Latest clamp Tenders | Government clamp Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38557828

01 Jan, 2025 NA

Cooch Behar - West Bengal

Tender For supply of mahindra bolero vehicle spare parts - 0310bm0111n seal valve stem , 0312bau00180n thrust washer lower , 0311aau00020n oil seal rear ptfe , 0502caa01640n loctite vltrablue 5 and 7 , 0311daz00061n oil seal front , 0306gam00381n belt ac wp , 0303bam00350n oil filter , 0310dam00050n valve intakde , 0312bau00430n con rod bush na fb , 0310dam00060n valve exhaust , 0310aam00360n sprocket camshaft 3 cylinder engine , 0310eam00721n tensioner hydraulic , 0312aaz00111n sprocket crankshaft , s0305d020021n filter element cartidge with o ring , 0313aau03551n element air cleaner , 0302dam0018kt kit gasket overhauling , 0315cau00271n sensor differential pressure , 0312aam00981n main bearing lower shell yellow , 0312bam02361n bearing connecting rod upper yellow , 0312bam02381n bearing connecting rod lower yellow , 0310aam01010n cam shaft intake , 0310eam00751n chain , 0309fam001kt kit dosingmodule water , 0305gam0008kt v clamp turbocharger kit , 0312aam00951n main bearing upper shell yellow , 0802caa08871n concentric slave cylinder , 0312bam0019kt kit piston rings , 0312bab0020kt kit piston , 0310bbf00231n valve actuation system , 0309fam00460n hose downstream , 0309fam00450n hose upstream , 0302bm0110n bolt cylinder head , 0302bam01950n cylinder head bearing caps assy , cylinder sleev , injector cleaner , oil sending unit , temperature sending unit , startor motor armature assymble , sencer cleanar bid number/ ( ( ) ): gem/2024/b/5694227 dated/* : 11-12-2024 bid document/ 1 1 / 33

Central Government/Public Sector

CTN :38605203

08 Jan, 2025 NA

Hooghly - West Bengal

Tender For supply of alloy steel chain sling four leg of capacity 2 ton (swl) fitted with alloy steel " o" ring at the upper end and alloy steel eye hook of 2 tons capacity of each leg at the lowe r end capacity (swl): 2 tons. detailed specification is as per annexure-a [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38586874

03 Jan, 2025 NA

Manmad - Maharashtra

Tender For supply of 18" leak clamp as per technical specifications , online leak repair kit for 18" od pl

Central Government/Public Sector

CTN :38557758

01 Jan, 2025 NA

Malkangiri - Odisha

Tender For supply of installation of gas pipeline in chemistry laboratory platform - gas pipeline with installation , bend , t bend , cuppling , emergency ball valve , clamp , teflon tape , burnsen burner with rubber pipe , gas lab , lpg adaptor

Central Government/Public Sector

CTN :38570752

26 Dec, 2024 4.04 Lacs

Mangalore - Karnataka

Tender For providing surge/earthing protection system to chairman bungalow - providing external lightning protection(elp) - supply & installations with:a) 800mm-8mmair termination spike with accessories.b) parallel connector stst (v4a) for rod 7-10mm.c) 8mm round conductor big holder at metal sheet roof, 3mtr,16mm/10mm almgsi air termination rod with accessories-supply & installations with:a) 1mtr,10mmair termination rodb) rod clamp for connecting air termination rods(stst for rod 8-10/rd16mm fsk8.1016skm10x25-v2a)c) 2mtr,16mm almgsi chamfered on both ends air termination rodd) concrete337 circular base 17kg(for air termination rods d-10mm/16mm)e) plastic flat washer d-370mm black for concrete bases-17kgf) connecting clamp for air terminal to roof conductor, 8mm aluminium-magnesium alloy round conductor-rd8/almgsi-with ss holder-supply& installations:a) 8mm aluminium-magnesium alloy round conductor-rd8/almgsi, supply & installation:-8mm round conductor ss holder, supply & installation -8mmround conductor holder for wall& parapet stst with cover plate, supply & installation 8mm round conductor holder-fate roof tile, supply & installation 8mm round conductor holder-tile ridge, supply & installation of connecting sleeve (zdc for rd 8mm with 4 screws m6x10mm), supply & installation of universal cross connector stst, supply & installation of test clamp-round conductor to strip connection, supply & installation of stainless steel 10mm earth conductor, supply & installation of universal cross connector stst, supply & installation of 3mtr,17.2mm copper bonded (ul listed) earth rod with backfill material & accessoriesa)copper bonded (ul listed) earth rod 17.2mm dis, 3000mmlong, 250 micron - 1rodb) terra 20kg fulgurites free backfill material-1bagc) stainless steel earth rod connecting clamp-ss316-1clampd) rcc earth pit chamber 340mmx340mm (frame & cover)-1no, supply & installation of surge protection device(spd)reputed makea) vap dva csp3p100fm combined lightning current &surge arrestor type 1+ type 2 (3ph+n circuit)-installation place: main eb incoming).b) ngate-dga gfftv-combined arrestor: installation place-cable/sattv

Central Government/Public Sector

CTN :38568855

07 Jan, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of catenary wire ending clamp [65 sq.mm ]

Central Government/Public Sector

CTN :38604556

16 Jan, 2025 NA

Kapurthala - Punjab

Tender For supply of cage clamp terminals for lhb non ac coaches with centralized fdb, as per drawing: ed ml-221,rev-0, am-1, table-3, packing instruction: as per standard packing. it should be ensure d that item should not rub during transportation. the item should be packed with ade quate strength. transit damage , if any , shall be at the cost of supplier. [ warranty per iod: 30 months after the date of delivery ]

State Government

CTN :38138566

23 Dec, 2024 NA

Dhanipur - Uttar Pradesh

Tender For corrigendum : supply of surgical instrument items - wire speculum paeds , wire speculum infant , wire speculum adult , superior rectus forceps , phaco temporal speculum with screw , lims forceps , colibri forceps , moorfield forceps , mc. pherson forceps , hausleins forceps , suture typing forceps straight , conjuctival scissors sharp tip , corneal scissors sharp tip , needle holder small , needle holder big , iol dialer , iris repositor fine , chopper , b.p handle , cystotome handle , mosquito artery straight , mosquito artery curved , wire vectis , non irrigating wire vectis , air cannula 27g , hydro cannula 27g , dye cannula 27g , hydro cannula 30g , bull dog clamp , vanas angular scissors , vanas straight scissors , capsulo rexis forceps titanium , caliper straight , caliper curved , simco cannula 22g , simco cannula 23g , dhania box , bowl steel , kuglin iris hook , towel clamp , sponge holding forceps , tooth forceps medium , fine tooth forceps , lacremal probe , punctum fine dilator , peri osteal elevator , bone chiesel , ferry elevator , cats paw retractor small , cats paw retractor medium , cyclo dialysis spatula , enucleation spoon , evisceration scoop , enucleation scissors curved , lid plate , nasal speculum , nasal packing forceps , chalazion clamp forceps , chalazion clamp big , chalazion curator small , chalazion curator medium , orbital retractor , scissor straight , stevens tenotomy scissors curved , indenter , gas retinal hook , syringing cannula 27g , syringing cannula 25g , bone punch 1 2 3 4 mm each , big needle holder for ptosis , vitreous forceps straight 23g , vitreous forceps curved 23g , vitreous scissors straight , vitreous scissor curved , micro rhexis forceps 23g , kelley glaucoma punch , scleral plug holding forceps , muscle hook , desmarres retractor small , desmarres retractor medium , endo light probe 23g , bipolar cautery machine , bipolar cautery lead , endo laser probe 23g , vitrectomy cutter 23g , trocar set 23g , scleral plug 23g , infusion cannula 23g , ac maintainer 23g , endo thermal cautery with lead , r.f ellman bipolar cautery , r.f ellman cuttin lead , cryo cataract probe , cryp retinal probe , phaco tip oertli 30 degree , phaco sleeve 2.8 disposable , phaco cassette oertli , isa phaco handle oertli , autoclave vertical cyclindrical autoclave steam

Central Government/Public Sector

CTN :38604730

09 Jan, 2025 NA

Damoh - Madhya Pradesh

Tender For supply of rail jumper 13 mtrs long with pvc cable and rail clamps at both ends as per rdso drg no:r e/33/p/500 with necessary test and guarantee certificate. followed by i) rail clamp made of al-bronze is30 91/1999 as per rdso drg.no.re/33/p/501. ii) rail jumper ferrule as per drg.no: re/33/p/504 iii)) size of cop percable will be 248/0.45mm (40 sqmm) as per rdso spec to is 1554(pt-i)1988 [ warranty period: 30 m onths after the date of delivery ]

Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors