Latest compound walling Tenders | Government compound walling Tenders

CTN :45363385

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for civil department - purchase of equipment s, sand replacement test apparatus metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300mm with 100 mm hole). another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kitsseamless steel cylinder with no sharp edges. common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products) common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1 wall thickness ~3 mm (industrial products), core cutter aim 161 model core cutter: seamless steel tube (typically 100mm id, 130mm height, 3mm wall thickness). steel dolly: 25mm high, 100mm id, to prevent damage while driving. steel rammer: for driving the cutter. tools: spade, straight edge (knife), moisture containers. , slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate andtamping rod material make : mild steel, jar test apparatus uniform stirring of up to 6 samples simultaneously. stirring rods should be adjusted individually during mixing digital display which should clearly indicate the speed of rotational variable speed 1-200rpm. heavy duty 1/20hp motor with gear train mounted on a mild steel housing. stainless steel stirring paddlers with adjustable height. paddles to be driven by electronically controller variable speed. locking collars or stirring rods permit adjustment height of paddle height. spacing of 6 (150mm) between stirring rods so as to permit use up to 1000ml beaker. the digital timer to be set to count down from 1 to 99 minutes. housing material: crc / ms sheet duly powder coated. power consumption : 220/230v ac supply 50hz single phase motor : 1/ 20hp motor good quality illumination : built in illuminator beaker : 6 nos 1000 ml beaker 1, compression testing machine 1000kn capacity capacity: 1000 kn type: hydraulic,floor-mounted accuracy: 1% of indicated load load application:smooth, uniform, controlled platens:hardened steel platens, suitable for concrete cubes/cylinders safety:overload protection, pressure relief valve, emergency stop, safety guard standards: is 516 / astm / iso compliant power supply: 415 v, 3-phase, 50 hz accessories: platens,spacers, pressure gauge, operating manual calibration: factory calibrated with certificate installation & training: included

corporations/Associations/Others

CTN :43114307

01 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For bid to ras corrigendum : tender for supply of supply installation and commissioning of cctv system and public address system at allahabad d d - supply of 5mp ip fixed bullet camera indoor / outdoor with varifocal lens , with supported edge analytics and mounting accessories with 128 gb sd card , supply of 2 mp ptz dome camera outdoor / indoor with 30x optical zoom , 10x digital zoom and with supported edge analytics and mounting accessories with 128 gb sd card. , supply of 5mp fixed dome camera indoor / outdoor ip camera , varifocal lens , with supported edge analytics and mounting accessories with 128 gb sd card , supply of 5mp fixed bullet camera indoor / outdoor ip camera , autofocus motorized remote zoom , with supported edge analytics and mounting accessories with sd card 128 gb , supply of face recognition & forensic search camera 6 mp with analytics along with inbuilt fr licence with 128 gb sd card , supply of 4 mp long range bullet camera to cover lane for lpr (licence plate recognition) , supply of 40 mp critical surveillance camera for surveillance of critical and crowded area with 128 gb sd card , supply of thermal enhanced fixed camera , supply of dual channel ptz camera (thermal + optical) , supply of body worn camera systems with 64gb inbuilt storage with complete set of charging dockyard and other required accessories , supply of video management software (vms) software with licenses for camera for all above mentioned cameras and additional licenses for exiting bosch make cameras-161 nos. , supply of network video server cum storage with 200tb usable storage after raid6 configuration and with failover configuration , supply of client workstation with 6gb graphics adapter , 21.5 inch led monitor , keyboard and mouse for control room operation. , supply of ptz joystick controller for cctv system , supply of 6x2 matrix full hd video wall of 55 display panels along with matrix controller and complete system including mounting frame and full hd hdmi cables for connectivity from workstation to video wall. , supply of switch with 48 25g sfp28 ports and 8 100g qsfp28 ports , supply of gige l3 1ru chassis with 24 100/1000 basex sfp , 4 1g/10g sfp+ , 4 sfp28 (1g/10g/25g) ports and 2 qsfp28 vfl ports. , supply of fixed 1ru chassis switch with 24 poe 1g baset , 2 1g rj45/sfp+ combo , 2 1g/10g sfp+ uplink/vfl ports. , supply of 8 port field switches with 8nos poe+ ports , rj-45 10/100/1000 mbps ports and 2xsfp slots , supply of 10g sfp+ sm , lc fo transceiver modules for above switch , make same as above switch , supply of 1g sm fo , lc sfp transceiver modules for above switches , make same as above switch , supply of 8-port kvm switch with foldable monitor , keyboard & mouse , supply of ip based two way public address (pa) system with application software (with perpetual license) and hardware , supply of ip based outdoor horn speaker with amplifier , supply of ip based indoor speaker with amplifier , supply of ip paging sip system , supply of 19 inch 42u server rack with 800mm width , 1200mm depth including all accessories , supply of indoor 19 inch 12u network rack including all accessories , supply of outdoor , 19 inch 9u network rack including all accessories , supply of hot dip galvanized 5 mtr poles for mounting cameras , supply of 40kva online smart ups in 1 + 1 redundant configuration with separate battery bank for each ups for 30minutes battery backup , supply of 20kva online smart ups in 1 + 1 redundant configuration with separate battery bank for each ups for 30minutes battery backup , supply of 10kva online smart ups with 30 minutes battery backup , supply of 5kva online smart ups with 30 minutes battery backup , supply of 3kva online smart ups 30minutes battery backup , supply of indoor junction box with required mccb/ mcb and required accessories for power distribution at ups point for 40/20/10 kva ups , supply of indoor junction box with required mccb / mcb and required accessories for distribution of

State Government

CTN :45367498

19 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

CTN :45351004

08 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of ordinary portland cement , stone aggregate 20mm , coarse sand shall , stone aggregate 40mm , rr stone , tmt steel bar 16mm dia , tmt steel bar 12mm dia , tmt steel bar 10mm dia , tmt steel bar 8 mm dia , binding wire 20 gauge 0 point 9mm , shuttering water proof plywood of size 8feet x 4feet and 12mm , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 5 inch for shuttering , quick setting compound make , 2nd class hardwood square section 50mmx50mm length 3 point 0 m , wooden ballies 75mm to 100 mm dia 3m , pbs roll is 1322 to 62 weight min 3 kgs per sqm and minimum length 10 mtr width 1m , bitumen and blown type and 85 or 25 grade , water proofing compound , hdpe film of 400 micron , loop holes of size 600x500mm with a angel iron 50x506mm andiron 40x6 mm covered with 3 mm size 200x50x6mmof 8 mm thick mild steel plate 600x500mm of 75x75mm 100 mm , wooden scantling 3 point 20m long section 100x75mm , steel door of size 900x1800 mm shall be provided as per drawing , lightning conductor made of copper tube 150 cm long x 25mm dia , supply dual edge 8 pin cloth hanger , supply pipe 150mm dia or bukhari outlet dia , supply ms round pipe 20mm dia of medium class for telehphone outlet , pre- painted g aluminum zinc coating sheet 0 point 60mm thickstrength of 550 mpa , 75mm dia pvc pipe , ms plate 10 mm , ms plate 20 mm , shredded rubber 150 mm , ordinary portland cement grade 43 , coarse sand , binding wire 20 gauge 0 point 9mm , nails 2 inch , nails 3 inch , nails 5 inch , quick setting compound , 2nd class hardwood and square section 50mmx50mm length 3 point 0m , wooden ballies 75mm to 100 mm dia 3m long , pbs roll is 1322 to 62 weight min 3 kgs per sqm and minimum length 10 mtr width 1m laid , bitumen and blown type and 85 per 25 grade primer for roof treatment , synthetic enamel paint colour , turpentine oil , loop holes of size 600x500mm angel iron 50x506mm and 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick size 200x50x6mm flat iron mild steel plate 400x480mm , steel door of size 900x1800 mm shall be provided as per drawing ms angle 50x50x6 mm , lightning conductor made of copper tube 150 cm long x 25mm dia prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pvc single core 1 point 5 sqmm , pvc single core 2 point 5 sqmm , cable pvc insulated and pvc 1100v , pvc conduit pipe round shape 50 mm dia and 3 point 00 mm , pvc l bend for 20 mm , pvc t 20 mm , pvc square box 4 inch x 4 inch , pvc elbow 20 mm dia , dry wall screw 50 mm , mcb single pole 230v ac and 50 hz and 6 ampc and 10 amp , switch piano flush type15 amp and socket multi purpose 5 or 15 amp piano type with gang box , pvc ceiling rose 2 or 3 terminal , insulation tape 25 mm width 9 mtr , distribution box mcb box 12 way , stainless steel u clamp for 20 mm pvc , isolator 63 amp dp , earthing of building provided using 3 mm dia of size 60cm x 60cm 6mm , pvc t 20 mm for conduit pipe , dry wall screw 50 mm long , mcb single pole 230v ac and 50 hz and 6 ampcand 10 amp , insulation tape 25 mm width 9 mtr long , distribution box 12 way , isolator 63 amp , earthing of building provided using 3 mm dia gi , stone aggregate 10mm to 12mm graded , coarse sand sand shall be clean , stone aggregate 20mm graded , stone aggregate 40mm graded //bid details 2 / 62

CTN :45347371

06 Jun, 2026 52.56 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of drywall cross-recessed screws , 35 mm ms drywall cross recessed screws , supply of pressure sensitive self- adhesive , mcb single pole 230v ac 50 hz 6 amps , mcb single pole 230v ac 50 hz 16 amps , mcb distribution boards in sheet metal enclosure 8 ways , residual current circuit breaker , white cover plate with frame 3 module , white cover plate with frame 6 module , white cover plate with frame 1 module , 3 module concealed metal flush box , 6 module concealed metal flush box , 1 module concealed metal flush box , 25mm x 16mm pvc casing capping , 25mm pvc casing capping l bend , pvc casing capping t 25mm , pvc casing capping elbow 25mm , pvc casing capping square box 4 inch x 4 inch , supply of 250 mm pvc exhaust fan with louvers , supply of 450 mm plastic wall mounting fan , water dispenser 20 lt , 110mm dia upvc swr pipe single socketed , 110mm dia upvc single tee , 4 inch dia 110mm dia upvc bend , 110 x 110mm nahani trap with jali , 50mm dia upvc swr pipe , 50mm dia upvc socke , upvc 50mm air vent cowl , 110mm upvc end cap , 20mm dia 3 layer pp r , 20mm elbow suitable for 20mm dia pp r pipe , 20mm socket suitable for 20mm dia pp r pipes , 20mm equal tee suitable for 20mm dia pp r pipe , 20mm union suitable for 20mm pp r pipes , pp r end plug 20mm confirming , pp r pipe clamp suitable for 20mm piping , ppr tank connector 20mm with check nut and washe , ppr reducer socket 20mm 15mm , upvc reducer socket 110mm 50mm , ppr reducer elbow 20 15mm , white lead , thread cotton ball , pure virgin polytetrafluoroethylene , chrome plated cp towel ring , cp stop cock 15mm , cp bib cock 20mm with flange , water storage tank double layer 1000 ltrs , snow white colour wash hand basin of size 550 x 400mm , cp soap dish , cp pillar cock 15mm , 600x450mm silvered glass , isi marked solvent cement for joining , factory made upvc door of size 750mmx1800mm , towel rail cp 750mm long , vitreous china squatting pan orissa pattern , pvc valve less syphonic action type , two tier sleeping bunks , single piece cushion made of 100 mm thick , 60 ltr plastic waste bin dark brown colour , 1200x750 x 3.5mm thick silvered glass looking mirror , providing and fixing wall mounted hanger strip 450mm in length , heavy duty slotted angle metal luggage rack 381mm x 914mmx1524mm , bricktrowel , drop forged high grade carbon steel brick hammer , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , carbon steel powrah , flat painting brush , industrial rubber glove , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes in 50 m , cutting pliers , non metallic fiberglass measuring tape 15 m , heavy duty crow bar 5 feet , trolley mounted earth auger , portable honey sucker , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade , gi pipe 40 mm bore , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , stainless steel hamam tank 1000 ltrs , heating device kerosene based , fire extinguisher 2 kgs capacity //bid details 2 / 95

State Government

CTN :45322875

05 Jun, 2026 13.17 Lacs

Baramulla - Jammu And Kashmir

Tender For filling of playfield along with edge wall at watergam rafi abad near high school.

CTN :45327249

03 Jun, 2026 6.19 Lacs

Thiruvananthapuram - Kerala

Tender For sports division kunnamkulam-supply of gym equipment at sports division kunnamkulam lac, thrissur - retender - gym and sports equipment, od194241/2025-2026 : commercial leg extension - supply, installation, testing and commissioning of commercial leg extension having the following specifications: size (lxwxh): 1300 x 990 x 1350 mm. net weight: 223 kgs. weight plates: 109 kgs. pulley: 6.0 mm.steel tubing: 50 x 100 mm. steel thickness: 2.5 mm. seat: high density pu. weight material: cast iron. high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating. pin loaded machine. premium quality equipment, od194240/2025-2026 : od199793/2024_2025 : commercial horizontal leg curl - supply, installation, testing and commissioning of commercial horizontal leg curl having the following specifications: size (lxwxh): 1650 x 1145 x 1645 mm. net weight: 232 kgs. steel tubing (d type): 70 x 130 mm. steel tubing flat oval: 50 x 120 mm. steel thickness: 3.0 mm. frame colour: silver. pulley: 105 mm (dia.). seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mm range). weight stack: 100 kgs. weight material: alloy steel. high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating. pin loaded machine. premium quality equipment, od194240/2025-2026 : od199663/2024_2025 :commercial squat rack - supply, installation, testing and commissioning of commercial squat rack having the following specifications: dimensions (lxwxh): 1660 x 1210 x 2160 mm - frame: 100 mm x 50 mm rectangle pipe fabricated solely from 11 gauge rugged wall structural rolled steel tubing, heavy duty ensures superior strength - net weight: 101 kg - weight disc diameter adapter: 28/50 mm - max load: 200 kg - max user weight: 150 kg - high quality rubber boots are used at the ends of the base pipes to avoid damage to the gym floor - scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bonded epoxy coating - accessories: pull down bar, pull triangle - bar support pegs can be positioned from 55 to 180 cm in 5 cm intervals. brand: decathlon or similar make, od194238/2025-2026 : olympic weight plates - 20kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on-black lettering design. built to withstand falls even from overhead. bounce less when falls down. 2 year warranty. weight tolerance - 2%. thickness - 72 mm. brand: bullrock black rubber bumper plates 2.0 or similar make., od194237/2025-2026 : olympic weight plates - 15kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on- black lettering design. built to withstand falls – even from overhead. bounce less when falls down. 2 year warranty. weight tolerance - 2%. thickness - 58 mm. brand: bullrock black rubber bumper plates 2.0 or similar make., od194236/2025-2026 : olympic weight plates - 10kg - bumper plates made up of high-quality natural rubber. manufactured with iwf standard specification, i.e. 450mm in diameter & 50.4mm collar opening with steel ring. thinner plate profile & thicker raised flanges around the edge. matte finish with easy to clean property. white-on- black lettering design. built to withstand falls – even from overhead. bounce less when

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

Compound Walling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector