Latest certification service Tenders | Government certification service Tenders

Central Government/Public Sector

CTN :45396794

04 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of industrial safety hand gloves as per en iso 21420:2020 or latest. measurementof gloves: hand size -267 mm and length of gloves minimum 356 mm. rating: the rating of the gloves shall be minimum 4-1-4-4 when tested as per en 388: 2016 or latest and the firm must submit the test certificate issued from nabl accredited laboratory for proving the conformity. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45389324

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of hiring of agency for iso certification service - recertification audit of iso 21001:2025 for bae; surveillance audit, re-certification audit; as per rfp

State Government

CTN :45263804

12 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45389106

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms); certification as per iso 9001 2015 three years validity; adequacy and certification audit

Central Government And Public Sector

CTN :45391108

16 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of c c tips iso-c 40 grade k-10 size-40l x 28w x 12thick. make: widia, sandvik,drillico, ceretizit.note:authorised dealer should only participate in tender and authorised dealership certificate should be furnished at the time of participation of the tender. ]

Central Government/Public Sector

CTN :45395497

18 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of spare parts of hmt lathe & milling machine as under. one set consists of: 1. spares of hmt lathe machine model-nh-26. make -hmt or equivalent (a). hydraulic gear pump-02 nos. (b). hydraulic clutch-01 set (c). clutch plate outer (sintered)-06 nos. (d). clutch plate inner ( steel)- 06 nos.2. spares of hmt milling machine model -fn-2, make-hmt or equivalent (a). arbor support pb bush -01 nos.(b). iso taper arbor with set of spacer and two bearings bushes (32 mmx750 mm)-01 no. note: 1. firm should provide testing/guarantee or warranty certificate of spares and spares to be compatible to the hmt lathe nh-26 & hmt fn-2 milling machines. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45393388

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of double ended deep/shallow ring spanner with deep sleeve coating (chrome vanadium steel) 6mm to 32 mm consists of : 6-7 mm = 01 nos., 8-9 mm = 01 nos., 10-11 mm = 01 nos., 12-13 mm = 01 nos., 14-15 mm = 01 nos., 16-17 mm = 01 nos.. 18-19 mm = 01 nos., 20-22 mm = 01nos., 21-23 mm= 01 nos., 24-27 mm = 01 nos., 25-28 mm = 01 nos., 30-32 mm = 01 nos.. note: 01 set consists of 12 nos.items as stated above of iso/din/bis standards and to be procured from oem/authorized dealer. test certificate to be provided from approved nabl lab. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45393389

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of double ended jaw spanners with deep sleeve coating (chrome vanadium steel) 6mm to 32 mm consists of : 6-7 mm = 01 nos., 8-9 mm = 01 nos., 10-11 mm = 01 nos., 12-13 mm = 01 nos., 14-15 mm = 01 nos., 16-17 mm = 01 nos.. 18-19 mm = 01 nos., 20-22 mm = 01nos., 21-23 mm = 01 nos., 24-27 mm = 01 nos., 25-28 mm = 01 nos., 30-32 mm = 01 nos.. note: 01 set consists of 12 nos. items as stated above of iso/din/bis standards and to be procured from oem/authorized dealer. test certificate to be provided from approved nabl lab. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45373739

22 Jun, 2026 NA

Multi City - Multi State

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 14001 - environmental management system (ems), iso 45001 - occupational health & safety management system (ohas); consulting, surveillance audit, re-cert..

CTN :45363385

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for civil department - purchase of equipment s, sand replacement test apparatus metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300mm with 100 mm hole). another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kitsseamless steel cylinder with no sharp edges. common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products) common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1 wall thickness ~3 mm (industrial products), core cutter aim 161 model core cutter: seamless steel tube (typically 100mm id, 130mm height, 3mm wall thickness). steel dolly: 25mm high, 100mm id, to prevent damage while driving. steel rammer: for driving the cutter. tools: spade, straight edge (knife), moisture containers. , slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate andtamping rod material make : mild steel, jar test apparatus uniform stirring of up to 6 samples simultaneously. stirring rods should be adjusted individually during mixing digital display which should clearly indicate the speed of rotational variable speed 1-200rpm. heavy duty 1/20hp motor with gear train mounted on a mild steel housing. stainless steel stirring paddlers with adjustable height. paddles to be driven by electronically controller variable speed. locking collars or stirring rods permit adjustment height of paddle height. spacing of 6 (150mm) between stirring rods so as to permit use up to 1000ml beaker. the digital timer to be set to count down from 1 to 99 minutes. housing material: crc / ms sheet duly powder coated. power consumption : 220/230v ac supply 50hz single phase motor : 1/ 20hp motor good quality illumination : built in illuminator beaker : 6 nos 1000 ml beaker 1, compression testing machine 1000kn capacity capacity: 1000 kn type: hydraulic,floor-mounted accuracy: 1% of indicated load load application:smooth, uniform, controlled platens:hardened steel platens, suitable for concrete cubes/cylinders safety:overload protection, pressure relief valve, emergency stop, safety guard standards: is 516 / astm / iso compliant power supply: 415 v, 3-phase, 50 hz accessories: platens,spacers, pressure gauge, operating manual calibration: factory calibrated with certificate installation & training: included

Certification Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors