Get complete information related to latest Cr Sheet Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cr Sheet Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cr Sheet Tenders.
Tender For supplying, erecting, testing & commisioning 10 kvar, 440 v, 3 phase, 50 hz., apfc panel with contactor logic with intelligent microprocessor relay, consisting of 1, 1, 2, 2, 4 or suitable steps of app / mpp type capacitor units with detuned (harmonic filter) reactors of suitable rating, apfc panel shall be compliance to iec 61439 and power quality iec 61921 standard made of crca sheet 16 swg with antirust treatment & duly powder coated complete.
Tender For corrigendum : supply and installation of ac machines and other electrical equipment for the office of wbscvt at room no. 414 of karigari bhawan, rajarhat new town, kolkata -160 - distribution wiring in 1.1 kv grade 2x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) partly in 20mm size pvc rigid conduit fr (precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire for ecc, to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gi switch board complete with 2 no. suitable size ph & n copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only pvc rigid conduit on ceiling and remaining portion concealed] (avg run 10 mtr), distribution wiring in 1.1 kv grade 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make), with 1.1 kv grade 1 x 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire as ecc, to 6a 3 pin modular type plug socket & switch (brand approved by eic) on 4 module gi switch board with 3/4 module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building workson board, supply & fixing 240 v, 6 a, 3 pin modular type plug socket (brand approved by eic) with 6a modular type switch, without plug top on 4 module gi modular type switch board with 3 module top cover plate flushed in wall incl. s&f switch board and cover plate and makingnecy. connections with pvc cu wire and earth continuity wire etc [for laptop charging], supply & fixing 240 v, 3 nos. 16 a, 3 pin modular type plug socket with 3 nos. 16a modular type switch (brand approved by eic), 20a modular switch type sp mcb (c-curve) and indicator without plug top on 2 row 12 module gi modular type switch board with 2 row 12 module top cover plate flushed in wall incl. s&f switch board and cover plate and making necy. connections with pvc cu wire and earth continuity wire etc.[for sound system & projector], distribution wiring in 1.1 kv single core stranded frls pvc insulated & unsheathed copper wire (finolex / havells/ kei / gloster /approved by eic) in suitable size ( 40/32/25 mm ) pvc rigid conduit fr (precision make) incl. necy. fittings as required 2 x 2.5 sqmm + 1 x 1.5sqmm [for power plug ], 2 x 4 sqmm + 1 x 2.5 sqmm [for ac ], 3 x 1.5 sq mm [for 6 amp plug and other ckt], finishing of the pvc insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per g s 2.5 sq mm, 4.0 sq mm, supply & fixing of 250v 50 hz olp- 30a single phase a.c starter ( make -electron, / pwd appvd ) suitable for 1.5 / 2.0 tr airconditioner machine incl s & f suitable size g i box (16 swg) flushed in wall with voltage check, amp check, time check incl. making connection as per direction of eic. [for ac connection], supply & fixing 240 v, 25 a, 3 pin modular type plug socket (brand approved by eic), without plug top and switch with 2 module gi modular type switch board with top cover plate flushed in wall and making necy. connections with pvc cu wire and earth continuity wire etc as per g.s.[for ac connection], supply & fixing 240 v,25 a, 3 pin modular type plug top with indicator (brand approved by eic) & necy. connections.[for ac connection], supply & fixing of 36 w -2 x 2 recess mounted led luminaries made in crca sheet metal with a wider light window and also with an opal acrylic diffuser for a spotless and grade free uniform lighting and the fitting complete with all accessories to crompton make cat no - polaris nio - i lctlrne-36
Tender For corrigendum : supply of various rubber items /gasket/sheet at wtps. - 100percentneoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100percentneoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, neoprene rubber oil seal 65 x 85 x 10 mm, rubber oil seal, size:35x52x10 mm, oil seal size:35x47x7 mm, rubber oil seal, size: 35x50x10 mm (for shapping m/c), oil seal size 42 x 65 x 10 mm fanner/pioneer/sunny, oil seal 25*37*7mm of hot well make up pump, rubber spider for love joy coupling for l-70, rubber spider (star bush) for love joy coupling l-075, rubber spider for love joy coupling size l-095, rubber spider (star bush) for love joy coupling l-100, rubber star bushing l110 make : " rathi love joy", rubber gasket of journal bearing, drg no-wtps-st-ii/003-03-356 for p.a. fan type ndv 22 tiefstack, viton rubber cord 08 mm dia., neoprene rubber cord 3.0 mm dia., neoprene rubber cord 6.0 mm dia., neoprene rubber cord 8.0 mm dia., neoprene rubber cord 10.0 mm dia., viton rubber cord 03 mm dia., viton rubber cord 04 mm dia, viton rubber cord 05 mm dia., viton rubber cord 06 mm dia., viton rubber cord 10 mm dia., neoprene rubber cord 12.0 mm dia., sealing ring of 450 mm sarcko make butterfly valve, 150 nb butterfly valve seal ring., 200 nb butterfly valve seal ring., 200 mm sleeve coupling rubber ring for 200 mm, 250 mm sleeve coupling rubber ring, 350 mm sleeve coupling rubber ring, 400 mm sleeve coupling rubber ring, bush o.d- 50 mm x id- 27 mm x 14 mm length, spider for bottom ash clinker grinder at ahp-8., rubber bush of fan coupling, drg no wtps / oo3 / 03 / 744 for p.a. fan type ndfv-22b, rubber bush of fan coupling, drg no wtps / oo3 / 03 / 604 for p.a. fan type ndfv-22b, rubber spider (star bush) for love joy coupling l-150, rubber spider (star bush) for love joy coupling l-190, rubber bush set (pad) for cold fill pump lov joy jaw flex.spacer coupling, (coupling type cq, size cq-276) kirlosker make pump., oil seal size 12 x 22 x 6 mm for p.a. fan l.o.p. of stage- i, oil seal size 42 x 72 x 10 mm fanner/pioneer/sunny, oil seal size 25 x 42 x 6 mm fanner/pioneer/sunny/, rubber oil seal 25x42x7 mm, rubber oil seal- 25x42x10, oil seal size:30x50x7 mm, oil seal size 45 x 60 x 10 mm fanner/pioneer/sunny, oil seal size: 75x95x10, oil seal size 65x90x10 mm, oil seal size 24 x 40 x 8 mm, oil seal size 30 x 72 x 8 mm
Tender For repair to leakage/seepage of shaft area removing of vegetation growth, reapair to ci/pvc pipe line crumple sheet and other connected works at rs colaba , rashi area repair to inter locking paver blocks repair/replacement of gully trap repair to fenc
Tender For supply of supply of inverter type hot and cold 1.5 tr with 4 star bee rating air cooled cassette type air conditioners , itc of inverter type hot and cold 1.5 tr with 4 star bee rating air cooled cassette type air conditioners , supplying and fixing of powder coated ms frame stand , vaccumiazation and nitrogen testing of foll. a. 6.4 mm dia soft drawn with tube thickness 1.2 mm with 19 mm thick insulation , 15.56 mm dia od soft drawn with tube thickness 1.2 mm with 19 mm thick insulation , providing and fixing 25 mm size dia upvc pipe from outlet socket of ac unit , supply and fixing of 4c x 1.5 sq.mm pvc insulated copper conductor cable for control cum transmission , supply and fixing of 3c x 2.5 sq.mm pvc insulated copper conductor cable ac power supply cable , supplying and fixing dp sheet steel enclosure , s and installing 100 mm width x 50 mm depth x 1.6 mm thickness nominal size hot dipped galvanised iron cable tray
Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast
Tender For tender for supply of procurement of raw materials d d - austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar c , brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , naval brass rods , condition annealed , conforming to is 291 1989 , grade 1 , / hal std 1302 / bs 282 , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / ast , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3 , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on bo , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on bo , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on bo , alclad al.alloy sheets , spec. 2014/2014 a-t6 /wp , cladding 1050 a /1070/19500/19700/6003 on both sid , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on bo , one side/two sides polished(ra 0.2 microm) non-fading black electro coloured anodized ( as per mil-a-862 , ptfe/teflon round conforming to hal std 6251 mil-p-19468a or astm-d-1710 , grade-ii , type -3 , class-d , nylon round type -66. dia 12 mm.hal std 1851 , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 oz coppe , nylon sheet conforming to hal std 1853 , mil-p-20693 a , type-i , size thickness 6 x 1000 x 1000 mm , glass epoxy laminate sheet conforming to hal std 1807 bs 3953-1990 grade ep3 (or) ep4 (or) bsen