Latest cortical screw Tenders | Government cortical screw Tenders

CTN :44107844

02 Mar, 2026 NA

Gaya - Bihar

Tender For supply of warming blankets whole body electric heating blanket , pressure sequential compression device pneumatic compression device , bone cutting and drilling system complete set with saggital saw hand piece oscillating blade type with set of 5 drill hand piece jacobs chuck 0 to 1 cannulated , bone cutting and drilling system reamer set with 8mm fixed head flexible reamer flexible reamer shaft detachable 8mm dia detachable reamer heads 85mm to 12mm with , saw plaster cutting electric components as under , weights for extension set of 6 complete with hanger , bed traction kit size universal , operating steel chair with back cushion four wheel revolving adjustable height , air support mattress ripple bed , x-ray film illuminator slim with led light source single panel for film size 35 x 43 cm in the panel 220 v 50 hz ac single phase , box viewing negative fluorescent tube day light 61cm 2 ft 20 watts for , drill twist s s dia 2 point 4 mm length 7 point 62 cm , drill twist s s dia 2 point 8 mm length 7 point 62 cm , drill twist s s dia 4 mm length 7 point 62 cm , drill twist s s dia 4 point 4mm length 7 point 62cm , drill twist s s dia 4 point 8 mm length 7 point 62 cm , drill twist s s dia 6 point 4 mm length 7 point 62 cm , drill twist ss dia 2 point 0 mm length 10 point 16 cm 4 mm , drill twist s s dia 2 point 4 mm length 10 point 16 cm , drill twist s s dia 2 point 8 mm length 10 point 16 cm , drill twist stainless steel dia 3 point 2 mm length 10 point 16 cm , drill twist s s dia 4 point 00 mm length 10 point 16 cm , drill twist s s dia 4 point 4 mm length 10 point 16 cm , drill twist s s dia 4 point 8 mm length 10 point 16 cm , drill twist s s dia 6 point 4 mm length 10 point 16 cm , drill twist s s dia 2 mm length 12 point 70 cm , drill twist s s dia 2 point 3 mm length 12 point 70 cm , drill twist s s dia 2 point 8 mm length 12 point 70 cm , drill twist s s dia 3 point 1 mm length 12 point 70 cm , drill twist s s dia 3 point 3 mm length 12 point 70 cm , drill twist s s dia 3 point 9 mm length 12 point 70 cm , drill twist s s dia 4 point 4 mm length 12 point 70 cm , drill twist s s dia 4 point 8 mm length 12 point 70 cm , drill twist s s dia 6 point 4 mm length 12 point 70 cm , drill bits h s s long length 2 point 5 mm , drill bits h s s long length 3 point 2 mm , drill bits h s s long length 4 point 5 mm , drill guide eccentric cortical screw xl 3 point 5 mm , drill guide eccentric cortical screw xl 4 point 5 mm , drill guide neutral cortical screw xl 3 point 5 mm , drill guide neutral cortical screw xl 4 point 5 mm , drill taps cortical screw xl 3 point 5 mm 20 tpi , drill taps cortical screw xl 4 point 5 mm 14 tpi , ilizarov instrumentation set complete with accessories components as under , screw cortical set complete , screw cancellous and malleolar set complete , spirometer

