Get complete information related to latest China Dish Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic China Dish Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding China Dish Tenders.
Tender For corrigendum : supply of supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , install, replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , install, replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels
Tender For supply and delivery of kitchen equipments in amma unavagam at kamaraj nagar in thiruvathipuram municipality. - supply and delivery of milk boiling vessel the inner vessel is fabricated by 304 grade 2mm thickness stainlesssteel sheet the inner bottom dished porition is kept at a distance of 100m bottomplate for the effective functioning outer vessel bottom is made of 1.6mm thick and the vessel sides are supported by 65 mm dia stainsteel rod with steam inlet connection size 16" dia x 16"h (50 lts), supply and delivery of idly plant -240 nos direct steam double jacketed, capacity 240 idles / batch (4 chamber) moc : ss 304 grade, vessel thickness 1.2mm, steam entry : individual entry for each module, module door : with packing of glass wool in between the chambers of the door (double jacketed), self locking when steam in on, seating : food grade rubber beading (removable), trays / module : 3 trays, total trays 12 nos, idles / tray 20 idles, stand 1 ss square tube, 1.5 mm thickness 304 grade,(size: 25"l x 21"b x36"h), extra idly trays, idly ss stand, supply and delivery of ss hot bain marie size : 24 l x 14 b x 11 h (2 holes), made out of 1.25 mm ss 304 grade sheet, consists of 2 containers, each container 10 litres capacity, mounted on 1 od 16 g swg ss 304 pipe legs with adjustable nylon boot.(keep sambar hot ever), supply and delivery of single burner cooking range size : 24 l x 24 b x 18 h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose), supply and delivery of ss work table for idly size : 900 x600x850mm, made out of 16 g swg ss 304 grade sheet, legs made of 1 od 16 swg ss 304 grade pipe with adjustable nylon boots, supply and delivery of double burner cooking range size : 48 x27 x16 , top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs., supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments aluminum dabara, 25 kgs capacity heavy grade, aluminum dabara, 10 kgs capacity heavy grade, aluminum bucket, 25 litres capacity, aluminum rice filter, 25 kgs capacity, ss idly collection tray, ss rice karandi, big size, ss sambar karandi, big size, ss water drum 50 litres capacity, ss water jug, ss oil can, 5 litres capacity, ss plates, round, 3 compartments, ss tumblers, with curved edges, 300 ml capacity, ss spoon for eating, ss bony, ss muram, big size, ss filter karandi, ss knife, ss rice & sambar /curd mixed vessels, ss rice & sambar / curd mixed karandy, ms kadai, 24 dia, pressure cooker 22 litres capacity, isi make, 320 litres capacity refrigerator, plastic tray, plastic pot, plastic mug, plastic drum, 50 litres, plastic container (10 litres, plastic muram, plastic stool medium, cloth mat, idly plate cloth, brooms, hot box, electronic weighing scale 30 kgs capacity, mixer heavy duty 1 hp, 3 jar, tilting grinder 15 litres capacity, idly making vessel, pesto flex (big), ss jarnee 5 feet length, aluminium dubara lid 25 kgs, aluminium dubara lid 10 kgs, ss rice karandi, medium size, ss rice karandi, ss volley 10 lit capacity, ss lid 10 kgs capacity, supplying and erecting in position of following literscapacity industrial model reverse osmosis water-cum-purifier to deliver potable water with world healthorganisation (who) standards with following accessories.(a) ms skid - 1 no.(b) media 11054 no. vessel with 20 nb multiport valve(with media pubble and fine sand and activated carbonfilling) set(c) feed pump 0.50 hp 1 no.(d) vertical pump 2-9, 2.00 hp / single
Tender For corrigendum : d. supply of milk testing glassware and chemicals. 70 sets - d) milk testing glassware & chemicals, milk butyrometer (isi make), double tested, for milk 0-10%, accuracy 100%, lactometer zeal type ,0 to 40 with division, calibrated at 84 f as per mother dairy standard, accuracy+_0.25 lr, thermometer(alcohol), 0 to 1000 c, yellow back, accuracy 100%, graduated pipettes 10 ml ( original borosil), milk pipette 10.75 ml , double tested, test tubes 18 x 150 mm ( original borosil, glass beakers , 100 ml ( original borosil ), glass beakers, 500 ml ( original borosil ), porcline dish , 3 inch, sprit lamp, stainless steel , 100 ml., plastic sample bottles , 50 ml, with cap, made from food grade plastic (as per approved sample),minimum weight-5.5 gm, plastic tray for holding 24 nos. sample bottles securely , made from food grade plastic, minimum weight 300 gm +_10 gm, tray for reagents, size 16x12 inches, made from food grade plastic, plastic tilt measure 1ml for alcohol with rubber cork & with plastic bottle of 250 ml., plastic tilt measure 10 ml for acid with rubber cork & with plastic bottle of 500 ml, test tube stand for 12 tubes of size18x150mm , made from aluminum, nylon brush for cleaning pipettes, nylon length 4 inches, total length 12 inches, nylon brush for cleaning 50 ml milk sample bottles, nylon length 4 ",with tail & thick steel wire, heater, acid (20 kg.) & alcohol (2 ltr)
Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe