Latest ci casing Tenders | Government ci casing Tenders

CTN :42615240

04 Dec, 2025 NA

Medak - Telangana

Tender For corrigendum : supply of track d6-6.78, part. no: 111206 , stopping block(short) for clamp(2) -pin 3x13.5x1, part. no: 301066 , stoppingblock(short) for clamp{ 1-3-pin 3x14x255, part. no: 301064 , spindle d16-100, part. no: 406663 , pressure spring, part. no: 053060 , lower plate f-50x3.5x90, part. no: 030905 , lower plate f-50x3.5x90, part. no: 030937 , lower plate, h- 50x3.5x90, paart. no: 030912 , upper jaw for clamp/upper, part. no: 302133 , cable chain, part. no: 055008 , locking pin bi-ci-di for index tool holder, part. no: 111859 , pressure spring" 1" , part. no: 053045 , lift springs for (b/c/bi/ci/bf/cfx12) , part. no: 053053 , lift springs for (dix8) , part. no: 053068 , lifting pin l= 39/ (b/c/bi/ci/bf/cfx8) , part. no: 011921 , guide pin c-d, part. no: 111034 , coupling 300nm, part. no: p027090 , cylinder 40-30, part. no: p001615. , filter mat, part. no: s010861 , pressure spring, part. no: 053043 , roller bearing strip, part. no: 050605 , filter element pneumatics, valve terminal, part. no: 414295 , valve terminal, cpv14, part. no: 473325 , valve block cpv14, part. no: ax012052

Central Government/Public Sector

CTN :41025189

29 Nov, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For bid to ras supply of heater,room,230v,2000w , cnctr lug,185mm2,cu , cnctr lug,95mm2,cu,250a , blade saw,hcksw,25mm,300mm , frame hand hacksaw,blde adjstbl,300mm , v belts , cnctr lug,240mm2,cu,hvy dty , coupling,jaw,flxbl,ci,0.49kw 100 rpm,l100 , spider,nytrl rbr,f jaw cplng l 100 , shackle,d,5ton , shackle,d,2ton,80 , shackle,d lnk,10ton , disc grindg,25.mm,100.6mm,whl , clamp wre rpe,u,10mm , clamp wre rpe,12mm , cnctr lug,25mm2,cu , siren,230v,1km range , hose air,1 by 2 in,pneum

Central Government/Public Sector

CTN :42924308

06 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For casting and machining of 04nos.of 10inch dia and 12inch dia ci coupling for ht pump and motor of benidih, phularitand, amp colliery.

Central Government And Public Sector

CTN :42565226

02 Dec, 2025 NA

Kaiga - Karnataka

Tender For corrigendum : supply of ms. , 12. bearing housing de part no 19 of dwg no. mpl- hh2m-65-010-7276-01 for maxflow make pump, model- 65hh2m and pump serial no.06060032 and 06060033 moc- ci, is 210, fg 260. , 13. coupling key part no 21 of dwg no. mpl-hh2m-65-010-7276-01 for maxflow make pump, model- 65hh2m and pump serial no.06060032 and 06060033 moc- ms. , 14. grease cup part no 22 of dwg no. mpl-hh2m-65- 010-7276-01 for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033 moc- ms. , 15. coupling set, pump and motor for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033. , 16. impeller, part no 3 of dwg no. mpl-hh2m- 65-010-7276-01 for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033 moc-bronze is 318 , 17. shaft sleeve part no 7 of dwg no. mpl-hh2m- 65-010-7276-01 for maxflow make pump, model-65hh2m and pump serial no.06060032 and 06060033 moc-bronze is 318 , 18. shaft sleeve, part no 7 of dwg no. mpl-hds1- 150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc- bronze, is-318. 1 set - 2 no of sleeves , 19. body wearing ring, part no 11 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-bronze, is-318. , 20. seal cage, part no 15 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-bronze, is-318. , 21. pump shaft, part no 21 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-en 8. , 22. impeller, part no 13 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-bronze, is-318. , 23. gland flange, part no 8 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ci, is 210, fg 260. , 24. bearing housing, part no 1 of dwg no. mpl-hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ci, is 210, fg 260. , 25. bearing collar, part no 24 of dwg no. mpl-hds1-150-002- 7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ci, is 210, fg 260. , 26. stuffing box bush, part no 25 of dwg no. mpl- hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc- bronze, is-318. , 27. splash ring, part no 6 of dwg no. mpl- hds1-150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc- rubber. , 28. grease cup, part no 2 of dwg no. mpl-hds1- 150-002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ms. , 29. bearing cover, part no 5 of dwg no. mpl-hds1-150-002- 7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ci, is 210, fg 260. , 30. drain plug, part no 10 of dwg no. mpl-hds1-150- 002-7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ms. , 31. impeller key, part no 17 of dwg no. mpl-hds1-150-002- 7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ms. , 32. coupling key, part no 19 of dwg no. mpl-hds1-150-002- 7276-01 for maxflow make pump, model-150 hds1 and pump serial no. 6060034 and 6060035. moc-ms. //bid details 2 / 32

