Latest constructional item Tenders | Government constructional item Tenders

CTN :39118025

05 Feb, 2025 46.62 Lacs

Thiruvananthapuram - Kerala

Tender For supplying materilas for mgnregs - quarry waste, stone aggregate 40mm, stone aggregate 20mm, stone aggregate 10mm, coarse sand( zone 111), portland cement, tewisted steel/deformed bars

CTN :39078521

06 Feb, 2025 35.46 Lacs

Malappuram - Kerala

Tender For supply of materials - stone aggregate(single size):40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size):10 mm nominal size, quarry waste, coarse sand (zone lll), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wallform panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip, mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, wire nails, galvanized wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63mm, 200 mm aluminium aldrop, epoxy paint, gi plain washer thick, bitumen washer, galvanized steel j or l hook 8 mm dia, precoated galvanized iron profile sheet 0.050mm clt, paving block - inter lock 80mm thick m -30, fine sand, single clip, m.s tube 40 mm dia

corporations/Associations/Others

CTN :39111278

11 Feb, 2025 NA

Udaipur - Rajasthan

Tender For auction sale of rcc 75 dist jodhpur teh shergarh vill setrawa thumbawli etc quarry license sand

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :38974653

06 Feb, 2025 85.77 Lacs

Idukki - Kerala

Tender For supply of materials for works under mgnregs for a period of 6 months. - laying and jointing pvc pipe. heading, supplying stone aggregate(single size): 40 mm nominal size, supplying and stacking stone aggregate(single size):20 mm nominal size, supplying stone aggregate(single size):10 mm nominal size, supplying and stacking manufactured sand(coarse sand zone iii), portland cement 53 grade, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), quarry waste

CTN :39009113

10 Feb, 2025 28.95 Lacs

Thrissur - Kerala

Tender For supply of materials to various nregs (non agriculture)works in pariyaramgramapanchayat - supply of materials to various nregs (non agriculture) works in pariyaram grama panchayat, quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, solid blocks of size 30x20x15cm, coarse sand, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, red oxide zinc chromate primer, welding by electric plant, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, 200 mm aluminium aldrop, synthetic enamel paint in black or chocolate shade

CTN :39032473

31 Jan, 2025 40.29 Lacs

Thrissur - Kerala

Tender For supply of materials at work sites - mgnregs - stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone 3, portland cement, wall form panel 1250*500 mm, corner angel 45*45*5mm 1.50m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, quarry waste, m s tube 40 mm dia, twisted steel or deformed bars, interlocking cc paver block (80 mm thick m-30), stone aggregate 06 mm nominal size, stone for masonary work, g.i pipes 50 mm dia, g.i pipes 40 mm dia, red oxide zinc chromate primer, welding by electric plant, galvanised wire mesh of average width of aperature 1.4 and nominal dia of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35 mm thick, bitumen washer, stainless steel screws 50 mm, epoxy paint, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), through and bond stone size 24*24*39 cm, solid blocks of size 30*20*15 cm, pvc pipe 63 mm outer dia 4kgf/cm2, pvc bend 63 mm dia, fine sand (zone 4), bamboo 25 mm dia 2.5 m long

CTN :39032605

10 Feb, 2025 15.58 Lacs

Malappuram - Kerala

Tender For supply of different materials for mgnrega works - material supply, quarry waste, stone aggregate(single size):20mm normal size, stone aggregate(single size):10mm normal size, stone aggregate(single size):40mm normal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40mm), structural steel such as tees,angles,channels and r s joists, red oxide zinc chromate primer, sundries, galvanised wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35 mm thick, bitumen washer(50nos), stainless steel screws 50mm(50nos), sundries

State Government

CTN :39061175

30 Jan, 2025 3.48 Lacs

Baramulla - Jammu And Kashmir

Tender For elementary major repair at gms shudwani. - demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar, demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar., earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soil :, providing and laying of stone soling (hand packed) including ramming, dressing and watering all complete.(incl. all sorts of cost & carriage)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete as per direction of engineer incharge at site., random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) (quarry), providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete, brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand), labour for form work to retain the celing and truss as per direction of engineer incharge at site complete job, labour for dismantling wood work in frames, trusses, purlins and rafters etc as per direction of engineer incharge at site complete job, providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. 35mm first class kail wood complete job, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, painting with synthetic enamel paint of two or more coats on new work approved brand and manufacture on wet or patchy portion of plastered surfaces: as per direction of engineer incharge at site., providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, rise

Constructional Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government