Latest cortical screw Tenders | Government cortical screw Tenders

CTN :37788314

18 Dec, 2024 NA

Kolkata - West Bengal

Tender For bid to ras supply of slace preferably variable angle volar locking plate 2.4 slace 2.7mm, 6 to 8 holes with , distal radius fixed slace preferably variable angle volar locking plate 2.4 slace 2.7mm, 6 to 8 holes with 7 , cannulated tibial nail with 5 proximal locking and 4 distal locking options, 255 to 435mm length in 10 to 15mm , radial head rim plate 2.4mm, 2 to 4 holes, with 01 cortical screw and remainder locking head screws , distal humerus anatomical medial plate 3.5mm all sizes, left or right, complete construct with 80 percent locking head screws and 20 percent cortical screws , distal humerus anatomical posterolateral plate 3.5mm all sizes, left or right complete construct with 80percent locking head screws and 20 percent cortical screws , polybutylate coated braided polyester size 2slace 5, 1slace 2 circle taper cut, 45 mm single needle ethibond, sterile foil with single thread , hip arthroplasty drape set compliant with aami pb70-2012 level 4 standards , trauma drape pack for upper limb consisting of one impervious u drape, one impervious of drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. , knee arthroplasty drape set , sterile disposable knee arthroscopy drapes pack with fluid collection bag with suction port and tube holders , trauma drape pack lower limb consisting of one impervious u drape, one impervious of drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. , sterile disposable shoulder arthroscopy drapes pack with fluid collection bag with suction port and tube holders , vicryl no 2 with os needle , 4.5 slace 5 slace 5.5mm anatomical lcp for distal femur 05 slace 16 holes with 80 percent locking head fully threaded solid slace cannulated screws and 2 cortical screws complete construct. , 4.5mm narrow lcp with combi-hole technology, plate length 8 to 16 holes, with 40 percent cortical screws and 60 percent locking head screws , antirotation proximal femoral nail with screws assorted sizes

Central Government/Public Sector

CTN :38604228

21 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of main breather kit for vande bharat/ts coach transformers, each kit containing 1 nos. of air dryer - big part for jst article no. 1066209r000, 1 nos. of o ring gasket dia. 5.33 int 66.04 jst article no. 1 075895r000, 4nos. of screw hm 12 -60 a4 80 jst article no. 1056029r000, 4 nos. of washer le 12 a4 jst article no. 1051768r000, 4 nos. of washer m 12 a4 jst article no. 1044330r000, 4nos. of nut h dia. m12 a 4 80 jst article no. e032405. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604229

21 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of drain filter valve kit for vande bharat/ts coach transformers, each kit containing 1 nos. of v alve jst article no. 1075613r000, 4 nos. of screw hm10-30 a4-80 jst article no. 1070568r000, 4 nos. of w asher m10 a4 jst article no. 1044329r000, 1 nos. of o ring gasket 3.53 int 53.57 jst article no.1075891r0 00. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604367

19 Dec, 2024 NA

Bengaluru - Karnataka

Tender For supply of lcp postero-medial proximal tibial anatomical stainless steel plate 3.5mm t hickness , 3-10 holed of assorted sizes with locking and cortical screws of diameter 3. 5mm of length 10mm to 110mm instrumentation box to be provided during surgery ]

Central Government/Public Sector

CTN :38569016

03 Jan, 2025 NA

Perambur - Tamil Nadu

Tender For supply of srph401402-proximal femur locking plate- set containing 4.5mm proximal femur locking plate with multiple locking screw option in the proxmial femur, anatomically bowed shaft, both lo cking and non locking in every screw hole with right and left options. the set should consist of e ight locking screws and 2 cortical screws (all possible length needed for proximal femur fixation). each set supplied with complete set of instrumentation. unit: no. ]

CTN :38491977

27 Dec, 2024 6.00 Lacs

Sheopur - Madhya Pradesh

Tender For supply of orthopedic, neuro and dental implant equipment district hospital sheopur - name of ortho implant, nailing system for trauma, interlocking nail for tibia- all sizes with 4 lockingbolt set, expert tibial nailing system (titanium) all sizessystem with all bolts set, distal tibia nail - all sizes with 4 locking bolt set, interlocking nail for femur - all sizes with 4 lockingbolt set, supracondylar nail - all sizes with 4 locking bolt set, distal femur nail multilock all sizes with locking bolts, proximal femur nail all sizes with all locking bolts -short and long, proximal femur nail a2 (stainless steel) - shortpfn /long pfn all sizes with locking bolt set, proximal femur nail a2 (titanium) - short pfn /long pfn all sizes with locking bolt set, proximal humerus multi lock nail- all sizes withlocking bolts, interlocking humers nail- all sizes with 4 locking boltset, k nail for femur- all sizes set, square nail radius with screw set (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, titanium elastic nailing system (tens)-all size (dia.2mm,2.5mm,3mm,3.5mm,4mm,4.5mm)(length 44 cm), plating system for trauma, ao trauma mini set - stainless steel andtitanium, ao trauma small set - stainless steel andtitanium, ao trauma standard set - stainless steel andtitanium, dynamic compression plate (d.c.p.small 3.5mm)radius/ulna complet set with screw, d.c.p.narrow for tibia / humerusall sizes with 4.5cortical screw compleate set, d.c.p.broad (4.5 mm )for femur - all sizes with 4.5cortical screw and screw hole set, l.c.p.plate small (3.5 mm) all sizes with locking screwhole set, l.c.p.plate narrow (4.5 mm) with screw complete set-all sizes, l.c.p.plate broad (4.5 mm) with screw complete set, reconstruction plate non locking 3.5mm- allsizes with 3.5 cortical screw set, reconstruction plate locking 3.5mm - all sizeswith 3.5 cortical screw set, reconstruction platenon non locking 4.5mmwith screw complete set, reconstruction plate locking 4.5mm with screwcomplete set, semi tubular plate 4-12 hole all sizes with screws holeset, one third tubular plate 4-12 hole all sizes withscrews hole set, clavicle lateral end plate with screws set, clavicle hook plate with screws set, clavicle locking precontoured plate 6-10 holewith locking screws set, proximal humerus locking plate (philos) set - 4-12 hole) plate with required locking screw set, distal humerus locking compression plate -medial &lateral(allsize with screw), lcp extraarticular distal humerus metaphyseal locking plate 4 to 12 hole (all size with screw), lcp radial head plate (all size with screw), locking olecrenon plate (all size with screw), hook plate olecranon plate (all sizes withscrews), distal radius locking plates (right / left) 4-8hole, distal radius t plate all sizes with screws, distal radius l plate all sizes with screws, distal radius locking plate variable angle 2.7mm and 2.4 mm system all sizes with screws, distal radius rim plate all sizes, mini plate and screws 1.5mm/ 2mm/ 2.7mm set for metacarpals and phalanges, dhs system with d.h.s.plate (round hole ) angle 125*, 130*, 135*, 140*, 145* short barrel 4-18 hole, long barrel 4- 18 hole, lag screw with compression screw 50-130 mmcortical screw (4.5 mm size 16mm-40mm), d.h.s.with trochanteric support plate with lagscrew comp.setall sizes (4-8 hole) & required cortical screws set, pfn with trochanteric support plate all sizes, proximal femur locking plate all sizes, femoral neck system (fns) all sizes, d.c.s.plate 95* 4 hole to 12 hole, angled blade plate - all sizes with screws, double angled blade plate with lag screwall sizes (4-10 holes) with required cortical screws set, pediatric d.h.s.all sizes with 3.5mm cortical screw set, distal femur locking plate (lateral) (dflcp) 6-18hole, proximal tibia locking plate (ptlcp) 6-15 hole, raft locking plate for proximal tibia setall sizes (5-8 hole) with locking screws, l buttress plate right/left all sizes with

CTN :38495516

23 Dec, 2024 NA

Howrah - West Bengal

Tender For supply of 3.5 mm proximal medial tibial locking plate left & right with 6 locking and 3 cortical screws made of titanium or mri compatible stainless steel

CTN :38444708

24 Dec, 2024 NA

Datia - Madhya Pradesh

Tender For purchase of implants in govt medical college datia - d.h.s. plate long/short barrel (38/25 mm)with round, d. c., combi hole 1250, 1300, 1350, 1400 angle; 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 holes, d.h.s screw 22mm /16mm threading with compression screw (top-bolt). (36 mm) 50 to 115 mm, in 5mm increments, pediatric d.h.s. set, d.c.s plate (950) with round, d. c., combi holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 holes, angle blade plate (950) with round, d. c., combi holes, blade size 50, 55, 60, 65, 70 & 75 mm and 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 holes, trochanteric stabilisation plate to be used with dhs, distal femur locking compression plate (right & left) anatomical pre-shaped & contoured with self-tapping locking head screws; with round locking holes for metaphyseal portion of plate & combiholes for shaft of plate., medial & lateral proximal tibial buttress plate (t- & l- shape)- as per ao specifications. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal medial & lateral tibial plate 3.5 mm(right & left) anatomically pre shaped and low profile. two different plate design for left and right side with indication on side of plate. plate should have 2 mm holes for proximal fixation with k-wire and sutures for meniscal repair. holes should accept 3.5 mm locking head or 3.5 mm standard cortical screws from 4 to 20 holes with increment of 2 holes., proximal medial/ lateral tibial locking plate for 4.5 mm screws anatomically pre shaped and low profile design, two different plate design for left and right with indication on plate. round metaphyseal locking holes and combi holes in shaft portion for locking and standard screws. different angulation in proximal part of the plate to avoid primary and secondary loss of reduction. should be compatible for less invasive technique holes should accept 5 mm locking head or 6.5 mm standard cancellousl screws from 5 to 13 holes, hockey plate for tibia (right & left) 5, 7, 9, 11, 13, 15, 17 holes, contoured medial/ antero-lateral plate for lower end tibia 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, distal medial tibial locking plates 2.7/ 3.5 mm. anatomically pre-shaped and low profile and specific for right and left side with indication of side on plate, compatible with less invasive fixation. rounded edges screw heads should be received into distal section of plate to allow multiple locking head screw placement of 2.7/ 3.5 mm to provide adequate fixation of metaphyseal portion of tibia, and size 4 to 14 holes with increment of 2 holes., anterolateral distal tibial locking plate 3.5 mm. anatomically pre shaped and low profile and specific for right and left side with indication of side on plate. plate should have head holes to accept 3.5 mm locking head or standard cortical or 4 mm standard cancellous screw. head should be received into the plate. size from 5 to 21 holes with increment of 2 holes, cobra head plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, cobra head locking plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook locking plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal humerus locking plate (philos plate). anatomically pre-countoured plates, should have precisely fitting sleeves for precision placement ofscrews, should accept 3.5 mm locking head screws. the screws provided should be available from 26 to 60 mm length. the head of the plate should have holes for securing tuberosities to the plate with sutures. should have low profile of the screws heads to prevent tissue irritation 3, 4, 5, 6, 7, 8, 9, 10, 12 holes, (a) anatomically pre-countoured plates for distal medial humerus for anatomical fit with left & right version. should have precisely fitting sleeves for precision placement of screws. should accept self-tapping locking head screws. the shaft portions of the plate should have combi holes. should have low p

Central Government/Public Sector

CTN :38466130

31 Dec, 2024 NA

Bhusawal - Maharashtra

Tender For 13129 - cortical screws, 1.size- 2.7mm x 18mm, 2.made of- titanium, 3. fully threa ded, 4.should be locking/non-locking, 5. non-cannulated, 6.self-tapping, 7.head- hexagonal, 8. shoul d supply all related instrumentations of various sizes at the time of surgery. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

Cortical Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector