Concrete Route Marker Tenders

Get complete information related to latest Concrete Route Marker Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Concrete Route Marker Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Concrete Route Marker Tenders .

Filter

Loading....

Get Tender in Email

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

CTN :45657644

14 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of ofc 24 core unarm , hdpe , tjb box , concrete route marker , joint encloser 48 core , joint encloser 24 core , termination box 48 port , termination box 24 port , splicing of 24 core , splicing of 48 core , joint chamber , gi pipe 5 mtr , sc lc 3 mtr , lc lc 10mtr , cat vi patch cord 1 mtr , cat vi patch cord 3 mtr , cat vi patch cord 5 mtr , cat vi patch cord 10 mtr , digging laying road cutting hdd and jointing

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

Corporations And Associations And Others

CTN :44771811

14 Apr, 2026 10.45 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi. - supply & installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi., supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer in charge.), supply and fixing of frp box slide.ladder-frame-25mm n b pipe. handdril-20 mm n b pipe. support-40 mm n b pipe. area : 4.8 m x 0.5 m. platform height : 2.1m. chute :4.0 mm thk f r p. chute length: 4 m. step-width- 75mm. thread 90mm. riser 250mm. the main frame of 2.1mtr height plat-form having pipes are of 40 mm nb b class gi pipe. the box slide is of material frp (fibre reinforced plastic) with attractive beauty colour and flat surface at end of slide for safe landing. the reeling made from 20 mm nb b which can be use like handle to get a grip while start sliding. -the staircase made from 25 mm nb b class g.i. pipe. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing o