Tender For corrigendum : supply of bhukari pipe , cp brass bib cup short body , decorated looking mirror size 600mm x 450mm , wastage pipe plastic , forpranks steel , stop cock , tower bolt , iwc steel , wash basin , wicks for kero heater , tap steel , pvc connector for washbasin , puf tank 1000 ltrs , ewc , foot scraper iron , cp steel soap dish , carborator bukhari , bukhari pipe , bukhari bend , valve mixture steel , hamam rod iron , door locking chitkani , kitchen sink pipe set , angle batten holder , bulk head fitting , cp brass bib cup short body , cp brass bib cup long body , ss ewc with complete accessories , aluminium window jali 3x4 , cost hook with froing , sliding bolt , excaust pipe of vitreous china urinal complete with accy , cp brass bib cock short body , pvc connector for wasbasin , stainless steel jali , cp towel rail , corner shelf of toughened glass with chromium plated steel frame , carborator bukhari , cp brass bib cup long body , excaust pipe of vitreous china urinal complete with accessories , cp brass pillar cock , cp steel coat hook , stainless steel jali , iwc , fuel filter , oil filter , fuel feed pump , fan belt , bty 12v 180ah , air filter , head assy , push rod , alternator eng , cable 1 point 5sqmm , cable 2 point 5sqmm , oil bukhari , bukhari motor , switch and socket 15 amp with gang box , switch and socket 5 amp with gang box , white plastic ewc toilet seat cover , toilet jet spray set , gap filler foam loctite tite foam polyurethane comma white 500 gms , fd heating device bukhari complete set with tray , 63 amp on load change over switch in sheet enclosure with side handle tp , mcb 32 amp sp , mcb 32 amp dp , mcb 6 amp , mcb 10 amp , mcb 16 amp sp , mcb 16 amp dp , copper wire sc 1 sqmm , flexible wire 23 oblique 76 2 core twisted red and black 2 point 40mm outer dia , service cable 4mm , copper wire sc 1 point 5 sqmm , tape insulation 20mm width of 20 mtr , led bulb 15w inverter type , led bulb 20w inverter type , tube light 20w 4 double inch long inverter type , tube light 20w 2 double inch long inverter type , switch piano 6 amp , m seal black and grey , pvc waste pipe 32mm dia 750mm long urinal point , pvc waste pipe 110mm dia 6 mtr long wash basin , picket iron angle pole 8 double inch , 15mm bib cock short body , 15mm bib cock long body , coupling for wash basin , tower bolt 200mm , aluminium door handle , cgi sheet 12 double inch , hollow bricks 16 x 8 x 8 inch , iron sheets 1mm thickness 1200mm width and 14 foot long , steel crib 2 inch x 2 inch 6 inch , hinged clamps , screw clamps , hdpe sheet 13m x 8m , vinyl sheet 3mm , ismb 175 x 50m 6m long
Tender For supply of hot and coldinsulation c c - thickness , sr no 13 supply of preformed polyurethane foam puf insulation for chilled water pipelines in split pairs confirming to is 12436 of density 36 kg m3 for 300 nb pipe of 55 mm thickness , sr no 14 supply of preformed polyurethane foam puf insulation for chilled water pipelines in split pairs confirming to is 12436 of density 36 kg m3 for 350 nb pipe of 60 mm thickness , sr no 15 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 40 nb pipe of 40 mm thickness , sr no 16 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 50 nb pipe of 45 mm thickness , sr no 17 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 80 nb pipe of 45 mm thickness , sr no 18 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 100 nb pipe of 50 mm thickness , sr no 19 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 150 nb pipe of 50 mm thickness , sr no 20 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 200 nb pipe of 55 mm thickness , sr no 21 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 300 nb pipe of 55 mm thickness , sr no 22 supply of preformed polyurethane foam puf insulation for chilled water pipelines supports in split pairs confirming to is 12436 of density 120 kg m3 for 350 nb pipe of 60 mm thickness , sr no 23 supply of open weave glass cloth 10 x 10 mesh for applying over polyurethane foam puf insulation , sr no 24 supply of cold insulation sticker such as mastic-83 for application under polyurethane foam puf insulation. , sr no 25 supply of vapour barrier mastic such as mastic-131 for application over polyurethane foam puf insulation. , sr no 26 supply of aluminium strip roll of 0. 5 to 1 mm thickness and 10 mm width for securing insulation over pipe duct
Tender For corrigendum : supply of various type of fittings & ferrules for imd-1,2,3 & 7 of wanakbori tps. - ss316 male connector fitting fitting size: 3/8"x1/4" npt (m), ss 316 1/4 inch npt male connector suitable for 6 mm od tube, tube end thread size: 7/16-20 with one nut and one set of ferrule & back ferrule, 1/2 inch x 1/4 inch od brass male connector, qsl-1/4-8 push in male elbow connector 1/4" x 8 mm pu tube for 4., pu-8 union fitting, ss elbow fitting : 1/4" x 1/4" (m npt), brass 1/4" o.d.of tube x 1/4" npt male connector assembly with one olive and one nut (bsp threads), male dummy plug 3/8 ss male npt fitting, male dummy plug 1/4 ss male npt, m.s. pipe socket (female), size: 1/2" bsp, qst 8 push in equal tee connector for 8 mm od pu tube for 4, qs-1/2-8 (d-3/8-1/2-a+qs-3/8-8) push in straight connector 1/2 x 8 mm od pu tube for 4., qs-1/4-8 push in straight connector 1/4 x 8 mm od pu tube for 4., qsl-3/8-8 push in male elbow connector 3/8" x 8 mm pu tube for 4., qst-1/4-8 push in tee male connector for 1/4x8mm pu tube for 4., qsl-1/2-8 push in male elbow connector for 1/2x8mm pu tube for 4., pum-8 x 1.25 bl polyurethane tubeing 8 mm od blue color., brass flare nuts suitable for 1/4" o.d.of tube, brass male connector 1/4"x1/4" bsp, brass ferrules 3/8 ", brass male connector 1/4"x3/8" bsp, ci ball valve screw ends size: 1/2", full wave brass gate valve size:1/2", compression tube brass fitting, male/female reducer with one nut & one olie for male, size 3/8" (f) x 1/2" (m) bspt., brass 3/8" o.d.of tube x 1/4" npt male connector assembly with one olive and one nut (bsp threads), 1/2 inch x 3/8 inch od brass male connector, 1/4 inch brass nut with ferrule, 3/8 inch brass nut with ferrule, brass union tee with nut and ferruls 1/4" x 1/4" x 1/4", brass fitting:m/f adopter 1/4 bsp (m) x 1/4 bsp (f), brass fitting:m/f adopter 1/2 bsp (m) x 1/2 bsp (f), 3/8" x 3/8" brass valve inside thread, 1/4" x 1/4" brass valve outside thread, ss 1/4" od (std) double ferrule compression fitting, ss 1/2" od double ferrule compression fitting, ss 3/8" od double ferrule compression fitting, 3/4 inch ss nut with front ferrule and back ferrule, ss tube fitting ss 316 1/2"npt m x to suit 1/2"od ss tube with nut and ferrule, 3 way gauge cock, matl: ss-316, process conn: 1/2 inch nptf to suit 1/2 inch od ss tube, ss 316 union tee suitable for 6 mm od tube, tube end thread size: 7/16-20 with three nuts and three sets of ferrule & back ferrule, ss nipple size: 1/2"x100 mm, s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., ss 316 hex bolt with nut size m10x60 mm full thread with plain washer, 3/8" od 316 ss x 2 mm thick ss tube, pressure guage fittings(adapter) 1/2" bsp(m) x 3/8" bsp(f), qs-3/8-10 push in connector for 4., qs-1/4-6 push in straight connector 1/4 x 6 mm od pu tube for 4., qs-3/8-6 push in straight connector 3/8 x 6 mm od pu tube for 4., qs-1/2-6 push in straight connector 1/2 x 6 mm od pu tube for 4.
Tender For supply and installation of cold insulation with preformed/insitu polyurethane foam (puf) with ancillaries and cladding for chilled water supply system piping and pipe fittings at various locations inside reactor building and reactor auxiliary buildin
Tender For supply of flexible corrugatedpolyamideconduit of size nw 70 (id 66.5+/- 0.3mm, od 80.0+/- 0.2mm) as per rdso spec no. rdso/pe/spec/ac/0138-2009 rev 2 or latest.