Get complete information related to latest Concrete Structure Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Concrete Structure Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Concrete Structure Tenders.
Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges
Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt
Tender For supply of prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead powe
Tender For supply of sditc of decorative street light poles at sagar upavan and mbpa officers colony colaba - 4mtr. post top pole , 50w led jodhpuri post top fixture , cement concrete foundation , making connections , earthing set , earthing arrangement , timer switch box , commissioning of timer switch box , sheet steel tpn switch fuse unit , commissioning of sheet steel 63a tpn switch fuse unit , 3 module water tight and dust proof ip55 enclosure , cable termination , transportation , 4mtr. single curved arm pole , 50w decorative suspended type fixture , armoured cable of size 4c x 6 sq. mm. , laying of cable
Tender For repair/ replacement of lt underground cables and connected items in various locations at mil stn yol - excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cms thick in any type of soil complete all as specified and directed., removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed., pcc 1:3:6 (nominal mix) type c-2 (using 40mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed., pcc 1:4:8 (nominal mix) type d-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed., sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cms thick, complete all as specified and directed note: punned thickness shall be measured., sub class b brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick including taking out old bricks, complete all as specified and directed., laying only bricks along the length of cable on sand cushioning, with width equal to the length of the brick , complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 80mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 50mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., dismantling poles/struts, any size and type including insulators and removing from site, complete all as specified., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 300 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 240 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 185 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe i
Tender For repair/replacement of lt ug cable, lt poles, control panels board, change over switches and allied items at af station naliya under ge(af) naliya - taking out old unserviceable lt cable of any size any type from trench/duct/ poles / roof/pipe etc and keeping aside for segregation of serviceability. serviceable cable will be re-laid at same place or other place as required complete all as specified and directed., supply, laying and connecting xlpe insulated, armoured, heavy duty electric cable multi stranded aluminum conductors, 1100v grade, of size 06 sqmm 2core with proper size of lugs and laid in trenches / ducts / through gi pipe / fixed to poles etc complete all as specified and directed. note: excavation earthwork, cable covers, sand cushioning and gi protection pipe shall be measured and paid separately under relevant item., all as per serial item number 2.00 here-in-before but of size 16 sqmm 4 core., all as per serial item number 2.00 here-in-before but of size 35 sqmm 3.5 core, all as per serial item number 2.00 here-in-before but of size 50 sqmm 3.5 core, all as per serial item number 2.00 here-in-before but of size 70 sqmm 3.5 core, all as per serial item number 2.00 here-in-before but of size 95 sqmm 3.5 core, re-laying of old serviceable cable of any size obtained from item above. note:- excavation earthwork, cable covers, sand cushioning and gi protection pipe shall be measured and paid separately under relevant item., excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in soft/ loose soil, for laying of under ground electric cable, pipes etc complete all as specified and directed. note:-(i) authorised width & depth shall only be excavated, measured and paid as specified in clause 3.2.3 of ssr part ii and 19.74.1 of ssr part i for cable/pipe laying portion.(ii) serviceable pcc /rcc cable cover obtained during excavation shall be stacked separately carefully without any extra cost to the deptt., material and labour for river bed sand filling in trenches/ ducts 15 cm above cable and 8 cm under the cable for cushioning/protection to cable including spreading, leveling and get thick 18cm after hand punning complete all as specified and directed, laying only serviceable un-reinforced precast concrete cable cover class lv, type 1, flat, of 250 mm x 150 mm x 40 mm obtained from trenches, abetting each other with gap between adjacent slab not exceeding 10 mm over under cable for protection complete all as specified and as directed., supply and laying un-reinforced precast concrete cable cover, class lv, type 1, flat, size 250 mm x 150 mm x 40 mm abetting each other with gap between adjacent slab not exceeding 10mm over under cable for protection complete all as specified and as directed., returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick each complete all as specified and directed., removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed., material and labour for cutting under the road /pavement /hard standing or in any other situation with the manual labour for crossing of u/g cable through it and making both the end good complete all as specified and directed ., supply and laying gi water tubing of 80 mm bore, light grade, is-1239 marked with all fittings is marked and laid in trenches/under roads/in drains with suitable size flat iron/gi clamps, bolts, nuts and washers etc for cable protection complete all as specified and directed., supply and laying gi water tubing of 50 mm bore, light grade, is-1239 marked with all fittings is marked and laid in trenches under roads/in drains, fixed to poles/walls with suitable size flat iron/gi clamps, bolts, nuts and washers etc for cable protection, complete all as specified and directed ., supply and laying gi water tubing of
Tender For manufacturing of 8 meter/200 kg working load readymade, prestressed concrete (psc) poles from in-house pgvcl pole factory at shapur (junagadh) to be supplied under pgvcl for 2 (two) years
Tender For budagatti village govt higher primary school compund work under mgnrega scheem - portland cement gp budakatti 034, coarse sand (zone iii) gp budakatti 034, broken stone aggregate 12 mm to 10 mm size gp budakatti 034, broken stone aggregate 20 mm sizegp budakatti 034, binding wire_gp budakatti 034, tmt bars fe 500_gp budakatti 034, add brush, putty, sand paper at 2% on cost of paint_gp budakatti 034, water proofing cement paint_gp budakatti 034, painter class i_gp budakatti 034, add brush, putty, glue at 5% on cost of paint_gp budakatti 034, whitening_gp budakatti 034, dry distemper_gp budakatti 034, add providing and removing scaffolding at 3% on labour_gp budakatti 034, mason class i (with tools)_gp budakatti 034, solid concrete block 40 15 20 cms_gp budakatti 034, hom of vibrator 0.71 days_gp budakatti 034, plasticizer super plasticizer_gp budakatti 034, mason class ii (with tools)_gp budakatti 034, add sundries charges at 2 % on material_gp budakatti 034, add handling , loading and unloading at 1% on material_gp budakatti 034, casurina poles 100 - 150 mm_gp budakatti 034, boulders_gp budakatti 034, size stone 20 x 20 x 25 cms_gp budakatti 034, mixer (concrete small used in culvert)_gp budakatti 034, bond stone 20 x 20 x 45 cm_gp budakatti 034, rubble stones_gp budakatti 034, nam board_gp budakatti 034, add sundries charges at 1 % on material_gp budakatti 034, add watering charges at 1 % on material_gp budakatti 034, mixer (concrete) - 1 cum capacity_gp budakatti 034, broken stone aggregate 40 mm size_gp budakatti 034