Latest cr sheet Tenders | Government cr sheet Tenders

CTN :39170757

12 Feb, 2025 NA

Salem - Tamil Nadu

Tender For purchase of furniture - furniture, computer table (single) size: 30 x 21 x 48 (lxbxh) table body 18mm plywood with 0.8 mm thickness mica finish and top 25 mm thick plywood with mica postforming finish. this size table for 1 no.of monitor using for one table with railing keyboard, cpu shelf, foot rest. with one switch box and fixing 5 pin socket 3 nos., switches 3 nos. one indicator with finishing wiring., computer table (large) size: 55 x 23 x 48 (lxbxh) table body 18mm plywood with 0.8 mm thickness mica finish and top 25 mm thick plywood with mica postforming finish. one indicator with finishing wiring., office low back revolving chair made out of steel black colour, powder coating , finishing with base of size 22 inches with 05 nos. of legs with heavy moving wheel finishing, hydraulics, height adjustment, pushback, with locking facility, seat and back fully nylon wire knitting finish., steel cupboard file rack of size 66 x 24 x 18 (hxlxb) made out of 20 guage cr sheet with 3 nos. of shelf with each shelf separate door and locking arrangement with one coat red oxide and two coat enamel paint finishing.

CTN :39223165

26 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply of supply and installation of crca sheet along with structural material and painting

State Government

CTN :39204002

18 Feb, 2025 9.96 Lacs

Bengaluru - Karnataka

Tender For re-placing of deteriorated ac sheet shelter by precoated galvanized iron profile sheets for switchgear platform and other allied works at 220/66/11 kv sub-station hsr layout, bengaluru.

CTN :39175298

22 Feb, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of sofa set 3 seator premiun leather,sofa set 2 seator premiun leather,dining table 8 person with chair,workstation six seater module,premiun solid wood sofa cum bed,almirah steel made of crca sheet,looking mirror of dimensions

State Government

CTN :39156162

07 Feb, 2025 1.15 Lacs

Jaipur - Rajasthan

Tender For supply of electric items as per annexure-d at giral lignite project, rsmml, ceu lignite office, barmer. - p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes, din rail etc. as required 2.5 mm thick., providing & fixing of 240/415 v residual current circuit breaker (rccb) conforming to (ls:12640-1)/ iec 61008 -1 , rated 4 kv impulse withstand voltage truly current operated and shall operate on cbct mechanism, provision for pad lock min. operation 10,000 up to 63 a rating and 5000 for 100 a rating and minimum phase termination capacity of 35 sq.mm. rigid wire, ip 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. rccb 63 amp, 4 pole, providing & fixing of iso certified company made tp&n, 415 v ac-23a front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure (for panel mounting), as per pwd specification for electrical works conforming to is/iec 60947-3 : 1999 in existing panel with hbc fuses including making connections with lugs, testing etc as required sfu (switch fuse unit), 63 amp, 3 pole with handle, providing & fixing of 240/415 v ac mcb with positive isolation of 10ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, lsi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947- 2, low watt losses, trip free mechanism, energy limiting of class 3 as per iec, minimum phase termination capacity of 35 sq.mm. ,conductor line load reversibility, ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 up to 20 a rating and 10,000 up to 63 a, 5000 for 80 a & above rating including making, connections, testin~ etc. as re_quired., single pole mcb 6a to 32 amp, double pole mcb 6a to 32 amp pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia . ' b ' class g.!. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof polypropylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal. all as per pre approved by engineer in charge., providing and fixing 180 cm high fencing with angle iron post size 50x50x6mm placed at every 3 meters apart and 45cm in ground embedded in cement concrete 1:3:6 (30x30x60cm) corner and every 10th.post to the strutted with 50x50x6 mm angle iron provided with 6 horizontal lines and 2diagonals of g.!. barbed wire between two post fitted and fixed with g.!. staples including each works in excavation etc. complete., supply & laying following size earth strip in horizontal or vertical run in surface by means of earth strip dmc insulator including riveting/ soldering/ welding, jointing shall be done by overlapping and with 2 set of brass (for cu strip) / gi (for gi strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. all as per pre approved by engineer in charge. 25x3 mm copper strip 30mm x 6mm alum. strip, providing & fixing of iso certified company made lightning conductor finial as per pwd specification for electrical works as per is 2309-1989 made out of 25 mm dia.,300 mm long copper solid rod having single prong at top with 85 mm dia ., 3 mm thick copper base plate including holes etc. complete as required. all as per pre approved by engineer in charge. providing & fixing of recessed/surface mounting heavy duty enclosure made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is-8623-1 & 3 / iec 61439- 1 & 3. powder painted complete with din rail making i

CTN :39149038

07 Feb, 2025 1.80 Crore

Palakkad - Kerala

Tender For mgnregs material supply - 100 mm channel shoulder 2.5 m long, 100 mm s.c.i. trap with vent heel, 15 mm c.p.brass tap, 200 mm aluminium aldrop, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), amla(nelli) seeds, aryaveppu seeds, badam seeds, beam clamp 300-380 mm (450-1070 mm), bitumen washer, bitumen washer, bone meal(bone manure or ellupodi), brass bib-cock-15 mm dia, c.i. bracket for wash basin and sinks, c.p. brass waste 32 mm, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, chempakam seeds, chromium plated brass screws 25 mm, coarse sand (zone iii), column clamp 450x1070 mm, corner angle 45x45x5 mm 1.50 m long, corner angle 45x45x5 mm 2.50 long, cowdung, deharadun white lime, double clip (bridge clip), drumstick seeds, fine sand (zone iv), flats up to 10 mm in thickness, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), g.i pipes 50 mm dia, g.i. plain washer thick, galvanised steel j or l hooks 8 mm dia, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, green net 75% shade, guava (pera ) seeds, hard board 6 mm thick, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, interlocking c.c. paver block (60 mm thick, m-30), kudampuli seeds, m.s. tube 40 mm dia, mild steel round bar 12 mm dia and below, mild steel tubes hot finished welded type, neemcake(veppin pinnakku), njaval seeds, plastic emulsion paint, polyethylene water storage tank with cover and suitable locking arrangemnet, polyurethene bags, portland cement, precoated aluminium trafford sheet 0.450mm thick, precoated galvanised steel plain ridges, precoated glavanished iron profile sheet 0.50 mm tct, prop 2 m (2-3.5m), pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 20 mm outer dia 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, quarry waste, rawl plug 50 mm (designation 10 nos), rectangular shape 453x357 mm mirror with plastic moulded frame, red oxide zinc chromate primer, royalty for good earth, second class kail wood in scantling, single clip, solid blocks of size 30x20x15cm, solid blocks of size 30x20x20cm, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, stone aggregate(single size): 06 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, synthetic enamel paint in black or chocolate shade, through and bond stone size 24 x 24 x 39cm, twisted steel/deformed bars, vibrator (needle type 40 mm), vitreous china flat back wash basin 630x450 mm, vitreous china orrisa type w.c. pan size 580 mm, vitrified floor tile 60x60 cm, wall form panel 1250x450xmm, wall form panel 1250x500 mm, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, welding by electric plant, wire nails, 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), bright finished or black enameled mild steel screws 20 mm, bright finished or black enameled mild steel screws 40 mm, diesel oil, g.i. pipes 25 mm dia, g.i. pipes 40 mm dia, gi trafford profile sheet 0.35 mm thick, gutter pipe, hire charge of 10hp engine and pump set, mangalore ridge tile 20mm thick, mangalore tile 20mm thick, material - 75 mm valve, material-75 mm mta, mild steel round bar for reinforcement, muringa saplings, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, pvc 45 degree elbow 110 mm dia, pvc 45 degree elbow 63 mm dia, pvc 45 degree elbow

CTN :39149282

10 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For mgnregs material supply 2024-2025 - stone aggregate(single size) 40 mm nominal size, stone aggregate (single size) 10 mm nominal size, stone aggregate(single size) 20 mm nominal size, coarse sand (zone iii), portland cement, fine sand (zone iv), quarry waste, royalty for good earth, stone for masonry work, average rate of mild steel round bars for reinforcements - carriage of steel 1.05/10 = 0.105t/ twisted steel/deformed bars, twisted steel/deformed bars, galvanised steel corrugated sheets, mangalore tiles 20 mm thcik, mangalore ridge tiles 20 mm thick, precoated galvanised steel plain ridges, mild steel round bar above 12 mm dia, interlocking c.c. paver block (80 mm thick, m-30) - bedding layer - 50mm thick , black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality 300 x 300 mm in all shades designs except white, ivory, fume red brown etc., solid blocks of size 30x20x15cm, stone aggregate(single size): 06 mm nominal size, pvc pipe 15 mm outer dia. 12kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 20 mm outer dia 10 kfg/cm2 - (adding 15% for fittings wastage), pvc pipe 25 mm outer dia . 12 kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 25 mm outer dia. 10kgf cm2 - (adding 15% for fittings and wastage), pvc pipe 32 mm outer dia. 10kgf/cm2 - add 15% for fittings and wastage etc, pvc pipe 32 mm outer dia 6kgf/cm2 - add 15% fitting and wastage etc on (a), pvc pipe 40 mm outer dia. 10kgf/cm2 - add 15% for fitting and wastage etc on (a), pvc pipe 50 mm outer dia.6kgf/cm2 - (15% added for fittings and wastage etc), pvc pipe 15 mm outer dia. 12kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 20 mm outer dia 12 kgf/cm2 - (adding 30% for fittings wastage), pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc elbow 63 mm dia, pvc bend 63 mm dia, pvc elbow 75 mm dia, pvc tee 63x63x63 mm dia, pvc end cap 63 mm dia, pvc socket/coupling 63 mm dia, pvc reducer 63x50 mm dia, pvc door elbow 63 mm dia, pvc door tee 63 x63x63mm dia, pvc vent cowl 63 mm dia, empty cement bag - (country twine,stitching charge and needle), welding by electric plant - for cutting assembling & eretion, mild steel tubes hot finished welded type, galvinised wire mesh of average width of aperture 1:4 and nominal dia. of wire 0.63 mm, wire nails, pvc corrugated roofing sheets, pvc plain roofing sheets, 200 mm aluminium aldrop, iron hooks & eyes 100 mm, common burnt clay f.p.s. (non modular) bricks class designation 7.50, modular common burnt clay bricks of class designation 7.50, vitrified floor tile 60x60 cm, vitrified floor tile 50x50 cm, mild steel tubes hot finished welded type, galvanised steel corrugated sheets, precoated aluminium trafford sheet 0.45 mm thick, gi trafford profile sheet 0.35mm thick, gi chicken mesh ( 24 guage 12.5x12.5mm), precoated galvanised iron profile sheet 0.50 mm tct, green net 75% shade, twisted steel/deformed bars, g.i. plain washer thick, bitumen washer, galvanised steel j or l hooks 8 mm dia, citizen information board( public), citizen information board( private), sundries, binding wire, boots, hand gloves, finger gloves, hammer, pots, tarpaulin, chatti, mammaty, showel, lever, kotta, pick axe, mild steel round bar above 12 mm dia, centering & shuttering , vibrator (needle type 40mm), hire charges of concrete mixer 0.25 to 0.40 mm with hopper, green hose, pump set, g i sheet, wheel barrow, plastic drum, hire charge of 5 hp engine and pump set - materials, hire charge of 10 hp engin

CTN :39150425

12 Feb, 2025 1.33 Crore

Palakkad - Kerala

Tender For mahatma gandhi nregs- supply of materials to various work sites in sholayoor grama panchayat 2024-2025 - 0983 : fine sand (zone iv), 0982: course sand (zone iii), 0295: stone aggregate (single size): 20mm nominal size, 0293: stone aggregate (single size): 40mm nominal size, 0297: stone aggregate (single size):10mm nominal size, 0367: portland cement, 1.008: stone for masonry work, 1005: twisted steel bar, 7319: wall form panel, mr94: quarry waste, 0002: hire charge of concrete mixer, 0012: vibrator, mr186: precoated aluminium trafford sheet 0.45 mm, 0298: stone aggregate (single size):10mm nominal size, 1208: bitumen washer, 1209: g.i plain washer thick, 1219: wire nails, mr113: galvanised wire mesh, 4009: mild steel tubes hot finished welded type, 1215: welding by electric plant, 4202: red oxide zinc chromate primer, 0833: synthetic enamel paint in black or chocolate shade, 2406: float glass sheet of nominal thick 4mm, mr4: solid block of size 30x20x15cm, 0775 : deharadun white lime, 808: water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, 0815: dry distemper, 1154: stone for size 24x24x39cm, 0595 : bright finished or black enameled mild steel butt hinges 100 x 58x1.90mm, 0597 : bright finished or black enameled mild steel butt hinges 50 x 37 x1.50mm, 0640 : bright finished or black enameled mild steel screws-20 mm, 7800: ceramic glassed tiles first quality minimum thickness 5mm in all colours and designs, 7801: ceramic glassed tiles first quality 300 x300 mm in all colours and designs, 7103 : stainless steel kitchen sink without drain board 470 x 420mm boul depth 178mm, 1309 : ci braket for wash basin and sink, 1547 : gi pipe 25mm dia, 1885 : 15mm cp brass tap, mr80 : pvc bend 110mm dia, mr10 : anjili woods scantls, mr54 : pvc pipe 110mm outer dia 6kgf/cm2, pvc elbow 110mm dia

Central Government/Public Sector

CTN :39155315

08 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply, installation & commissioning of cable box & tool box in non lhb ac coaches for sgac coache s as per icf drawing no. icf/sk3-7-2-041 made of 1.2 thickness crca sheets confirming to is:513 (latest), the box a ssembly shall be powder coated to icf/md/specn-091 with siemens grey to shade card no. oj72 of m/s. asian paint s or its equivalent shade. the minimum coating thickness shall be of 50 microns, including with necessary clamps & nut bolts accessories for fixing. set contains 2 numbers 1. tool box -h 200 x w 250 x l 450 mm 2. cable box - h 200 x w 320 x l 10. [ warranty period: 30 months after the date of delivery ]

CTN :39140531

12 Feb, 2025 NA

Multi City - Karnataka

Tender For supply & installation of beacon library items to grama panchayath under k r pete taluk limits - table tp krpete, smart tv tp krpete, projector tp krpete, computer tp krpete, almirah made out of cr sheet with 20x22 gauge and size 78 inch height x 36 inch width and 19 inch depth with silver color., p type chiar made out of frame material iron, seat material polyester arm type with armrest cushion seat & back cushion back type medium back dimensions (lxwxh) 53.3cm (d) x 53.3cm (w) x 45.7cm (h)product color. pink, black and silver.

Cr Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector