Get complete information related to latest Corrugated Cardboard Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Corrugated Cardboard Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Corrugated Cardboard Tenders.
Tender For invited rate for cilvil material supply work at financial year 2025-2026 - flag stone (3 inch thickness), flag stone (4 inch thickness), metal red 40 mm, metal crushed 40 mm, metal crushed 20 mm, metal crushed 10 to 12 mm (including cost of spreading), granular sub-base material (including cost of spreading), metal crushed 6 mm (including cost of spreading), brick (open bhatta), brick (fly ash), over size metal (75-100 mm) including cost of spreading, boulder (including cost of spreading), moorum (including cost of spreading), hard copra (including cost of spreading), black cottan soil for plantation (including cost of spreading), stone dust (including cost of spreading), fine sand (narvda), sand (local), masonary stone( 8x8, 6x6 inch), mild steel / tar rod (6,8,10,12,16 mm), cement (isi mark), steel cross chanel frame work, w.c. sheet western (isi mark), w.c. sheet indian(isi mark), washbasin size 630x450 mm with apair of 15mm c.p brass pillar taps (isi mark), urinal 10 litr wit automatic flushing cistern (isi mark), pvc pipe 2 inch (isi mark), pvc pipe 3 inch (isi mark), pvc pipe 4 inch (isi mark), pvc pipe 6 inch (isi mark), gi pipe 2 inch, gi pipe 3 inch, gi pipe 4 inch, lime, distemper (with brand), paints (with brand), emulsion (with brand), paint for metallic item (with brand), paint for wooden item (with brand), primer (with brand), varnish (with brand), turpentine oil (with brand), melamine polish (with brand), granite different thickness, kota stone different thickness, ceramic tiles different thickness, white marble different thickness, glazed tiles different thickness, centering / shuttering, fancing barbed wire, gi chain line febric fencing with size 50x50 mm and 4mm dia wire, fancing pole (ht.-2.5m.), corrugated galvanised sheet with polymer coated, glass panes different thickness, anodied aluminium according to is:1868, powder coated aluminium, polyster powder coated aluminium, laminated particle board, ply board 8mm (waterproof standard brand ), ply board 10mm (waterproof standard brand ), ply board 12mm (waterproof standard brand ), ply board 16 mm (waterproof standard brand ), ply board 20 mm (waterproof standard brand ), mica sheet different thickness, m-30 grade 60mm paver block, stainless steel railing, galvanised fly proof wire gauze to windows with m.s flat, galvanised fly proof wire gauze to windows with m.s flat, angle iron post and strut, structural steel work including cutting ,hoisting ,fixing in diff. position, p.v.c sheet, labour rate (skilled), labour rate (unskilled)
Tender For providing and fixing of partition, particle board and toughened glass in hsvp office sector-12, palwal with complete in all respect and all other works contingent thereto ch to annual maintenance of hsvp office building sector-12 palwal
Tender For file storage unit, one shelves modularcompact storage unit. specifications number of shelves on e mode of supply knocked down to be assembled at consignee site by the seller modular compact storage uni t top 19mm thick commercial block board bwp grade conforming to is 1659 material for sides,bottom,shelf,shu tter of the storage unit 18 mm thick three layers pre-laminated both side particle boards matching with top s hade in grade-ii type-iii of is:12823/latest material of pedestal back 9 mm thick prelaminated particle board h eight of compact storage unit (+/- 10 mm) 1200 mm warranty period in number of years 1. [ warranty period: 12 months after the date of delivery ]
Tender For providing furniture to govt. coaching center ground floor auditorium room at atal bihari vajpayee layout in kalaburagi taluka under kkrdb macro for the year 2023-24. - acoustical wall paneling with square, supplying of tr invertor typesplit air conditioners, installation charges for split type air conditioner, supplying erecting testing and commissioning of voltage, polyester curtains, rectangular high density polyethylene, cpvc pipes, sinking of borewell of 165mm dia 50mtr, sinking of borewell of 165mm dia 100mtr, sinking of borewell of 165mm dia 150mtr, supply of isi mark 175mm nominal bore, ms casing caps, filter casing pipes, single phase pump sets, hdpe pipes, pvc insulated cable, gatevalve, non return valve, common control panel, new power capacitor, mcb1, labour charges for erection, labour charges for erection of indoor, steel wire cable, earthing wiring, midea split air conditioner, stainless steel adjustable shower curtain, princeboard magnetic green dry erase writing board, v j interior modular table with particle board table, indo modular table, h tech systems chair frame type cantilever full writing pad, elcor projector screen, ahuja speakers, laboratory steel furniture island bench with table top, high end wooden podium with mic holder, elegant style legs office chair, eliante other cuptype
Tender For custom bid for services - furnish cbbo room in office-9.17.2 providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board is: 3087 marked with one side decorative and other side balancing lamination grade i, type ii exterior grade is: 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)., main table, computer table, nsor fitting charge, revolving chair with knee tilt mechanism (market rate), revolving chair with knee (market rate), providing and fixing woven vinyl acoustical floorings with roll dimensions of 1.8/2mtr meterswidth and length of 20 meters or tiles size as percompany standard should be approved by architech.2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor.woven vinylflooring should have traffic classification 33, andweight of 2.7-3.5 kg/m2. flooring should havecaster chair en-985 tested with color fastness of more than 6. it should be astme662 qualified onsmoke density test. product must be fire rating ofthe product should be bfl-s1. any joints in flooring rolls should be sealed with cold welding. this workwill be inclusive of all labour, raw material, hardware, adhesive etc. complete. flooring will beprovided as per approved shade and colour in, as per the satisfaction of the architect and en, electrical work @15%.
Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/
Tender For supply of lockers steel bed side locker with having single door duly powder coated & top made of pre laminated particle board size 400mm (width)x350mm (depth)x700mm(height) independent lock make dol phin, nilkamal or similar. (remarks - 1) firm to submit one sample to consignee for approval before bulk su pply. 2) 31 no bhopal rr delivery@ 35 bagala et delivery ) [ warranty period: 30 months after the d ate of delivery ]