CTN :42863482

28 Nov, 2025 6.51 Lacs

Chandigarh - Chandigarh

Tender For repair and replacement of public health fixtures accessories and all other items in house no 20 type 6 sector 7 chandigarh (2216 np (p) maintenance and repair - excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m dsr 2.10, all kinds of soil. dsr 2.10.1, pipes, cables etc. not exceeding 80 mm dia. dsr 2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia dsr 2.10.1.2, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : dsr 6.4, cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1, providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : dsr 17.3, w.c. pan with isi marked white solid plastic seat and lid dsr 17.3.1, providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: dsr 17.7, (a) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer dsr 17.7.3, providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.dsr 17.8, providing and fixing white vitreous china water closet squatting pan (indian type) : dsr 17.13, orissa pattern w.c. pan of size 580x440 mm dsr 17.13.2, providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. dsr 17.19, 10 litre (full flush) capacity-white dsr 17.19.1, providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings as dsr 17.28, 32 mm dia : dsr 17.28.1.1, providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. dsr 17.60, 100 mm inlet and 75 mm outlet dsr 17.60.2, sand cast iron s&s as per is- 3989 dsr17.60.2.1, providing and fixing g.i. pipes complete with g.i. fittings and clamps,i/c cutting and making good the walls etc. : dsr 18.10, internal work - exposed on wall, 15 mm dia. nominal bore : dsr 18.10.1, 20 mm dia. nominal bore : dsr 18.10.2, providing and fixing of forged brass / gm gate valve, size 20mm i/d dsr 18.17.1a, providing and fixing uplasticised pvc connection pipe with brass unions : dsr 18.21, 45 cm length : dsr 18.21.2, 15 mm nominal bore : dsr 18.21.2.1, providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : dsr 18.46, 15 mm nominal bore : dsr 18.46.1, 20 mm nominal bore : dsr 18.46.2, providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr 18.48, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : dsr 18.49, 15 mm nominal bore. dsr 18.49.1, providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 69

Central Government And Public Sector

CTN :42843859

04 Dec, 2025 NA

Angul - Odisha

Tender For tender for supply of flexible jaw couplings and its rubber spares : : -lovejoy coupling model rrs 110 by 100 , lovejoy coupling l110 , love joy flexible couplng type l 075al , lovejoy coupling type l 095 al , spider for l 075 coupling , spider for l 95 coupling , spider bush for lj coupling size l 110 , c i lovejoy coupling typ l 100 with p b , lovejoy coupling type l 225 , love joy coupling type l 190 ci with fb , rubber pad for coupling ptno l 190 , lovejoy spiders l 225

State Government

CTN :42441301

02 Dec, 2025 12.55 Lacs

Tapi - Gujarat

Tender For corrigendum : supply of various pumps mechanical seal, coupling, gland packing and rubber items for bmd-6 500mw utps unit-6.(et-6128 bmd-6) - mechanical seal for m/s.tushaco pumps make air pre heater lub oil pump model:,t3s-25/46 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo cycle 680 temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for m/s.tushaco pumps make i d fan lub oil pump model:,t3s-25/38 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo prime 68, temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for n-pit pump model :wpe/wpil 40/260,shaft dia-44.5mm ,rpm:2900, dis pressure : 10.0kg/cm2 , fluid : water (5 to 11.00 ph value) temp-ambiant , faces: c/ sic, hardware in ss316 along with ss 316/cf8m gland plate, mechanical seal assembly for dm regeneration pump model wp/40/320 of 500mw unit-6, mechanical seal assembly for dm water transfer pump model wp 65/320 for 500 mw, mechanical seal asslly. for flowmore make dm water make up pump fig.k5922 -100 x 80, rubber spider for love joy coupling for l-70, rubber spider (star bush) for love joy coupling l-075, rubber spider (star bush) for love joy coupling l-095, rubber element/ spider for love joy coupling size-l-100, rubber spider for love joy coupling size l-110, rubber spider for love joy flexible coupling size: sw-110, rubber element set for jaw flexible coupling size : swq -226/140, rubber spider (star bush) for love joy coupling l-150, love joy coupling size l-075, lovejoy make jaw- flex coupling with rubber spider, size- l 95 (aluminum), ms love joy coupling l- 100, ms love joy coupling size l-110, love joy make flexible coupling with pilot bore size rrs-110 spacer length 140., jaw flexible coupling size: swq -226/140, moc: cast iron, bore: pilot bore., lovejoy coupling size rrl-150 (c.i.), 100per. neopren rubber diaphragm 25 nb for d.m.plant, 100per. neoprene rubber diaphragm 40 nb for d.m.plant, 100per. neoprene rubber diaphragm 50 nb for d.m plant, neoprene rubber diaphragm for 65 mm r.l.dia valve, neoprene 100 per. pure rubber diaphragm 80 mm, neoprene 100 per. pure rubber diaphragm 100 mm, neoprene 100 per. pure rubber diaphragm 150 mm, 100per. neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100per. neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, 100per. neoprene rubber sheet,size-1.5 m x 2 m x 2mm thick, oil seal 50 x 68 x 8 mm fenner make, oil seal size 19x32x7 mm, oil seal size:30x50x7 mm, oil seal size 30x40x7 mm, neoprene oil seal size 35 x 47 x 8 mm, oil seal size:35x47x7 mm, oil seal size 45 x 60 x 10 mm fanner/pioneer/sunny, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 6mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 8mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 10mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 12mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 16mm, teflon round bar , 300 mm long x 30 mm dia., teflon round bar , 300 mm long x 50 mm dia., teflon round bar , 300 mm long x 80 mm dia.

CTN :42640969

28 Nov, 2025 NA

Bardhaman - West Bengal

Tender For supply of procurement of miscellaneous items for khandra colliery and bankola colliery e e - nylon bushing self lubricated , wheel valve gm size 50mm , indicating lamp , earth leakage relay , spare tyre for tyre coupling f 100 , spare tyre for tyre coupling f 90 , cable vulcanising tape , gate valve ci size 25 mm , socket insulator with pin set , spare coil 525 v , fuse base holder , auxiliary contactor , pliers inner 9in bent 90 degree , v-belt c-238 , push button , gas cutting nozzle 1 by 16in , m s bend 6 inch seamless heavy duty 90 degree bend , ht bolt and nut m 24 x 150 mm , tyre for tyre coupling f 140 , ht bolt and nut m20 x 150mm , electrode e6013 4mm x 450mm , v-belt b-70 , carbon brush 50x40x20mm

Ci Casing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government