Construction Equipment Scrap Tenders

Get complete information related to latest Construction Equipment Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Construction Equipment Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Construction Equipment Scrap Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :39340889

05 Mar, 2025 5.00 Lacs

Baramulla - Jammu And Kashmir

Tender For annual maintainence of assets including wages outsourced through stage contract. - providing and fixing orginal raitwood penalling ,including 12mm ply backing, complete with necessary screws complete job as per the directions of engineer in charge., providing and fixing kd kanas (2.5x1.5) with necessary screws complete job as per the directions of engineer in charge., providing and fixing specified board medium density exterior grade (grade i) to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately) : pre-laminated with decorative lamination on both sides mdf board conforming to is:14587 18 mm, providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.in all colours, shades, except white, ivory, fume red brown, p/f 10 litres without fittings low level cistern (vitreous china), providing and fixing 50 litre geyser along with connection pipes and all neccasry fittings (venus, jaquar,racold ), providing and fixing 15 mm nominal bore c.p. brass bib cock of approved quality conforming to is : 8931, providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931, providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls whereverrequired.18.10.1 white glazed fire clay kitchen sink of size 600x450x250 mm, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge. 19.3.1 internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 19.3.1.1 15mm nominal outer dia pipes., providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government / Public Sector

CTN :39285585

28 Feb, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply and installation of lab equipment for concrete and structure lab-, cube mould (cast iron) (150mm x 150mm x 150 mm as per is), cube mould (cast iron) (70.6mm x 70.6mm x 70.6mm as per is), prism mould (cast iron) (150mm x 150mm x 500mm as per is), prism mould (cast iron) (150mm x 150mm x 700mm as per is), cylinderical mould (cast iron) (150mm x 300mm as per is), enamel tray (450mm x 300mm x 40mm), enamel tray (120mm x 140mm x 40mm), scoop (stainless steel capacity 500 gram as per is), scoop (stainless steel capacity 1000 gram as per is), gauging trowel (100 mm long blade with straight edge. as per is), gauging trowel (150 mm long blade with straight edge.as per is), gauging trowel (200 mm long blade with straight edge. as per is), measuring jugs with handle (graduation, polypropylene capacity 2000 ml), measuring jugs with handle (graduation, polypropylene capacity 3000 ml), beaker with spout (borosil capacity 50 ml), beaker with spout (borosil capacity 100 ml), beaker with spout (borosil capacity 250 ml), beaker with spout (borosil capacity 500 ml), beaker with spout (borosil capacity 1000 ml), crucible silica (capacity 25 ml), crucible silica (capacity 50 ml), pipettes (borosil capacity 10 ml), pipettes pump polylab (capacity 10 ml), graduated measuring cylinder (borosil capacity 100 ml), graduated measuring cylinder (borosil capacity 250 ml), graduated measuring cylinder (borosil capacity 500 ml), graduated measuring cylinder (borosil capacity 1000 ml), pycnometer (capacity 500 ml), pycnometer (capacity 1000 ml), digital platform weighing machine (strictly as per technical specifications mentioned in the tender document), electronic weighing machine (strictly as per technical specifications mentioned in the tender document), digital concrete test hammer (strictly as per technical specifications mentioned in the tender document), digital+analog concrete test hammer (print version) (strictly as per technical specifications mentioned in the tender document), ultrasonic pulse velocity tester (strictly as per technical specifications mentioned in the tender document), structural imager (strictly as per technical specifications mentioned in the tender document), fully automatic mortar mixer (strictly as per technical specifications mentioned in the tender document), concrete mixer - pan type. 60 kg. with detachable pan (strictly as per technical specifications mentioned in the tender document), ground penetration radar (strictly as per technical specifications mentioned in the tender document)

CTN :39170326

21 Feb, 2025 NA

Vadodara - Gujarat

Tender For laboratory equipment - computer controlled servo hydraulic compression testing machine, mortar needle penetrometer, jolting apparatus with accessories, hydraulic shrinkage determination, rcc wall core cutting machine, cement mortar mixer, vibrating hammer for concrete mould, u shape box apparatus, l-box apparatus, fill box apparatus-kajima test, wheel borrow (deep), rapid chloride ion permeability test apparatus, for laboratory, cement mortar mould-70.6 x 70.6 x 70.6, cement mortar mould-50 x 50x 50, cement mortar mould-100 x 100x 100, plastic curing tank for concrete moulds, accelerated curing tank (48 cubes), laboratory cement autoclave, muffle furnace, hand gloves for oven, all in one computer system with printer

Loading, Please wait...

Construction Equipment Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector