminum paneled structure for gun control equipment lab with 02 x glass doors and glass partition , pvc false ceiling alongwith supporting structure , vinyl flooring , wall mounted work station with electric connections and sockets , wall mounted fans , surface square lights with wiring

CTN :39070078

14 Feb, 2025 NA

Jamnagar - Gujarat

Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes

Central Government/Public Sector

CTN :39010580

30 Jan, 2025 NA

Durg - Chhattisgarh

Tender For supply of hook bolt assly rail for eot crane as per drg no m m 1994 , dust sealing channel for impeller breaker as per drg no m m 389 item 3a , dust sealing channel for impeller breaker as per drg no m m 389 item 3b , tube mill coupling bolt basic and silica between gearbox and tube mill item no a c d and e except b shackle as per drg no m m 053 item 1 , pan side scraper arm for 1 ton cci mixer mcb shop as per drg no s0020000p0050 , pan side scraper for 1 ton cci mixer mcb shop as per drg no s0020000p0052 , agitator mixing blade with hard facing 12 blades in one set for 1 ton cci mixer mcb shop as per drg no s0020000p0047 , pan bottom scraper for 1 ton cci mixer mcb shop as per drg no s0020000p0053 , pan bottom scraper arm for 1 ton cci mixer mcb shop as per drg no s0020000p0051 , pan supporting roller assy5110900 for light mixer machine as per drg no m m 138 c , wall scraper for light mixer machine as per drg no m m 026 c , vibrating screen clamp as per drg no m m 124 , lever assyfor skip hoist as per drg no m m 113 r3

corporations/Associations/Others

CTN :39015817

05 Feb, 2025 NA

Dantewada - Chhattisgarh

Tender For community building construction work near ward 06 municipality, cc road construction work including crossing wall from anil house to rama house, ward 17 ,construction of cc road including supporting wall near ward 06 nagar palika office and construction work of parking shed compound in ward 04 mangal bhawan

Central Government And Public Sector

CTN :38919099

01 Feb, 2025 NA

Damanjodi - Odisha

Tender For supply of 3000010646_ 1_ 83002101160-loopin loopout box-ltg pole junction box loop in loop out junction box as per attached technical specificationwith following minimum requirement. frp material of thickness 4mm (min),04 no of ways(min)at bottomwith provisionof cable gland,08 nos(min) terminal connector of1100v grade and supporting cable size:25 sqmm max) (one) and 03nos of 4cx2.5sqmm copper cable.dimension of jb (wxhxd)mm:150x150x75mm. (minimum)overall dimension tolerance ( +in mm): 20 in w xh and 10 in dmaterial of junction box: fibre reinforced plasticdegree of protection: ip65 (as per is/iec 60529:2001 latest)safety compliances: fire retardant and self extinguishing ul-94 5vamaterial (sheet)minimum thickness (in mm): 4type of front cover fixing on junction box (front side): front cover with 4 nos. quarter turn tool operated locking knobs.provision of knock out for cable glands on junction box: yesno. of ways on jb: 4 (bottom side)shape of the jb: rectangular/squarevoltage grade of terminal block: 1100 v (min), 50 hz, ac number of terminal connector on junction box:8 terminal connector supporting for maximum size of conductor (in sq mm):4cx25sqmm al cable insulation resistance> 200 mohmtype of mounting: structural mounting/wall mounting accessories for each junction box: neoprene rubber gasket 1 no.high voltage withstand test (between all live parts connected together and the body):2 kv (rms) for 1 minute availability of test reports withcomplete drawings from central govt lab/nabl/ilacaccredited laboratory to prove conformity of the specification: yestest report number and date : party to furnishname and address of the lab: party to furnishagreed to furnish all the test reports and certificates to the buyer/consignee on demand: yes""all other specifications are as per annexure-1, party to submit theannexure -1 in complete filled up & signed condition failing whichthe offer will be technically rejected"