CTN :44156107

03 Mar, 2026 NA

Hyderabad - Telangana

Tender For supply of cetyl alcohol 2 65 stearyl alcohol 0 26 125ml , coal tar 6 v w salicylic 3 ointment 50gm tube , betametnasone 0 4 salicylic acid 3 cream 20gm tube , nadifloxacin 1 gel tube of 15gm , betamethasone dipropionate usp 0 05 mg and gentamy , ciclopirox 1 0 zinc pyrithione 1 0 shampoo 120 ml , clobetasol 0 05 salisylic acied 3 coal tar 5 lotion 100 ml , shampoo flucinolone acetonide 0 01 w v 60ml , purified water propylene glycol cyclomethicone emulsifing wax gly , procapil based hair serum boitnyl gh apigenine 75ml , cream propyleneglycol 15mg lacithin squalene tube of 100gm , permethrin 1 cream rinse same as perlice 60gm , tranexamic acid 10 0 kojic acid 2 0 arbutin 1 5 mulbery ex , fluticasone muprocin ointment equivalent to flutibact , tab methylprednisolone 4mg , ioratidine 10 mg tab , tab minoxidil 2 5 mg , kojic acid 2 hydroquinone 2 latic acid 0 2 antipol , ultrasound jelly tube of 250 gm , expert tibial nail of 10 mm dia with 3 innovation locking option with , 3 5 mm titanium proximal lateral tibial locking plate 4 14 hole , normal saline fluid 3 ltr , sterile disposable knee arthrosscopy drape with fluid colle , disposable waterproof sterile c arm image intensifier cover , sterile adhesive conforming soft non woven fabric dressing , sterile disposable monopolar electro cautery pencil pen wi , postoperative presterile silver hydrofibre waterproof orth , postoperative presterile silver hydrofibre waterproof orthopa , powder free gamma sterilized orthopaedic gloves with textu , 3 5 mm cortical screw titanium all sizes , 3 5 mm locking head screw all sizes titanium , drill bits h s s long length 2 5 mm , schanz pins 4 5 mm for cortical bone in femur tibia stainless steel , 2 8 mm titanium screw in anchors with high low threads de , 4 5 mm lcp proximal femoral locking plate titanium 6 12 hole , proximal femoral nail anterotation side specific titanium , sterile disposable pulse lavage system usfda approved , disposable concentric needle diameter 0 46 mm l 37 , ten 20 eeg paste jar 228 gm 25 pcs pkg , nuprep gel tube 114 gm , ag agcl disposable pregelle 34 22 mm electrode pkt of 100 pcs , coated gold cup eeg electrode pkt of 10 pcs , vaccum assisted closure wound care system disposable , distal radius volar locking plate bicoluminar type 3 4 a , h1n1 mask , tetanus toxoid purified absorbed rubber capped vial of 5 ml 10 doses , tobramycin 300 mcg respuless , serachem lysing reagent 500 ml , serachem cell clean 50 ml , serachem cell diulent 20 ltrs , seracheck h 3x2 5 ml , seracheck l 3x2 5 ml , seracheck n 3x2 5 ml , thermal printer paper roll 57 mm x 20 mts 55 gsm width 57 mm , coverslip glass 22 x 50 mm , aqua chrom ecc , hemacolour 3x 100 ml rapid stain for blood smear , coplin jar //bid details2 / 49

CTN :43020671

13 Mar, 2026 NA

Delhi - Delhi

Tender For corrigendum : tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along wit

CTN :44061570

10 Mar, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of distal tibial medial low profile periarticular plating system left or right complete titanium , inter locking universal tibial nails 10 x 345mm , inter locking universal tibial nails 10 x 330mm , inter locking universal tibial nails 10 x 315 mm , cannulated tibial nails for fractures of proximal distal third tibia with 5 x 4 mm locking bolts , ao type external fixator set for femur consisting of stainless steel 12 x single pin to tube clamps , ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel , antegrade femoral nail system complete construct right or left with 04 locking bolts and 01 end cap ss , anterolatereal distal tibial periarticular plate system left or right 06 locking titanium , proximal femoral anatomical locking plate right or left complete 06 cortical screws stainless steel , proximal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws titanium , distal femoral nail left or right complete titanium , distal radius locking plate variable angle complete construct with 6 locking and 3 cortical screws titanium , interlocking humeral nail cannulated for humerus complete titanium , lc dcp plate narrow 10 hole , titanium elastic nail with end cap , distal humerus anatomical medial plate 3 pt 5 mm left or right complete titanium , distal humerus anatomical posterolateral plate 3 pt 5 mm left or right complete titanium , distal humerus anatomical medial plate 3 pt 5 mm left or right complete stainless steel , distal humerus anatomical posterolateral plate 3 pt 5 mm left or right complete stainless steel , tibial nailing system expert type titanium consisting size 8 , drill bits solid 2 pt 5 mm , drill bits solid 3 pt 2 mm , drill bits solid 3 pt 5 mm , drill bits solid 4 pt 5 mm , calibrated cannulated drill bits h pt s pt s pt 250 mm length 4 pt 5 mm 3 faced chuck , short proximal femoral nail antirotation left or right complete titanium , short proximal femoral nail left or right complete titanium , cannulated screw 4 pt 5mm self tapping short thread 72 mm , cannulated screw 4 pt 5mm self tapping fully threaded 26mm , cannulated cancellous screws dia 7 mm fully threaded ti 316l ss , cortical screws mini fragment 2 pt 7 mm titanium , cannulated cancellous screws dia 6 pt 5 mm washer ti , cannulated cancellous screws dia 6 pt 5 mm 316l ss , schanz screws 2 pt 5mm self drilling and stainless steel pt , ao type joint spanning external fixator complete set //bid details2 / 33

State Government

CTN :44022453

23 Feb, 2026 NA

Dharwad - Karnataka

Tender For supply, installation, testing, and commissioning (sitc) of specialized laboratory furniture - supply and fixing of furniture work for laboratory at nfsu dharwad campus, c-frame m-island (crca) - 4560 mm (l) x 1260 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (62 sq ft) assembly of construction for work bench: c frame systems are the modern lab furniture architecture. based on a cantilevered design, c-frame systems do not need legs for support. c-frames assemblies are manufactured from standard hollow metal sections, confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components are of crca confirming to is code 513:1994. the suspended under-bench welded units are supported on heavy-duty steel frames fully carrying the load of worktops. c-frame are constructed from a rectangular pipe with a cross section of 60mm x 30 /40 mm and 1.6/2 mm thick, are without a vertical front leg to give a clean look. the c-frame legs are supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the structure has removable back panel (wherever required as per design finalization) to provide access for maintenance throughout the length of table. the structure shall be duly treated for the rust prevention and coated with epoxy powder coated (with minimum thickness of 60 micron). the horizontal frames connecting the c frames and other required frames shall be of the similar specifications. together with the c-frames and horizontal members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide one drawer two shutter with one shelf storage, 2 no wheel lockable + 2 no wheel non lockable (qty - 6) structure - 60 mm x 30 mm x 1.6 mm ms pipe (qty - 5) filler panel - removable panel 600mm to 900 mm (qty - 12) - filler panel (qty - 2) reagent rack - double side double tire reagent rack - (qty - 3) electrical module - 3m plate with 16/6 amp socket and 16 amp mcb or switch (make: havells/anchor / norysis/equivalent) (qty - 12), plinth m-wall (crca) - 1400 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (11 sq ft) material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide two shutter under sink (qty - 2) filler panel - filler panel (qty - 2) sink & tap - polypropylene sink 560x355(qty - 2) - three-way swan neck cpve & brass faucet (qty - 2), d-frame m-wall (crca) - 1200 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabine

CTN :43988863

23 Feb, 2026 NA

Gaya - Bihar

Tender For supply of fragment 3 point 5 mm tt assorted size , cannulated cancellous screws 4 point 0 mm partially threaded tt assorted size , cortical screws mini fragment 2 point 7 mm tt assorted size , cancellous screws mini fragment tt assorted size , locking screw large fragment 5 point 0 mm tt assorted size , locking screw small fragment tt assorted size , locking compresion plate combination hole small fragment 3 point 5 mm with 4 cortical and 4 locking screws titanium , dynamic compresion plate dcp large fragment 4 point 5 mm titanium , dynamic compresion plate low contact lc dcp large fragment 4 point 5 mm titanium , locking compresion plate combination hole large fragment 3 point 5 mm with 6 cortical andf 4 locking screws titanium , dynamic compresion plate dcp small fragment 3 point 5 mm tt assorted size , locking compresion plate combination hole small fragment 3 point 5 mm with 4 cortical andf 4 locking screws tt assorted size , clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws left or right side titanium , tab clavicular anatomical plate 3 point 5 mm complete construct for left or right side with 6 cortical screws titanium , tab distal end clavicular plate right or left low profile with 4 locking and 4 cortical screws complete construct titanium , tab proximal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws titanium , distal humerus extraarticular plate 3 point 5 mm left or right complete construct with 6 locking and 4 cortical screws titanium , distal humerus anatomical medial plate 3 point 5 mm left or right complete construct with 6 locking and 4 cortical screws titanium , distal humerus anatomical posterolateral plate 3 point 5 mm left or right complete construct with 6 locking and 4 cortical screws titanium , olecranon plate anatomical 3 point 5 mm right or left complete construct with 6 locking and 4 cortical screws titanium , distal radius volar locking plate complete construct with 6 locking and 3 cortical screws titanium , distal radius locking plate variable angle complete construct with 6 locking and 3 cortical screws titanium , distal radius lcp t plate 3 point 5mm complete construct with 3 locking and 3 cortical screws titanium , clavicular hook plate lcp complete construct with 03 cortical screws and 02 locking screws left or right side stainless steel 316l , distal femur lateral periarticular locking plate left or right complete construct with 06 locking cancellous screws 04 cortical screws and 04 locking screws titanium , proximal tibial lateral periarticular locking plate system left or right complete construct with 04 metaphyseal locking cancellous screws 02 cortical screws 03 locking screws titanium , proximal medial tibial locking plate system left or right complete construct with 03 locking screws and 03 cortical screws titanium , anterolatereal distal tibial periarticular plate system left or right complete construct with 06 locking and 03 cortical screws titanium , distal tibial medial low profile periarticular plating system left or right complete construct with 06 locking screws and 03 cortical screws titanium , calcaneum anatomical plate system right or left low profile complete construct with with 6 locking screws titanium , locking eight plate for hemi epiphysiodesis with compatible locking screws tt , high tibial osteotomy fixed angle plating system , titanium elastic nail with end cap , interlocking humeral nail cannulated for humerus complete construct with 04 interlocking bolts and 01 end cap titanium , antegrade femoral nail system complete construct right or left with 04 locking bolts and 01 end cap titanium , long //bid details2 / 57proximal femoral nail antirotation left or right complete construct with 02 lag screw 02 locking bolts 01 end cap titanium , short proximal femoral nail antirotation left or right complete construct with 01 spiral blade 02 locking bolts 01 end cap titanium , distal femoral nail lef

State Government

CTN :43982252

24 Feb, 2026 98.34 Lacs

Chandigarh - Chandigarh

Tender For providing new furniture items in library at punjab vidhan sabha - supply of 8 seater reading table (2350 x 1150 x 740) having following specificationsproviding and placing work table of size 2350 mm (w) x 1150 mm (d) x 740 mm (h). worktop shall be made of 25 mm thick mdf one side pre-laminated board conforming to is:14587:1998 with 0.4 mm pvc membrane pressed on top and having chamfered edges, with access panels provided with soft-closing hinges. understructure shall consist of a combination of 25 mm and 18 mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with anodised aluminium alloy 63400-wp profile added at bottom edges for improved aesthetics; construction shall be of knock-down type. wire raiser shall be made of 0.8 mm crca ms conforming to is:513, epoxy polyester powder coated (dft 40 60 microns) for carrying wires and cables, with cutout provision below access flap at two locations for standard 8-module anchor roma, and additional cutouts with plates shall be provided beside each for mounting audio visual cables (e.g. hdmi, vga-a, etc.). this product should be certified by greenguard, iaq gold, greenpro and griha. as per sample selected, supply of book rack (1200w x 595d x 2078h) having following specificationsproviding, supplying and placing bookracks with body side panels, frame and cross l-brackets made of 0.8 mm crca sheet conforming to is:513. the assembly shall consist of 2 tie rods, 4 fixing brackets and 2 turnbuckles, with tie rods of 4 mm diameter ms arranged in x shape and fixing brackets made of 2 mm thick crca sheet conforming to is:513. wooden panel shall be 25 mm thick plt board of e1-p2 grade with edges machine pressed with 2 mm thick pvc lipping glued with hot melt eva adhesive. understructure shall be made of 0.8 mm crca (is:513) of size 1200 mm (w) x 595 mm (d) x 80 mm (h) for single body. shelves shall be 10-bend panels made of 0.8 mm crca sheet (is:513), placed on shelf supports and fixed using nut and bolts from below, consisting of 6 loading levels formed by 5 adjustable shelves for each main and add-on unit, each shelf with uniformly distributed load capacity of maximum 80 kg. construction shall be completely knock-down type. all ms sheet metal and frame components shall be epoxy polyester powder coated to a minimum thickness of 45 microns. add-on units shall be stackable widthwise to form a bank of racks with common side panels up to 4800 mm width. shelves shall have back stiffeners at the rear side made of 0.8 mm thick crca (is:513) acting as separators. label holder shall be aluminium extrusion of 596 mm length fitted on the front of body, with 300 gsm matt finish paper insert of 596 mm length. book separators shall be made of 2 mm thick crca sheet (is:513), serving as partitions and supports for vertically placed books. this product should be certified by greenguard ,iaq gold . as per sample selected, supply of reception desk (2400w x 725d x 740h) including drawer unit on both sides and pedestal having following specifications supplying and placing in position reception table of size 2400 mm (l) x 725 mm (d) x 740 mm (h), the work surface shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with access flap and grommet provided for wire management. wire management shall include a power box made of 0.8 mm thick crca sheet conforming to is:513 with switch plate provision of 8+3 module anchor roma, fixed along the worktop width at access flap position. modesty panel and side skirting shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990 with 2 mm thick pvc lipping. understructure shall be made of 18 mm thick pre-laminated twin board of e1-p2 grade, edge-banded with 2 mm thick pvc lipping. top shelf shall be of 18 mm thick pre laminat

Central Government/Public Sector

CTN :43994234

26 Feb, 2026 NA

Solapur - Maharashtra

Tender For supply of screews 2.7mm cortical screws 16mm

Central Government/Public Sector

CTN :43994491

26 Feb, 2026 NA

Solapur - Maharashtra

Tender For supply of screw 2.7mm cortical screws 18mm

Central Government / Public Sector

CTN :43953749

26 Feb, 2026 NA

Multi City - Multi State

Tender For supply of light weight tent pre-fabricated water proof for art equipments & crane equipments.firms shall offer clause wise compliance for the attached specification, else their offer will be summarily rejected.annexure- atechnical specification of light weight tent prefabricated waterproof (for art equipment and crane equipment)s.no description value1. product dimension (lxwxh) (16-18ft)x(12-14ft)x(8ft)2. item weight max 30 kg3. shape rectangular/square4. occupancy 10 persons5. included components poles. connectors, pole bags, inner tent, outer sheet. tent pegs, pegs carry bags, tent wheel bag, manual, floor mat, door and window with mosquito net and other accessories required to erection and folding6. water resistance yes (2000 to 5000 mm)7. special features suitable for all seasons, wind resistance up to 20 kmph. easy to stand and assemble by 4 people within 10 minutes.8. tent material components:fly outer fabric 410 gsm og w.p.polyster viscose dope dyed to specification no.- pro/4369/fwppv/rip/tc-11/1(a) for dyed tent.linen inner - fabric green 205 gsm polyster viscose dope dyed as per specification no.-prov/s/4569/fabric green pv/tc-11/29(b). (for dope dyed tent)end curtain -410 gsm og w.p. polyster viscose dope dyed to specification no.-prov/4369/fwp pv/rip/tc-11/1(a) lined with fabric green 205 gsm polyster viscose dope dyed as per specification no.-prov/s/4369/fabric green pv/tc-11/2(b). (for dope dyed tent)metal component - as per specification no. cqa(gs)/us/467/(d)9. availability of tent report from nabl/ilac accredited or central government lab to prove conformity of products to specification. yes10. test report to be furnished to buyer on demand yes11. installation & demonstration at consignee location12. warranty as per irs condition

Cortical Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector