Latest clay Tenders | Government clay Tenders

CTN :39117786

15 Mar, 2025 NA

Bhadradri Kothagudem - Telangana

Tender For corrigendum : tender for hiring of techno commercial consultant for mining of rare earth elements (rees) and extraction of rare earth elements from coal ash, clay and overburden.

State Government

CTN :39570431

10 Mar, 2025 NA

Sirmaur - Himachal Pradesh

Tender For excavation of 32 no. trial pits in proposed clay borrow areas (quarry sites) at tanaushi, mohtu & malhantuhri in tehsil sangrah & dadahu, for the collection of soil samples in respect of renukaji dam project.

CTN :39581288

20 Mar, 2025 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

corporations/Associations/Others

CTN :39585680

11 Mar, 2025 NA

Bangalore - Karnataka

Tender For auction sale of china clay

corporations/Associations/Others

CTN :39585682

11 Mar, 2025 NA

Multi City - Multi State

Tender For auction sale of alumnus clay,raw clay

State Government

CTN :39557655

18 Mar, 2025 1.00 Crore

Chhota Udaipur - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kawant under taluka panchayat, kawant under mgnrega (annual unit rate) 1 of 2025-26 - supplying and stacking cement (i.s.i.53 grade opc), white cement, coarse sand, 5.0 k.m., 05 k.m. - 10 k.m., 10 k.m. - 15 k.m., 15 k.m. - 25 k.m., 25 k.m. - 50 k.m., 50 k.m. - 100 k.m., fine sand, 5.0 k.m., 05 k.m. - 10 k.m., 10 k.m. - 15 k.m., 15 k.m. - 25 k.m., 25 k.m. - 50 k.m., 50 k.m. - 100 k.m., supplying and stacking brick aggregate 40mm size, 5.0 k.m. lead, 05 k.m. - 10 k.m., supplying and stacking brick bats 20mm, 5.0 k.m. lead, 05 k.m. - 10 k.m., supplying and stacking common burnt clay bricks conventional size, 5.0 k.m. lead, 05 k.m. - 10 k.m., supplying and stacking fly ash brick, hand broken stone aggregate 25mm size to 90mm size, 5.0 k.m., 05 k.m. - 10 k.m., 10 k.m. - 15 k.m., 15 k.m. - 25 k.m., 25 k.m. - 50 k.m., 50 k.m. - 100 k.m., hand broken stone aggregate 40mm size to 63mm size., 5.0 k.m., 05 k.m. - 10 k.m., 10 k.m. - 15 k.m., 15 k.m. - 25 k.m., 25 k.m. - 50 k.m., 50 k.m. - 100 k.m., crushed stone aggregate for hard quality 10 to 20mm size, 5.0 k.m., 05 k.m. - 10 k.m., 10 k.m. - 15 k.m., 15 k.m. - 25 k.m., 25 k.m. - 50 k.m., 50 k.m. - 100 k.m., crushed stone aggregate for hard quality 40mm size, 5.0 k.m., 05 k.m. - 10 k.m.

CTN :39562658

19 Mar, 2025 NA

Kundara - Kerala

Tender For applications for working as marketing agents or service providers for marketing processed china clay in national amd international market

CTN :39563316

19 Mar, 2025 NA

Kundara - Kerala

Tender For execution of mining work of china clay

State Government

CTN :39565418

13 Mar, 2025 4.97 Lacs

Dharamshala - Himachal Pradesh

Tender For repair and restoration of type v residential building at chilgari - wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., painting one coat (excluding priming coat) on previously painted wood and wood based surface with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other foreign matter sand papering and stopping with ready mixed paint other than white complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., painting one coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint, brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter:- with readymixed paint other than whiten complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing panelled,glazed or panelled and glazed shutters for doors, windows and clere storey windows including black enamelled iron but hings with necessary screws 40mm thick in 1st class deodar wood. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing wire gauge shutters using galvanised m.s. wire gauge of i.s. gauge designation 85g. with wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw 40mm thick (1st class deodar wood). complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works .complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of grith upto 30 cm. measured at a height of 1 metre above ground and removal of rubbish upto a distance of 20 metres outside the periphery of the area cleared. complete in all respects as per direction and to the entire satisfaction of engineer-in-charge witnin all leads and lifts., brick work using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( 1 cement : 6 sand ) ist class bricks. complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts.

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Clay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

Central Government And Public Sector